| General | ||
|---|---|---|
| Power Requirements | 12 V DC (10.8 V to 13.2 V), 42 V to 57 V DC (PoE power supply) | |
| Current Consumption | 0.9 A (XLR connector input), 0.3 A (PoE power supply) | |
| Ambient Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) | |
| Allowable Humidity Ranges | 20 % to 90 % (no condensation) | |
| Storage Temperature | -20 °C to 50 °C (-4 °F to 122 °F) | |
| Mass | 1.5 kg (3.31 lbs) | |
| Dimensions (W x H x D) | W 210 mm x H 92 mm x D 177 mm (8-9/32 inches x 3-5/8 inches x 6-31/32 inches) (excluding protrusions) |
|
| Input/Output Connectors | ||
| Input/Output | DC 12 V IN | XLR 4‑pin |
| LAN (RJ-45) (with LED) | 10BASE‑T/100BASE-TX, PoE input Connecting cable: LAN cable, max. 100 m (328 ft) • When connecting the unit via a switching hub: Straight cable (category 5e), STP (Shielded Twisted Pair) cable recommended • When connecting the unit directly: Crossover cable (category 5e), STP (Shielded Twisted Pair) cable recommended • REMOTE: Available only for LAN (RJ45) control |
|
| SERIAL CONT (RJ-45) | RS‑422 (control signals for remote cameras), TALLY OUT Connecting cable: Straight cable (category 5e), max. 1000 m (3280 ft) TALLY OUT: Open collector output (negative logic) Maximum voltage resistance DC 24 V, Maximum current 50 mA |
|
| TALLY/GPIO (D-sub 25-pin, female, inch thread) |
TALLY IN: Contact input (Status operation) GPIO IN: Contact input (Trigger operation) GPIO OUT: Open collector output (negative logic) Maximum voltage resistance DC 24 V, Maximum current 10 mA |
|
| LCD Display | 3.5 inch LCD (QHD: 960 x 540) | |
| Connection Specifications | No. of Connectable Cameras | 200 (IP), 5 (RS422) |
| Remote Camera Selection | 5 (6 to 200 controlled from the LCD) | |
| No. of Camera Groups | 40 (5 units/group) | |
| No. of Memory Presets | 100 | |
- * PoE is the abbreviation for Power over Ethernet.
