AG-UX90 + ATOMOS NINJA FLAME HDMI Test Result

Menu settings for HDMI connection to start NINJA FLAME recording by AG-UX90 REC trigger

Product AG-UX90 (Ver. 1.02) NINJA stand-alone recording *1 AG-UX90 REC trigger to NINJA *2
Menu settings USER SW > USER1 AUTO REC
OUTPUT SETUP > REMOTE REC ON ON
OUTPUT SETUP > REMOTE REC LINK OFF ON
OUTPUT SETUP > HDMI TC OUTPUT ON ON
Product ATOMOS NINJA FLAME (Ver. 7.12)
Menu settings SOURCE HDMI
TRIGGER HDMI
  • *1:You can assign "AUTO REC" function to an user button of AG-UX90 for the trigger REC.
  • *2:You can use AG-UX90 REC start/stop button for the trigger REC.

AG-UX90 + ATOMOS NINJA FLAME HDMI connection

AG-UX90 settings Test Result
REC Format
(MOV/MP4)
Resolution FPS Bit rate Camera
REC
Control
ProRes422
(HQ, LT)
recording
Note
UHD/30p 3840 x 2160 29.97p 100Mbps OK OK *1
UHD/25p 25.00p OK OK
UHD/24p 23.98p OK OK
FHD/60p 1920 x 1080 59.94p 50Mbps OK OK
FHD/50p 50.00p OK OK
FHD/30p 29.97p OK OK *1, *2
FHD/25p 25.00p OK OK
FHD/24p 23.98p OK OK
FHD/60i 59.94i OK OK *1
FHD/50i 50.00i OK OK
  • *1:When NINJA FLAME starts recording by AG-UX90 REC trigger, the recorded ProRes422 (HQ, LT) timecode might be different from AG-UX90 around 1 frame.
  • *2:In the case of AG-UX90 VFR (variable frame rate) mode, the NINJA FLAME recording is 1980 x 1080 59.94p, or 1980 x 1080 50p normal recording.
AG-UX90 settings Test Result
AVCHD
mode
REC
Format
Resolution FPS Bit rate Camera
REC
Control
ProRes422
(HQ, LT)
recording
Note
PS FHD/60p 1920 x 1080 59.94p 28Mbps OK OK *3
FHD/50p 50.00p OK OK
PH FHD/60i 59.94i 21Mbps OK OK
FHD/24p 23.98p OK OK
FHD/50i 50.00i OK OK
HA FHD/60i 59.94i 17Mbps OK OK
FHD/50i 50.00i OK OK
HE HD/60i 1440 x 1080 59.94i 5Mbps OK OK
HD/50i 50.00i OK OK
PM HD/60p 1280 x 720 59.94p 9Mbps OK OK
HD/50p 50.00p OK OK
SA SD/60i 720 x 480 59.94i Not supported.
SD/50i 720 x 576 50.00i
  • *3:When NINJA FLAME starts recording by AG-UX90 REC trigger, the recorded ProRes422 (HQ, LT) timecode might be different from AG-UX90 around 1 frame.