TOP | What's NEW | News and Information | Users Reports | Service and Support | Japanese

AJ-HPS1500
Specifications

Options

Panel and Connectors

Brochure PDF

P2HD Series

TOP
* The PDF version of this catalog is correct as of the time of publication. Note that information such as company and organization names may no longer be correct.
General Specification
Power Source: AC 100-240 V, 50/60 Hz
Power Consumption: Max. 80 W (Full option), 72W (No option)
Operating Temperature: 5°C to 40°C (41 °F to 104 °F)
Operating Humidity: 10% to 80% (no condensation)
Weight: 14 kilograms (30.9 lbs)
Dimensions (W x H x D): 424 x 175 x 415 mm (16-3/4" x 6-15/16" x 16-3/8",excluding feet, connector and jog dial.)
Recording Format: DVCPRO HD/DVCPRO 50/DVCPRO/DV switchable
AVC-Intra 100/50 (option)
Recording Video Signal: 1080/50i, 1080/59.94i, 720/50p, 720/59.94p, 576/50i, 480/59.94i
Audio Recording Format: DVCPRO HD:48kHz/16bits, 8CH
DVCPRO 50:48kHz/16bits, 4CH
DVCPRO/DV:48kHz/16bits, 2CH/4CH switchable
Recording Media: P2 card
Recording/Playback Time*1: [AVC-Intra100*2/DVCPRO HD, 8CH audio]
by single card using 6 card slot
AJ-P2C016RG Approx. 16 min. Approx. 96 min.
AJ-P2C032RG Approx. 32 min. Approx. 192 min.
Recording/Playback Time*1: [AVC-Intra 50*2/DVCPRO 50, 4CH audio]
by single card using 6 card slot
AJ-P2C016RG Approx. 32 min. Approx. 192 min.
AJ-P2C032RG Approx. 64 min. Approx. 384 min.
Recording/Playback Time*1: [DVCPRO/DV, 2CH audio]
by single card using 6 card slot
AJ-P2C016RG Approx. 64 min. Approx. 384 min.
AJ-P2C032RG Approx. 128 min. Approx. 768 min.
*1: Time shown above is when you record a series of 1 shot to P2 card. Depending on numbers of shots you record, time will get shorter than the number shown above.
*2: When using AVC-Intra Codec Card AJ-YAB200G.
Digital Slow: -1 to +1 times normal speed
Video Specification (Digital Video )
Sampling Frequency: AVC-Intra 100/AVC-Intra 50/DVCPRO HD (59.94Hz):Y:74.176MHz, PB/PR:37.088MHz
AVC-Intra 100/AVC-Intra 50/DVCPRO HD (50Hz)
Y:74.25MHz, PB/PR:37.125MHz
DVCPRO 50:Y:13.5MHz, PB/PR:6.75MHz
DVCPRO:Y:13.5MHz, PB/PR:3.375MHz
Quantizing: 8 bits
Video Compression Format: DV-Based Compression (SMPTE370M, 314M)
Video Compression Ratio: DVCPRO HD:1/6.7
DVCPRO 50:1/3.3
DVCPRO/DV:1/5
ErrorCorrection: Reed-Solomon product code
Video Bit Rate: DVCPRO HD:100 Mbps
DVCPRO 50:50 Mbps
DVCPRO/DV:25 Mbps
Audio Specification (Digital Audio )
Sampling Frequency: 48 kHz (sync video)
Quantizing: 16 bits
Frequency Response: 20 Hz to 20 kHz, ±1.0 dB (reference level)
Dynamic Range: More than 90 dB (1 kHz, emphasis off, "A" weighted)
Distortion: Less than 0.1% (1 kHz, emphasis off, reference level)
Cross Talk: Less than -80 dB (1 kHz, between 2 channels)
Headroom: 12/18/20 dB switchable
De-emphasis: T1=50 μsec, T2=15 μsec (on/off auto)
Video Output Adjustment Range
Output Gain: -∞ to + 3 dB or -∞ to + 6 dB
Chroma Output Gain: ± 3 dB
Chroma Phase: ± 30°
SC Phase: ± 180°
Serial Digital (Video/Audio) Input/Output
HD-SDI/SD-SDI Input switchable: BNC x 1
Video:SMPTE 292M/296M/259M-C standard
Audio:SMPTE 299M/272M-A (480/59.94i)/
ITU-R BT.656-4 standard (576/50i)
HD-SDI/SD-SDI Output switchable: BNC x 2
Video:SMPTE 292M/296M/259M-C standard
Audio:SMPTE 299M/272M-A (480/59.94i)/
ITU-R BT.656-4 standard (576/50i)
SD-SD MonitorI Output: BNC x 1 (superimpose)
Video:SMPTE 259M-C
Audio:SMPTE 272M-A (480/59.94i)/
ITU-R BT.656-4 standard (576/50i)
Video Input/Output
Analog Composite Input: BNC x 1 Video: 1.0Vp-p (75Ώ Auto termination)
BNC x 1 Loop-through
Reference Input switchable: Black burst or HD tri-level sync
BNC x 1 (75Ώ Auto termination)
BNC x 1 Loop-through
Analog Composite Output: BNC x1 (superimpose on/off)
Audio Input/Output
Analog Input: XLR x 2 (CH1/CH2), 600Ώ/high-impedance switchable,
+4/0/-3/-20 dBm switchable
Digital Input: BNC x 4 (CH1/2, CH3/4,CH5/6, CH7/8),
AES/EBU format SMPTE 276M
Digital Output: BNC x 4 (CH1/2, CH3/4,CH5/6, CH7/8),
AES/EBU format SMPTE 276M
Monitor Output: XLR x 2, low-impedance, +4/0/-3/-20 dBm switchable
Headphones: M3, 8Ώ, variable level
Other Input and Output
Time Code Input: BNC x 1, 0.5 to 8.0 Vp-p, 10 kΏ
Time Code Output: BNC x 1, low-impedance, 2.0±0.5 Vp-p
RS-422A Input: D-sub 9 pin RS-422A I/F
RS-232C: D-sub 9 pin RS-232C I/F
Parallel: D-sub 25 pin
Encoder Remote: D-sub 15 pin
USB2.0: Host x 1, Device x 1
LAN: 100 BASE-TX/10 BASE-TX x 1
SD Card: SD Memory Card Slot x 1
Weight and dimensions shown are approximate.
Specifications are subject to change without notice

Footer navigation area begins from here.