Specifying the network settings
Sets the wired LAN setting. (Wired LAN settings)
- Top
- Network Connection
- NDI|HX function
- Camera settings
Camera settings
Setting for the NDI|HX function
Set the [SYSTEM] menu → [FREQUENCY]/[REC FORMAT].
For details about the setting items, refer to “Settings when using the NDI|HX function”.
Select the [NETWORK] menu → [NETWORK FUNC] → [NDI|HX].
The NDI|HX function is selected. The camera will automatically restart.
Set the streaming format with the [NETWORK] menu → [NDI|HX] → [STREAMING FORMAT].
This cannot be used when set to UHD.
Streaming with multicast
One streaming can be distributed to multiple NDI|HX compatible switchers via supported router, etc., when the multicast function is used.
Select the [NETWORK] menu → [NDI|HX] → [MULTICAST] → [ENABLE].
Select the [NETWORK] menu → [NDI|HX], and specify [MULTICAST ADDRESS] and [MULTICAST PORT].
Set [MULTICAST ADDRESS] within following range.
IPv4: 224.0.1.0 to 239.255.255.254
IPv6: Multicast address starting with FF
Set [MULTICAST PORT] within the range of 1024 to 50000.
Using the NDI|HX function
Control the camera by operating the NDI|HX compatible switcher.