Accessories

IP/12G/3G Interface Kit

  • AK-NP600G

  • * SFP+ Transceiver needs to be purchased separately.
    operation-verified SFP Module
    Finisar Corporation
    SFP+ Transceiver/FTLX1475D3BTL.

Optional IP Kit for Installation on the Rear Terminal of the AK-UCU600

  • SMPTE ST 2110 standard compliant
  • Supported Formats
    1080/59.94p, 50p, 59.94i, 50i, 720/59.94p, 50p
  • The Following Input/Output is Supported
    CAMERA Output, RET Input, HD TRUNK Output, HD PROMPTER IN, AUDIO Output, INTERCOM, PGM Input, ST 2059 (PTP), TALLY
  • * 12G two outputs, 3Gx4 one output or TICO one output in UHD mode. HD (3G/1.5G) four outputs and SFP+ (ST 2110) two outputs are supported in HD mode.
  • * AK-NP600G (IP/12G/3G Interface Kit) does not support analog VBS input/output signals (OUT/PM OUT/RET IN).
  • * AK-UC4000 (4K Studio Camera) and AK-UCU600 (Camera Control Unit) firmware upgrades are required to install AK-NP600G (IP/12G/3G Interface Kit). See Service and Support/Pass.
  • * Consult with your Panasonic dealer about AK-NP600G (IP/12G/3G Interface Kit) installation.

As part of a program run by the Joint Taskforce on Networked Media (JT-NM), Panasonic's IP/12G/3G Interface Kit AK-NP600G has received JT-NM tested badge for the international media transmission standard SMPTE ST 2110 and the control/management standards AMWA NMOS IS-04,05, both of which are shown in the EBU Pyramid’s technological requirements.

Rear View

Specifications

Dimensions (W x H x D) Approx. 175.5 mm x 28.8 mm x 138.5 mm (6-29/32 inches x 1-1/8 inches x 5-7/16 inches)
Weight Approx. 284 g (0.63 lbs) (including radiator fins)
Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Humidity 10% to 90% (no condensation)
Input/Output Section <UHD/HS/HD SDI OUT1>
terminal
BNC x 1, 12G / 6G / 3G /1.5G HD SDI : 0.8 V [p-p], 75 Ω
<UHD/HS/HD SDI OUT2>
terminal
BNC x 1, 12G / 6G / 3G /1.5G HD SDI: 0.8 V [p-p], 75 Ω
<UHD/HS/HD SDI OUT3>
terminal
BNC x 1, 3G / 1.5G HD SDI: 0.8 V [p-p], 75 Ω
<UHD/HS/HD SDI OUT4>
terminal
BNC x 1, 3G / 1.5G HD SDI: 0.8 V [p-p], 75 Ω
<HD TRUNK/TICO OUT>
terminal
BNC x 1, 1.5G HD SDI when HD TRUNK,
3G / 1.5G HD SDI when TICO : 0.8 V [p-p], 75 Ω
<HD SDI/PROMPT IN>
terminal
BNC x 1, 1.5G HD SDI: 0.8 V [p-p], 75 Ω
<SFP+1> slot SFP+ x 1, 10GBASE-LR
<SFP+2> slot SFP+ x 1, 10GBASE-LR
<LAN2> terminal RJ-45 x 1
Bundled Items Pillar (M3 x H20) x 1, Options rear panel x 1,
Power cable x 1, Heat-transfer sheet x 1, Gaskets x 2