This table shows the test results with the specified terms and conditions.Operation in this combination is not guaranteed.
It is required for the proper drivers to be installed according to each P2 model number in order to connect to a computer and transfer files by USB2.0, 1394 and PCI Express interfaces.
When connecting a 1394 or USB cable to computer or P2 equipment, please check the shape of the connector and connect it in the right direction.
It is not possible to overwrite recorded clips in an arbitrary position to realize scene-to-scene continuity like tape since P2 clips cannot be edited and overwritten partially in P2 equipment and the play back order of P2 clips can not be changed, other than as a playlist in P2 mobile.
(*1) When dubbing DVCPRO50 signal on HVX200E via 1394 AVC stream from deck or camera such as AJ-SPD850E or SD93E, S200 or S400 should be set for DIF SPEED menu on the DVCPRO50 playback equipment.
(*2) An optional AVC-Intra Codec Board AJ-YBX200G is necessary to record and play back AVC-Intra clips.
, : tested connectivity
N/A : not applicable. Blank space means TBA.
: copy data from P2 equipment only : copy data from / to P2 card
Windows2000
Service pack 4
Windows XP
Professional
Service pack 2
Windows Vista
Business, Ultimate
Mac OS X 10.4.6
(Power PC)
Mac OS X 10.4.6
(Intel)
USB2
1394
USB2
1394
USB2
1394
USB2
1394
USB2
1394
AJ-PCS060G
N/A
N/A
N/A
(*1)
N/A
N/A
AJ-PCD10P,E
N/A
N/A
N/A
N/A
N/A
N/A
N/A
AJ-PCD20P,E
N/A
N/A
N/A
(*1)
Clips from AJ-PCS060G might not be able to be imported by Final Cut Pro,when the copied clip is incomplete caused by a power failure while copying the clip from P2 card to HDD, for example.
In such a case, please write the data in the AJ-PCS060G back to a P2 card, and then erase the error clip marked“X” on the thumbnail.
P2 compatibility table
