Mainframe AV-HS73U2
| General | ||
|---|---|---|
| Power Supply | AC 100 V to 240 V, 50 Hz/60 Hz | |
| Power Consumption | 460 W | |
| Ambient Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) | |
| Ambient Operating Humidity | 10 % to 90 % (no condensation) | |
| Dimensions (W x H x D) | 482 mm x 399 mm x 420 mm (excluding protrusions), 9RU | |
| Weight | Approx. 37 kg (when full option is installed, excluding accessories) | |
| Video Terminal | ||
| SDI IN 1 to SDI IN 72 Terminals | During Standard mode Standard 36 lines • Connector: BNC x 36 Maximum 72 lines • Connector: BNC x 72 |
|
| HD-SDI | HD serial digital, SMPTE292M (BTA S-004) standard compliant • 0.8 V [p-p] ± 10 % (75 Ω) • Automatic equalizer 100 m (when 1.5 Gbps/5C-FB cable is used) |
|
| 3G-SDI | 3G serial digital, SMPTE424M standard compliant • 0.8 V [p-p] ± 10 % (75 Ω) • Automatic equalizer 100 m (when 3 Gbps/5C-FB cable is used) • 3G‑SDI Level A, 3G‑SDI Level B |
|
| During 4K mode Standard 9 lines • Connector: BNC x 36 (construct one line of 4K signal with four terminals) Maximum 18 lines • Connector: BNC x 72 (construct one line of 4K signal with four terminals) • Can use the 4K signal in SQD format |
||
| SDI OUT 1 to SDI OUT 42 Terminals | During Standard mode Standard 14 lines (<SDI OUT 1> to <SDI OUT 4>: Two distribute output, <SDI OUT 5> to <SDI OUT 14>: One distribute output) • Connector: BNC x 18 Maximum 42 lines (<SDI OUT 1> to <SDI OUT 4>, <SDI OUT 15> to <SDI OUT 18>, <SDI OUT 29> to <SDI OUT 32>: Two distribute output, other: One distribute output) • Connector: BNC x 54 • ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, ME2KEYPVW, ME3PGM, ME3PVW, ME3CLN, ME3KEYPVW, ME4PGM, ME4PVW, ME4CLN, ME4KEYPVW, DSKPGM1, DSKPGM2, DSKPVW1, DSKPVW2, DSK1CLN, DSK2CLN, DSK3CLN, DSK4CLN, SEL KEYPVW, MV1 to MV4, AUX1 to AUX24 can be assigned |
|
| HD-SDI | HD serial digital, SMPTE292M (BTA S-004) standard compliant • Output level: 0.8 V [p-p] ± 10 % • Rise time: Less than 270 ps (HD) • Fall time: Less than 270 ps (HD) • Difference between rise time and fall time: 100 ps or less (HD) • Alignment jitter: 0.2 UI (130 ps) or less (HD) • Timing jitter: 1.0 UI or less (HD) • Eye aperture ratio: 90 % or more • DC offset: 0 ± 0.5 V |
|
| 3G-SDI | 3G serial digital, SMPTE424M standard compliant • Output level: 0.8 V [p-p] ± 10 % • Rise time: 135 ps or less • Fall time: 135 ps or less • Difference between rise time and fall time: 50 ps or less • Alignment jitter: 0.3 UI or less • Timing jitter: 2.0 UI or less • DC offset: 0 ± 0.5 V • 3G‑SDI Level B |
|
| During 4K mode Standard 3 lines (construct one line of 4K signal with four terminals) • <SDI OUT 1> to <SDI OUT 4>: One line x two distribute output, • <SDI OUT 1> to <SDI OUT 4>: One line x two distribute output, • <SDI OUT 15> to <SDI OUT 18>: One line x two distribute output, • <SDI OUT 29> to <SDI OUT 32>: One line x two distribute output, • ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, ME2KEYPVW, DSKPGM1, DSKPGM2, DSKPVW1, DSKPVW2, DSK1CLN, DSK2CLN, SEL KEYPVW, MV1, and AUX1 to AUX6 can be assigned |
||
| Signal Formats | 1080/59.94p, 1080/59.94i, 1080/50p, 1080/50i, 1080/29.97PsF, 1080/25PsF, 1080/23.98PsF, 2160/59.94p, 2160/50p | |
| Signal Processing | Y:PB:PR | 4:2:2 10 bit |
| R:G:B | 4:4:4 8 bit | |
| ME Number | 4ME (Standard Mode) / 1.5ME (4K Mode) | |
| Synchronous Terminal | ||
| REF Terminal | In Genlock mode: Black burst or Tri-level Sync input signals (with loop-through) • If the loop-through output is not used, provide a 75 Ω termination. • Connector: BNC • Same field frequencies as those of the system formats supported • Only the Genlock mode is supported for 1080/23.98PsF format • In the 1080/23.98PsF format, black burst signals with 10 Field ID (SMPTE318M standard compliant) or Tri-level Sync signals supported |
|
| Video Delay Time | During Standard mode | |
| 1 line (H) | When the frame synchronizer is set to [Off] | |
| 2 field (V) | When the frame synchronizer is set to [On] | |
| • Maximum delay of 1 frame is added when passing through PinP, DVE, MultiView, or DVI-IN. | ||
| Control Terminal | ||
| LAN Terminal | Compatible with 100BASE‑TX and AUTO-MDIX (For IP control) • Connection cable: LAN cable (CAT5e), max. 100 m, STP (Shielded Twisted Pair) cable recommended • Connector: RJ-45 |
|
| PANEL Terminal | Compatible with 100BASE‑TX and AUTO-MDIX (For Control Panel AV‑HS60C2/AV‑HS60C4 connection) • Connection cable (supplied with AV‑HS60C2/AV‑HS60C4): LAN cable (CAT5e), straight cable, STP (Shielded Twisted Pair), 10 m • Connector: RJ-45 |
|
| COM1 (M) / COM2(M) / COM3 (M) Terminals |
RS-422 control terminal For master connection for controlling external devices • Connector: D-sub 9-pin (female) x 3, inch screw |
|
| COM4 (M/S) Terminal | RS-422 control terminal For master/slave connection for controlling external devices • Connector: D-sub 9-pin (female), inch screw • Switchable between master connection and slave connection by the menu |
|
| GPI IN Terminal | GPI IN: 18 inputs, general-purpose, photocoupler sensing ALARM OUT: 1 output, open collector output (negative logic) • Connector: D-sub 25-pin (female), inch screw |
|
| GPI OUT1 / GPI OUT2 terminal | GPI OUT: 48 outputs, selected from general purpose, tally Open collector output • Connector: D-sub 25-pin (female) x 2, inch screw |
|
Control Panel AV-HS60C2P/E
| General | ||
|---|---|---|
| Power Supply | AC 100 V to 240 V, 50 Hz/60 Hz (AV-HS60C2 supports redundant power supply) |
|
| Power Consumption | 40 W | |
| Ambient Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) | |
| Ambient Operating Humidity | 10 % to 90 % (no condensation) | |
| Storage Temperature | 0 °C to 40 °C (32 °F to 104 °F) | |
| Storage Humidity | 10 % to 90 % (no condensation) | |
| Weight | Approx. 13.9 kg (30.6 lbs.) (excluding accessories) | |
| Dimensions (W x H x D) | 980 mm x 153.4 mm x 267 mm (38-19/32 inches x 6-1/32 inches x 10-1/2 inches) (excluding protrusions) |
|
| Control Terminal | ||
| Mainframe Terminal | Compatible with 100Base-TX and AUTO-MDIX (For Mainframe AV-HS60U2 connection) Connection cable (supplied with AV-HS60C2): LAN cable (CAT5e), Straight cable, STP (Shielded Twisted Pair), 10 m (32.8 ft) • Connector: RJ-45 When connected to the <LAN> terminal, no video will be displayed on the Menu Panel AV-HS60C3G. |
|
| MENU PANEL Terminal | Used only for the Menu Panel AV-HS60C3G • Connector: DVI-D • Cannot be connected to DVI-D monitor. • Cannot be used concurrently with a DVI-D monitor connected to the <DVI-D> terminal. Select with the display selector switch. |
|
| DVI-D Terminal | Used for displaying menus to the DVI monitor • Connector: DVI-D • Monitor resolution: 1366 x 768 compatible monitor • Cannot be used concurrently with the <MENU PANEL> terminal. Select with the display selector switch. |
|
| USB Terminal | For DVI monitor menu operation • Connector: USB (type A, female) • Cannot be used for the Menu Panel AV-HS60C3G. |
|
| Display Selector Switch | Switch for selecting <MENU PANEL> terminal or <DVI-D> terminal | |
| COM1 (M) Terminal | RS-422 Control Terminal For master connection for controlling external devices • Connector: D-sub 9-pin (female), inch screw |
|
| COM2 (RS-232) Terminal | RS-232 Control Terminal For external device control connections • Connector: D-sub 9-pin (male), inch screw |
|
| GPI I/O Terminal | GPI IN: 8 inputs, general-purpose, photocoupler sensing ALARM OUT: 1 output, open collector output (negative logic) GPI OUT: 10 outputs, selected from general purpose, tally Open collector output • Connector: D-sub 25-pin (female), inch screw |
|
| ME Number | 2 ME | |
