Head on this page.

AG-HPD24

Specifications PDF

Options

Panel and Connectors

Brochure PDF

Other manufacturers'
”AUTO REC” verified
Camera list

P2HD Series

TOP


AVC-Intra to QuickTime Transcoder software for FinalCutPro

P2 Memory Card Recorder: Lower Operating Costs, Better for the Environment

The P2 Card Helps Preserve the Environment:
Repeated Reusability and Low Power Consumption
Allowing repeated file copying and initialization, a single P2 card can be used and re-used, again and again. When combined with an IT-based workflow that requires no dubbing, P2 cards can greatly reduce storage media expenses.

Image of Reuse

AG-HPD24

AG-HPD24

A compact P2 deck with 24P and 3D compatibility
for studio production and on-air transmission.

Memory Card Portable Recorder

AG-HPD24

A High-Performance P2 Portable Deck in a Half-Rack Size
AVC-Intra Recording, HDMI*1 Output and USB 3.0*2 Interface
2-Unit Sync Operation Records and Plays Superb 3D Images
Versatile Functions for Broadcasting and Image Production Work

*1: Supports 3D
*2: USB3.0 host interface


High-End Production with AVC-Intra Codec, 24 bit Audio, and 24 PsF.

AVC-Intra Codec

The AVC-Intra codec further advances HD production. It complies with the MPEG-4 AVC/H.264 international standard based on advanced image compression technology, and offers both superb image quality and highly efficient compression. It uses an intra-frame compression system to bring important advantages to professional editing. The AG-HPD24 can record in AVC-Intra 100 for maximum picture quality or in AVC-Intra 50, which adopts a lower bit rate, for versatile operation. It also supports the DVCPRO HD codec.
• AVC-Intra 100: With the same bit rate as DVCPRO HD, this mode gives you full 10 bit recording with 1920 x 1080* pixels. It captures masterquality video for high-end image production.
• AVC-Intra 50: This mode delivers video quality very similar to DVCPRO HD with 1440 x 1080* pixels, yet is able to do so at bit rates usually associated with standard definition (e.g. DVCPRO 50). AVC-Intra 50's lower bit rate doubles the recording time and cuts the data transfer time in half.

* These figures are for 1080i/p mode. The AG-HPD24 also supports 720p mode.

24PsF Compatible, HD/SD Multi-Format

Handling a wide range of HD formats, such as 1080p, 1080i and 720p, the AG-HPD24 can be switched between 59.94 Hz and 50 Hz to adapt to the world's HD broadcasting formats. The AG-HPD24 supports 1080/24p native recording and playback with the AVC-Intra codec. HD SDI mode provides 1080/24PsF input/output for use in high-end movie production. And SD recording in both NTSC (480i) and PAL (567i) are available with multi codec (DVCPRO 50, DVCPRO, DV).

Up-/Down-/Cross-Conversion

The AG-HPD24 can convert up or down between HD and SD or crossconvert between 720p and 1080i during playback. It also features an
aspect conversion function.

* Only cross-conversion is available in 3D mode.
* The closed caption signal in the SD signal is not output during up-/down-/cross-conversion playback.

VariCam Speed Effects

The AG-HPD24 can extract active frames from VFR (variable frame rate) signals output by a VariCam and record them in 720/24p. VariCam-like 60p pull-down output can also be provided by playing back a video clip in a P2 card recorded in native 720/24p by the AJ-HPX2700, the AG-HPX500 Series, the AG-HPX370 Series, the AG-HPX170 Series or the AG-HPX250 (scheduled for release in Autumn 2011) P2HD camera recorders.

* Not supported in 3D mode.

Gamma Conversion for Cinema Production

This function converts images recorded by a VariCam or images recorded in the Film Rec mode of the AJ-HPX3100 to the same kind of film-like look as the Telecine 5 or Telecine 6 mode of the AJ-GBX27G HD Gamma Corrector. It can also convert to the Cineon curve for film-recording.

High-Quality 24 bit Audio Recording

AVC-Intra mode features high-quality 24 bit digital audio recording. You can select either 24 bit 4 channel or 16 bit 8 channel recording. DVCPRO HD mode provides 16 bit 8 channel, and DVCPRO 50/DVCPRO/DV mode includes 16 bit 4 channel recording.

* To play video clips recorded with 24 bit audio, use a 24 bit-compatible P2 device or P2 viewer. A P2 device that is not 24 bit compatible will display the clip number in red, and playback will not be possible. A P2 viewer that is not 24 bit compatible will not produce normal sound. Use the latest P2 viewer version. For current information on 24 bit-compatible P2 devices and P2 viewers, see " Service and Support ".

Excellent Reliability and Mobility with the P2 Card

The P2 card offers a large capacity of up to 64 GB* in a small, lightweight package. Its rugged design withstands even harsh professional use. It is highly resistant to temperature fluctuations, dust, impact and vibration, and is free of the problems that are common in tapes, such as condensation, head clogging and dropouts. The P2 card promises solid reliability and excellent mobility under the often difficult conditions of field recording. Because data is automatically recorded in blank card spaces, there is no need for cueing and the risk of accidentally overwriting valuable data is eliminated.

* Total card capacity includes space for data management such as system data; therefore, the actual usable area is less than the capacity indicated on the card. For details on recording times, see the table below on the compatibility of input signals and recording formats.

AG-HPD24 Corresponding Input/Recording Formats

HD Input
Signal		 Recording
Format		 Recording Time*1
(With Two 64 GB P2 cards)		 SDI Output*2
AVC-Intra100 AVC-Intra50 DVCPRO HD 1080 720 480/576
1080/59.94i 1080/59.94i Approx.128min. Approx.256min. Approx.128min. 1080/59.94i 720/59.94p 480/59.94i
1080/50i 1080/50i Approx.128min. Approx.256min. Approx.128min. 1080/50i 720/50p 576/50i
1080/23.98p over 59.94i*3 1080/23.98pN*4 Approx.160min. Approx.320min. ─ 1080/23.98PsF
 ─ ─
1080/59.94i Approx.128min. Approx.256min. Approx.128min. 1080/23.98p over 59.94i 720/23.98p over 59.94p 480/23.98p over 59.94i
1080/23.98PsF 1080/23.98pN*4 Approx.160min. Approx.320min. ─ 1080/23.98PsF ─ ─
1080/24PsF 1080/23.98pN*4 Approx.160min. Approx.320min. ─ 1080/24PsF ─ ─
720/59.94p 720/59.94p Approx.128min. Approx.256min. Approx.128min. 1080/59.94i 720/59.94p 480/59.94i
720/50p 720/50p Approx.128min. Approx.256min. Approx.128min. 1080/50i 720/50p 576/50i
720/23.98p over 59.94p*3 720/23.98pN*4 Approx.320min. Approx.640min. Approx.320min. 1080/23.98PsF ─ ─
720/24p over 60p*3 720/23.98pN*4 Approx.320min. Approx.640min. Approx.320min. 1080/24PsF ─ ─

SD Input Signal Recording
Format		 Recording Time*1
(With Two 64 GB P2 cards)		 SDI Output*2
DVCPRO 50 DVCPRO/DV 1080 720 480/576
480/59.94i 480/59.94i Approx.256min. Approx.512min. 1080/59.94i 720/59.94p 480/59.94i
480/23.98p over 59.94i 480/59.94i 1080/23.98PsF*5
1080/23.98p over 59.94i		 720/23.98p over 59.94p 480/23.98p over 59.94i
576/50i 576/50i 1080/50i 720/50p 576/50i

• 3D recording and playback is possible only in the AVC-Intra codec.
*1: All of the times apply when single clips are recorded continuously one after the other on the P2 card. Depending on the number of the clips to be recorded, the recordable time may be shorter than the times given.
*2: Settings must be made on the menu screen (system frequency mode).
*3: 2-3, 2-3-3-2 or 2-2 pull-down output signal from P2HD Camera Recorder or DVCPRO HD Camera recorder.
*4: N=Native This mode records only effective frames. *5: Output is produced only when the playback system frequency is set to 23.98 or 59-23.


A Host of Broadcasting and Image Production Functions and Interfaces.

Advanced Recording Functions Employing Two Card Slots

In addition to continuous, double-card recording, the AG-HPD24 enables some useful recording functions that are possible only with memory cards.
• Hot-Swap Rec: Thanks to the two card slots, you can hot-swap P2 cards for continuous non-stop recording. With multiple cards you can record for hours without interruption.
• Auto Rec: This function automatically starts recording in response to SDI video input.
• Loop Rec*: This function continuously records video data onto available memory card areas. When the card becomes full, older data is deleted to free up the recording area, resulting in loss-less, endless recording. When used with cameras for time-sensitive information gathering like weather and news reporting, the loop rec function holds the latest video data for a predetermined time period.

* Not supported in 3D mode.

Text Memo, Shot Marker and Metadata

• Text Memo: When recording or previewing a clip, you can attach a memo (similar to a bookmark) at a desired location (up to 100 locations on a frame basis). The simplified editing function* lets you copy a segment between memos and create a new clip. Text information can be added to a memo.
• Shot Marker: During or after recording, you can mark each clip with OK, NG or another designation.
• Clip Metadata: This function lets you browse and edit metadata, such as the name of the camera operator and reporter, shooting location and text memos. Text data can also be easily inserted by connecting a USB or software keyboard, and metadata files can be uploaded from an SD/SDHC card.

* Not supported in 3D mode.

USB Keyboard Connection

The USB 2.0 keyboard terminal lets you connect an ordinary USB keyboard for easy metadata text input. A software keyboard is also provided.


Clip Thumbnail Display with Free Clip Sequencing

Using the clip thumbnail (image list) display, you can select clips for instant playback, deletion, copying* or resequencing. This makes it easy to gather and display clips for broadcasting or editing. The advanced GUI displays the clip properties on the same screen as the clips and clearly shows the source data – with scroll bar, clip count and playback position – at a glance. The thumbnail display can be changed to show any of the images in the clip.

* Not supported in 3D mode.

Versatile Playback Functions Meet Diverse Needs

• Format Auto Playback: This automatically detects the video format and codec for each video clip to play back and output.
• Variable Speed Playback: For slow-motion and double-speed playback.
• PB Position Selection: This lets you select the playback position when playing from a thumbnail image. You can select from three different options: Previous playback position, thumbnail time code position, or the beginning of the clip.
• Repeat Playback: This plays the selected clip (single or multiple) repeatedly.

Waveform or Vectorscope Display

The AG-HPD24 has waveform and vectorscope display functions for the playback or input video signal on the LCD monitor. It can also display on Video Out and SDI Out.


Example of a waveform display

User Buttons/User Files

You can select from a total of 31 functions for allocation to the six user buttons. These settings are saved internally and protected when the power is turned off. They can also be easily checked on a diagnostic display. An user file containing the settings can be saved onto an SD/SDHC card.


In a Compact, Lightweight 2U Half-Rack Size.

USB 3.0 Interface Allows High-Speed Transfers*1 to an External Storage*2

USB3.0/External Storage• USB 3.0 (Host): AVC-Intra 100 codec files can be copied to external storage at approximately 4 times normal speed.*3
• USB 2.0 (Device): Device mode allows use as a P2 card drive for a PC (nonlinear editor).
• Playback: P2 MXF files on an external storage can be displayed as thumbnails and played back.*4 P2 audio playback is uninterrupted by slow hard disk performance, or when vibration temporarily delays data reading.

*1: Not supported in 3D mode.
*2: 2 TB or more cannot be used.
*3: For AVC-Intra 100 or DVCPRO HD.
*4: Playback is based on disk drive performance, including spindle speed. Panasonic cannot guarantee smooth playback without dropped frames.

HDMI Digital HD Output (3D Compatible)

The AG-HPD24 features an HDMI output terminal, the next-generation interface for HD images and sound. This provides digital output for a wide variety of both professional and consumer devices. It is also compatible with 3D images.

* HDMI output and SDI output cannot be used simultaneously.
* An optional adaptor cable may be necessary for connecting a professional monitor.

RS-422A Remote

The AG-HPD24 also features the same RS-422A remote terminal (9-pin) that is found on many broadcast VTRs, allowing it to be controlled as a player by an external editing controller.

HD/SD SDI Input/Output Terminals

HD/SD SDI input and output terminals are provided as standard equipment. This enables high-quality line recording using signals from a video camera or a video switcher. When connected to a camera recorder, the AG-HPD24 syncs Rec Start/Stop with the camera trigger. On-Screen Display (OSD) and thumbnail displays can also be output.*

* Not supported in 3D mode.

Analog Input/Output Terminals

The AG-HPD24 has Ref input, analog video (composite) output,* XLR analog audio inputs (Ch 1/Ch 2), audio monitor outputs (L/R), time code
input/output, and a headphone jack.

* This is not output when the system frequency is 24 Hz. Also, the left image is output during 3D mode.

2U Half-Rack Size and Battery Drive

Half-rack size with a 2U height, the AG-HPD24 weighs only about 2.0 kg (4.41 lb). Mounting the large battery (CGA-D54/5,400 mAh) enables 160 minutes of continuous playback. The included AC adaptor allows operation from an AC power source.

Front Speaker

Audio can be monitored from the front speaker.

 


2-Unit Sync 3D Mode Supports High-Qualit y FULL HD 3D Production.

Left/Right Sync Recording from a 3D Camera

Dual HD SDI (left/right video) signals from a 3D rig-type camera system or an integrated twin-lens 3D camera, such as the AG-3DA1 or AG-3DP1 (scheduled to be released in Winter 2011), can be sync recorded on two AG-HPD24 decks (left image on the first deck, and right image on the second). The AVC-Intra codec records high-quality images with full-pixel HD and full sampling data for both left and right channels for high-end 3D image production.

*3D recording is possible only with the AVC-Intra codec.

*2: When the "Setup" "System" "Frequency" menu item is set to 59.94 Hz or 50 Hz, only a black burst reference input signal can be received for the 3D record and playback modes and sync playback mode. When this menu item is set to 23.98 Hz or 24 Hz, only an HD tri-level sync reference input signal can be received.

Left/Right Sync Playback on a 3D Monitor

The left and right images from two AG-HPD24 decks can be played back in sync. HDMI output is possible to a home-use 3DTV, or HD SDI dual output is possible to a professional 3D monitor or projector. Using the control panel of the master (left) AG-HPD24, left/right sync operations include Rec Start/Stop,*1 Clip Thumbnail Display, Clip Playback*1 (including variable speed playback), Clip Delete, Text Memo, and Shot Marker addition. This makes 3D images as easy to handle as 2D images.

*1: External remote control is also possible via the RS-422A terminal.

 

Return to Top