Notes when using expressP2 card D series
Read the following details before using the expressP2 Card D Series.
Software version up or exchanging hardware is required in some cases.
| Product | Required | Detailed information | |
|---|---|---|---|
| Camera | VariCam 35 | Firmware Update | Ver.9.00-00-0.02 RECORDER Ver.9.00-00-0.06 |
| VariCam HS | Firmware Update | Ver.8.00-00-0.00 RECORDER Ver.8.00-00-0.18 | |
| VariCam LT | Firmware Update | Ver. 40.66-00-0.00 | |
| Recorder | AJ-ZS0580 | Firmware Update | Please contact your vendor. |
| AJ-URD100 | Firmware Update | Please contact your vendor. | |
| Drive (Card Reader) |
AU-XPD3 | Firmware Update | Ver. 0.7E-00-04.24 |
| AU-XPD1 | Firmware Update*1 | Ver. 2.22 | |
| Software | P2 Viewer Plus | Firmware Update | Ver. 2.3.25.0 or later |
| P2 driver | Firmware Update | Windows: Ver. 2.33 / Mac: Ver. 4.0.21 |
- *1: Please make sure that "Supports expressP2 Card B Series" is written on the bottom of the box.
If not, please contact your vendor for free exchange of the hardware.
