[NETWORK SETUP]

[NETWORK SETUP] cannot be selected right after the power is turned on, because boot of the camera is in progress.

This is not an error. Perform operation after a while.

[NETWORK SETUP(1/2)]

Item

Description of settings

[IP ADDRESS]

Sets the IP address.

  • Factory setting: [192.168.0.30]

[SUBNET MASK]

Sets the subnet mask.

  • Factory setting: [255.255.255.0]

[DEFAULT GATEWAY]

Sets the default gateway.

  • Factory setting: [192.168.0.1]

[ROP PORT]

Sets the port number when connecting to ROP.

[49152], [49200]…[49299]

  • Factory setting: [49152]

[WEB CONNECTION]

Sets the method to connect to the unit.

[HTTP], [HTTPS]

  • Factory setting: [HTTP]

[SET EXECUTE]

Select whether to have the unit operate according to the settings made in [NETWORK SETUP(1/2)].

[NO], [YES]

[MAC ADDRESS]

Displays the MAC address. (This cannot be changed.)

[NETWORK SETUP(2/2)]

Item

Description of settings

[IP TALLY]

[INDEX NO]

Sets the INDEX NO set by devices that output TALLY.

[1]…[65534]

  • Factory setting: [1]

[PORT]

Sets the PORT number for TALLY IN.

[60000]…[65535]

  • Factory setting: [60000]

[SET EXECUTE]

Select whether to have the unit operate according to the settings made in [NETWORK SETUP(2/2)].

[NO], [YES]

NOTE

  • If you close the menu without selecting [YES], the modified content returns to the original settings.

[NTP SETTING]

Item

Description of settings

[NTP SERVER ADDRESS]

Input the IP address of the NTP server.

[NTP PORT]

Input the port No. of the NTP server.

[1]…[65535]

  • Factory setting: [123]

NOTE

  • You cannot use a port number that is being used by other functions such as [NETWORK SETUP].

[TIME ADJUSTMENT INTERVAL]

Selects the interval (1 to 24 hours in 1-hour increments) for acquiring the time from the NTP server.

[1h]…[24h]

  • Factory setting: [1h]

[SET EXECUTE]

Select whether to have the unit operate according to the settings made in [NTP SETTING].

[NO], [YES]