• ●Up to a hundred AW-HE50S/H units can be controlled via IP connections when using network hub (switching hub).
• ●IP addresses are automatically assigned to the AW-HE50S/H or AW-HS50 by the Automatic IP Address Setup function.
• ●One remote camera can be controlled simultaneously by up to five AW-RP50 units via an IP connection.
• ●Connection settings for the AW-RP50 can be configured with a PC. (configuration software supplied)

•IP-control performance depends on network conditions.

•Video signals cannot be transmitted via IP.

•Connection is not available with using the public network.

• ●The camera setting information (such as iris and gain) acquired by the unit is displayed through the AUX output of the switcher or on the split-screen of MultiViewer.
• ●Acquires the ON AIR tally information of the switcher and lights the tally LED on the panel.
• ●Bus images can be changed by linking them to the camera selection. (Control bus targets : AUX, PVW, PinP, KEY-F)
• ●The switcher's MultiViewer screen can be changed to the camera image full screen with a one-touch button operation.
  (Control bus target : AUX only)
• ●Parameters such as the PinP position of the switcher can be changed with the pan/tilt lever.