Tested Third Party Products
Control/Controlled Equipments
| Manufacturer | Product Type | Model Number (Version) |
Protocol Type | Note |
|---|---|---|---|---|
| BFE | GPIO Controller | KSC GPIO Controller GP-IO-32/Z1 LAN (ver. 1.0.3) |
GPIO via LAN | Supporting GPIO OUTPUT for Tally only |
| BlackMagicDesign | Playout | HyperDeck Studio (ver. 7.1.2) HyperDeck Studio 12G (ver. 7.1.2) |
Generic IP commands | Details (HyperDeck Studio) Details (HyperDeck Studio 12G) Thumbnail is not supported. |
| CHYRONHEGO | Play out Graphic | Click Effects PRIME (ver. 3.2.3.12) |
AMP | Details The following commands are supported: Device Management, Transport controls, Managing clips on the timeline, Managing Stored clips and Clip data information. Shuttle, Jog, TC display and so on are NOT supported. |
| Grass Valley | Video server | T2 4K (ver. 3.4.0.1791) |
AMP | Details The following commands are supported: Device Management, Transport controls, Managing clips on the timeline, Managing Stored clips and Clip data information. |
| Imagine Communications | Software Control System | Magellan SDN Orchestrator (Ver. 3.3.7) |
NMOS | Details |
| Panasonic | Camera (Tally) | AK-UC4000GJ + AK-NP600G |
TSL5.0 | IP Tally |
| PTZ | Panasonic AW | |||
| SimplyLive | Replay System | ViBox Slomo (ver. 06.2136.279) |
AMP | Details The following commands are supported: Device Management, Transport controls, Managing clips on the timeline, Managing Stored clips and Clip data information. The "End" button function in Kairos Creator is NOT supported. |
Peripherals
| Manufacturer | Product Type | Model Number (Version) |
Protocol Type | Note |
|---|---|---|---|---|
| AJA | IP Converter | IPT-10G2-HDMI IPT-10G2-SDI IPR-10G2-HDMI IPR-10G2-SDI |
— | |
| ARISTA | Network Switch | DCS-7050CX3-32S-F DCS-7050SX3-48YC8-F DCS-7280SR3K-48YC8-F (ver. 4.26.4M) |
— | Details |
| CISCO | Network Switch | N9K-C9236C N9K-C93240YC-FX2 N9K-C9364C-GX N9K-C93180YC-FX3 |
— | |
| DELTACAST | Capture | FLEX module | — | • Input / Capture: FLEX-12G 10 : 4-input 3G or single-input 12G SDI module FLEX-3G 40 : 4-input 3G-SDI module FLEX-DP 10 : Single-input DisplayPort 1.2 module FLEX-HMI 10 : Single-input HDMI 2.0 module • Output / Playout: FLEX-12G 01 : 4-output 3G or single-output 12G SDI module FLEX-3G 04 : 4-output 3G-SDI module FLEX-DP 01 : Single-output DisplayPort 1.2 module FLEX-HMI 01 : Single-output HDMI 2.0 module |
| Grass Valley | IP Converter | IPVU IPVU-UHD |
Details | |
| H3C | Network Switch | S6550XE-56HF-HI | ||
| Imagine Communications | IP Gateway | Selenio Network Processor(SNP) (ver. 2.0) |
||
| LAWO | VSM Control Panel | vsmLBP 17-SNAP vsmLBP34-SNAP vsmLBP51-SNAP vsmLBP 32-DT-SNAP |
— | |
| LEADER | PTP | LT4610 | — | LT4610SER03(PTP) Option is required. |
| LiveU | Live video uplink solution | LU2000-SMPTE2110 (ver.9.0) | — | Details ST 2110 connection : video/audio output to Kairos LiveU IP Pipe : AW-UE150 Panasonic PTZ camera control from Kairos Control Panel or Kairos Creator while live streaming LiveU field unit: LU600 (ver.8.6) |
| Mellanox | Network Switch | SN2410 | — | |
| RIEDEL | IP Gateway | MuoN A series | — |
3G-Encap/INPUT (2ch 3G-SDI)
3G-Decap/OUTPUT (2ch 3G-SDI)
3G-Decap/OUTPUT (1ch HDMI)
Network switch used for the test: RIEDEL MN-VirtU 48-S Mellanox SN2410*
|
| IP Gateway | Muon B series | — |
12G-Encap/INPUT (2ch 12G-SDI) Up to 8Ch
12G-Decap/OUTPUT(2ch 12G-SDI) Up to 4Ch
Core Processing Frame for Muon B: RIEDEL (FRAME) MN-VirtU 32 (100G AOC) MN-Z-AOC-QSFP-RT-100 Network switches used for the test: Mellanox SN2410**
|
|
| Core Processing Frame | MN-VirtU 32 | |||
| Network Switch | MN-VirtU 48-S | — | ||
| MediorNet | MicronN MV MicronN IP |
— | Details | |
| Telestream | PTP GM | SPG8000A | — |
