AW-RP150GJ Specifications

<GENERAL>
Power Requirements: 12 V DC (10.8 V to 13.2 V)
PoE+: IEEE802.3at standard: DC 42 V to 57 V (Camera Input)
Current Consumption: 1.0 A (Connector Input)
0.6 A (PoE+ power supply)
Ambient Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F)
Allowable Humidity: 20% to 90% (no condensation)
Storage Temperature: –20 °C to 50 °C (–4 °F to 122 °F)
Weight: Approx. 3.2 kg (7.05 lb)
Dimensions (W x H x D): 342 mm x 178 mm x 245 mm (13-15/32 inches x 7 inches x 9-21/32 inches)
(excluding protrusions)
Connection Supported Equipment: IP/RS422
AW-UE150W/K, AW-HR140*1, AW-HE130W/K*1, AW-HN130W/K*1, AW-UE70W/K*1, AW-UN70W/K*1, AW-HE40 Series*1, AW-HN40HW/HK*1, AW-HE38HW/HK*1, AW-HN38HW/HK*1
<Input/Output Connectors>
Input: DC 12 V IN
XLR 4‑pin
3G-SDI IN
SMPTE292 / 75 Ω (BNC x 1)
Supported formats:
1080/59.94p*2, 1080/50p*2, 1080/59.94i, 1080/50i, 1080/23.98p, 1080/25p, 1080/23.98PsF, 1080/25PsF
Output: ACTIVE THRU OUT
SMPTE292 / 75 Ω (BNC x 1)
Input/Output: IP CONT
100BASE‑TX
PoE+ input
Connection cable: LAN cable, max. 100 m (328 ft)
• When connecting the unit via a switching hub:
Straight cable or a cross cable (category 5 cable), STP (Shielded
Twisted Pair) cable recommended
• When connecting the unit directly: Crossover cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended
SERIAL CONT (RJ‑45):
RS‑422 (control signals for remote cameras), TALLY OUT
Connecting cable:
Straight cable (category 5e or better shielded cable), max. 1000 m (3280 ft)
TALLY OUT: Open collector output (negative logic)
Maximum voltage resistance DC 24 V, Maximum current 50 mA
TALLY/GPIO 1
D‑sub 25‑pin, female, inch thread
TALLY IN : 10 inputs (for receiving photocoupler signals)
GPI : 6 inputs (for receiving photocoupler signals)
GPIO : 5 inputs (for receiving photocoupler signals) or 5 outputs (open collector outputs, negative logic)
• Input/output switched with menu settings
GPIO 2
D‑sub 25‑pin, female, inch thread
GPI : 10 inputs (for receiving photocoupler signals)
GPIO : 10 inputs (for receiving photocoupler signals) or 10 outputs (open collector outputs, negative logic)
• Input/output switched with menu settings
Reserve connectors:
2 connectors (For future expansion feature)
LCD Display: 7-inch Touch Panel GUI Monitor (WVGA(800×480))
SD Memory Card Slot : SDHC / SDXC Memory Card Slot x 1
<Connection Specifications >
No. of Connectable Cameras: 200 (IP), 5 (RS422)
No. of Camera Selection Buttons: 10
No. of Camera Groups: 20 (10 units per 1 group)
<Memory>
Preset Memory: No. of memory presets 100
Tracing Memory:

No. of cameras Cam1 to Cam10
Recording time, no. of memory settings
Maximum 5 min. total per camera, maximum of 10 settings per camera

<Other Functions>
No. of User Assignable Buttons: 6 + up to 10 on the LCD menu
Pan / Tilt Speed Adjustment: 7 levels
Tally LED Display Color: green / red

*1: Connection with the AW-RP150GJ is planned for future support. Contact your sales representative for further information on when support will be available for this feature. Use may require a software version update.
*2: Level-A support only.

Return to Top