Menu list

[MARKER]

Item		Setting content
[EXIT]		Returns to the upper level.
[MARKER]	—	Sets if the marker is displayed in the screen or not. [ON], [OFF] Factory setting: [OFF] [BOX MARKER] is set to [OFF] when [BOX MARKER] is [ON1]/[ON2] and [MARKER] is set to [ON].
	[ZONE]	Selects the type of marker. [OFF]: Marker is not displayed. [4:3]: Marker of 4:3 size. [13:9]: Marker of 13:9 size. [14:9]: Marker of 14:9 size. [CNSCO2.39]: Marker of 2.39:1 size. [CNSCO2.35]: Marker of 2.35:1 size. [2:1]: Marker of 2:1 size. [VISTA]: Marker of 1.85:1 size. [95%]: Marker of 95% area. [93%]: Marker of 93% area. [90%]: Marker of 90% area. [88%]: Marker of 88% area. [80%]: Marker of 80% area. [USER85%]: Variable area marker between the range of 80% to 100% (in 1% steps) (can be set by pressing the <SELECT> dial button and the setting value changes to light blue) (factory setting is [85%]) Factory setting: [4:3]
	[4:3]	Selects the type of marker displayed when the image aspect ratio is 4:3. [OFF]: Marker is not displayed. [95%]: Marker of 95% area. [93%]: Marker of 93% area. [90%]: Marker of 90% area. [88%]: Marker of 88% area. [80%]: Marker of 80% area. [USER85%]: Variable area marker between the range of 80% to 100% (in 1% steps) (can be set by pressing the <SELECT> dial button and the setting value changes to light blue) (factory setting is [85%]) Factory setting: [OFF]
	[BACK]	Sets the background brightness outside the marker set with [ZONE]. [NORMAL]: Normal background. [HALF]: Background brightness is set to 50%. [BLACK]: Background brightness is set to 0% (black). Factory setting: [NORMAL]
	[CENTER]	Sets if the center marker is displayed or not. [ON], [OFF] Factory setting: [OFF]
[CROSS HATCH]	—	Sets the display and density of the cross hatch. [OFF]: Does not display. [LOW]: Dim cross hatch is displayed. [HIGH]: Bright cross hatch is displayed. Factory setting: [OFF]
	[SIZE]	Selects the cross hatch size. [80]: 80 dots and 80 lines [40]: 40 dots and 40 lines Factory setting: [80]
[BOX MARKER]	—	Sets if the box marker is displayed in the screen or not. Two patterns of [ON1] and [ON2] can be recorded. [ON1], [ON2], [OFF] Factory setting: [OFF] [MARKER] is set to [OFF] when [MARKER] is [ON] and [BOX MARKER] is set to [ON1]/[ON2].
	[TYPE]	Sets the display type of the box marker. [BOX]: Box type display. [CROSS]: Cross type display. Factory setting: [BOX]
	[H POS]	Sets the horizontal position to display the box marker. [10]...[1270] (in 10 dots step) Factory setting: [640]
	[V POS]	Sets the vertical position to display the box marker. [10]...[710] (in 10 lines step) Factory setting: [360]
	[H SIZE]	Sets the horizontal size of the box marker. [10]...[1270] (in 10 dots step) Factory setting: [460]
	[V SIZE]	Sets the vertical size of the box marker. [10]...[710] (in 10 lines step) Factory setting: [460]

[FUNCTION]

Item		Setting content
[EXIT]		Returns to the upper level.
[FUNCTION1]		Selects the function assigned to the <F1> button. [SCAN]: Switches between the underscan and normal display. [WFM]: Displays the waveform display screen. [MARKER]: Displays the marker. [PIXEL TO PIXEL]: Switches the enable/disable of the PIXEL TO PIXEL function ¹². [FOCUS-IN-RED]: Switches the enable/disable of the function to enhance the focused part of the image (disabled when [WFM] is displayed, disabled when there is no input signal, setting is cleared when the power is turned off, and the detection sensitivity can be changed with the <SELECT> dial button during the operation when [FOCUS-IN-RED] is assigned with [MAIN MENU] → [FUNCTION] → [ASSIGN]). [CROSS HATCH]: Switches the cross hatch display. [MONO]: Switches between the color and monochrome display. [UP TALLY]: Switches the on/off of the up tally lamp. [FRONT TALLY]: Switches the brightness of the front tally lamp. [CAM MENU]: Switches the enable/disable of the camera menu operation function (setting is canceled when the power is turned off). [FOCUS ASSIST]: Switches the enable/disable of the focus assist function on the camera. [ZOOM LINK]: Switches the enable/disable of the detail function on the viewfinder linked with the zoom. [UNDEF]: Function is not assigned. Factory setting: [MONO] [CAM MENU], [FOCUS ASSIST], and [ZOOM LINK] can be operated only when the camera (AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected.
[FUNCTION2]		Selects the function assigned to the <F2> button. [SCAN]: Switches between the underscan and normal display. [WFM]: Displays the waveform display screen. [MARKER]: Displays the marker. [PIXEL TO PIXEL]: Switches the enable/disable of the PIXEL TO PIXEL function ¹². [FOCUS-IN-RED]: Switches the enable/disable of the function to enhance the focused part of the image (disabled when [WFM] is displayed, disabled when there is no input signal, setting is cleared when the power is turned off, and the detection sensitivity can be changed with the <SELECT> dial button during the operation when [FOCUS-IN-RED] is assigned with [MAIN MENU] → [FUNCTION] → [ASSIGN]). [CROSS HATCH]: Switches the cross hatch display. [MONO]: Switches between the color and monochrome display. [UP TALLY]: Switches the on/off of the up tally lamp. [FRONT TALLY]: Switches the brightness of the front tally lamp. [CAM MENU]: Switches the enable/disable of the camera menu operation function (setting is canceled when the power is turned off). [FOCUS ASSIST]: Switches the enable/disable of the focus assist function on the camera. [ZOOM LINK]: Switches the enable/disable of the detail function on the viewfinder linked with the zoom. [UNDEF]: Function is not assigned. Factory setting: [PIXEL TO PIXEL] [CAM MENU], [FOCUS ASSIST], and [ZOOM LINK] can be operated only when the camera (AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected.
[FUNCTION3]		Selects the function assigned to the <F3> button. [SCAN]: Switches between the underscan and normal display. [WFM]: Displays the waveform display screen. [MARKER]: Displays the marker. [PIXEL TO PIXEL]: Switches the enable/disable of the PIXEL TO PIXEL function ¹². [FOCUS-IN-RED]: Switches the enable/disable of the function to enhance the focused part of the image (disabled when [WFM] is displayed, disabled when there is no input signal, setting is cleared when the power is turned off, and the detection sensitivity can be changed with the <SELECT> dial button during the operation when [FOCUS-IN-RED] is assigned with [MAIN MENU] → [FUNCTION] → [ASSIGN]). [CROSS HATCH]: Switches the cross hatch display. [MONO]: Switches between the color and monochrome display. [UP TALLY]: Switches the on/off of the up tally lamp. [FRONT TALLY]: Switches the brightness of the front tally lamp. [CAM MENU]: Switches the enable/disable of the camera menu operation function (setting is canceled when the power is turned off). [FOCUS ASSIST]: Switches the enable/disable of the focus assist function on the camera. [ZOOM LINK]: Switches the enable/disable of the detail function on the viewfinder linked with the zoom. [UNDEF]: Function is not assigned. Factory setting: [FOCUS-IN-RED] [CAM MENU], [FOCUS ASSIST], and [ZOOM LINK] can be operated only when the camera (AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected.
[ASSIGN]		Selects the function assigned to the <SELECT> dial button when the menu is not displayed. [FOCUS-IN-RED]: Changes the detection sensitivity of the function to enhance the part that is focused in the image. [IN-RED-COLOR]: Switches the display color of the function to enhance the part that is focused in the image. [VF DTL]: Adjusts the detail level of the viewfinder. [MARKER BACK]: Switches the background brightness of outside for the marker set in [MAIN MENU] → [MARKER] → [ZONE]. [BOX MARKER VF]: Switches the enable/disable of the box marker display on this unit. [BOX MARKER CAM]: Switches the enable/disable of the box marker display on the camera. [ZOOM LINK LEVEL]: Switches the detail level of the viewfinder linked with the zoom. [UNDEF]: Function is not assigned. Factory setting: [UNDEF] [VF DTL], [BOX MARKER CAM], and [ZOOM LINK LEVEL] can be operated only when the camera (AK-UC4000G/AK-UC4000GS, AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected.
[FUNCTION DISPLAY]		Selects the display setting and the operation setting (one touch, two touches) for the function assigned to the <F1> to <F3> buttons. [OFF]: Does not display the function. [ON1]: Displays the function simultaneously as setting the operation. (One touch) [ON2]: The function is displayed first, and then the operation is set by pressing the <F1> to <F3> buttons. (Two touches) Factory setting: [ON1]

The setting is cleared when the power is turned off.

Center part of the screen is displayed in enlarged display. A [P-P] mark is displayed at the top left of the screen while in operation.

[VIDEO CONFIG]

Item		Setting content
[EXIT]		Returns to the upper level.
[GAMMA SELECT]	—	Selects the gamma curve.* [STANDARD]: Standard mode. [FILM]: Film mode (displays [FILM] at the top left of the screen). Factory setting: [STANDARD]
	[FILM GAMMA]	Selects the type of the film gamma mode in accordance with the gamma setting on the camera.* [FILM REC]: When [FILM REC] is selected. [OTHER]: When anything other than [FILM REC] is selected. Conceptual diagram of gamma curve [OTHER] Brightness [FILM REC] [STANDARD] Input level Factory setting: [FILM REC]
[COLOR TEMP.]		Selects the color temperature. [USER 0]...[USER 63]: Variable settings 0 to 63 (equivalent to color temperature of 3000 K to 9300 K) (can be set when the <SELECT> dial button is pressed and the setting value changes to light blue). [D93]: Equivalent to color temperature of 9300 K [D65]: Equivalent to color temperature of 6500 K [D56]: Equivalent to color temperature of 5600 K Factory setting: [D65]
[SHARPNESS MODE]		Selects the edge width of the contour correction (during peaking). [HIGH]: Narrow edge [LOW]: Wide edge Factory setting: [HIGH]
[SHARPNESS H]		Sets the horizontal contour correction. Adds to the operation of the <PEAKING> knob. [0]…[30] Factory setting: [0]
[SHARPNESS V]		Sets the vertical contour correction. Adds to the operation of the <PEAKING> knob. [0]…[30] Factory setting: [0]
[MONO]		Switches between color and monochrome. [OFF]: Color. [ON]: Monochrome. Factory setting: [OFF]
[SCAN]		Sets the underscan or normal display of the screen. [NORMAL]: Normal display. [UNDER]: Underscan. Factory setting: [NORMAL]

Correct image is not displayed when the gamma setting is different from the setting of the camera.

[SYSTEM CONFIG]

Item	Setting content
[EXIT]	Returns to the upper level.
[WFM]	Sets if the waveform of the video signal input to viewfinder is displayed or not. [FOCUS-IN-RED] is disabled when [WFM] is displayed while [FOCUS-IN-RED] is enabled. [OFF]: Not displayed. [ON]: Displays the waveform of the brightness signal. Factory setting: [OFF]
[WFM POSITION]	Selects the position of the waveform display when [WFM] is [ON]. [LB]: Bottom left of the screen. [RB]: Bottom right of the screen. [RT]: Top right of the screen. [LT]: Top left of the screen. Factory setting: [RB]
[TALLY ASSIGN]	Sets the illumination condition of the assignable tally lamp. [OFF]: Turns off. [CAM MENU]: Turns on when the menu operation function of the camera is enabled. This is enabled only when the camera (AK-UC4000G/AK-UC4000GS, AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected. [!LED]: Turns on when it matches the setting on the camera. This is enabled only when the camera (AK-UC4000G/AK-UC4000GS) is connected. Factory setting: [OFF]
[MENU RESUME]	Sets the enable/disable of the menu resume function. [OFF], [ON] Factory setting: [OFF]
[POWER LED]	Sets the illumination condition of the <POWER> lamp. [ON]: Turns on continuously. [OFF1]: Turns off (setting will return to [ON] when the power is turned off/on). [OFF2]: Turns off continuously. Factory setting: [ON]
[POWER RESUME]	Sets whether to remember the status when the unit is turned off with the <POWER> button. [ON]: Remember the status. [OFF]: Does not remember the status. The unit turns on when power is supplied from the camera. Factory setting: [ON]
[STATUS DISPLAY]	Sets the display condition of the status display. [CONTINUE]: Displays continuously. [3SEC OFF]: Displays for three seconds after changing the condition of the status display, and then disappears. [OFF]: Not displayed. Factory setting: [3SEC OFF]

[HOURS METER]

Item

Setting content

[EXIT]

Returns to the upper level.

[OPERATION]

Displays the total number of hours the power was turned on.

Hours up to 262800 hours [262800H] (approximately 30 years) is displayed. Hours exceeding 262800 hours is displayed as [OVER].

[LCD]

Displays the number of hours the backlight has been on.

Hours up to 262800 hours [262800H] (approximately 30 years) is displayed. Hours exceeding 262800 hours is displayed as [OVER].

[TALLY BRIGHT]

Item

Setting content

[EXIT]

Returns to the upper level.

[UP TALLY]

Sets the brightness of the up tally lamp.

[HIGH]: Turns on (bright).

[LOW]: Turns on (dark).

[OFF]: Turns off.

Factory setting: [LOW]

[FRONT TALLY]

Sets the brightness of the front tally lamp.

[HIGH]: Turns on (bright).

[MID]: Turns on (medium).

[LOW]: Turns on (dark).

Factory setting: [MID]

[FOCUS ASSIST]

Item		Setting content
[EXIT]		Returns to the upper level.
[FOCUS-IN-RED]	—	Sets the enable/disable of the function to enhance the part that is focused in the image on this unit. Disabled while [WFM] is displayed. Disabled when there is no input signal. (setting is canceled when the power is turned off) [OFF], [ON] Factory setting: [OFF]
[FOCUS-IN-RED]	[IN-RED-COLOR]	Sets the display color of the function to enhance the part that is focused in the image on this unit. [RED], [GREEN], [BLUE], [WHITE] Factory setting: [RED]
[ZOOM LINK]	—	Sets the enable/disable of the detail function on the viewfinder linked with the zoom. [OFF], [ON] Factory setting: [OFF] This item can be operated only when the camera (AK-UC4000G/AK-UC4000GS, AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected.
[ZOOM LINK]	[LINK LEVEL]	Sets the detail level of the viewfinder linked with the zoom. [LOW], [MID], [HIGH] Factory setting: [LOW]
[FOCUS ASSIST]		Sets the enable/disable of the focus assist function on the camera. [OFF], [ON] Factory setting: [OFF] This item can be operated only when the camera (AK-UC4000G/AK-UC4000GS, AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected.

Top of the page