[AUDIO SETTINGS] menu
Sets the input/output function of audio.
[AUDIO CH SETTINGS]
[CH1 IN SELECT]
Sets the audio to be recorded in the audio channel 1.
[INT(L)] |
Records the audio from the built-in microphone <L>. |
[INPUT1] |
Records the input signal from the <AUDIO INPUT 1> terminal. |
(Factory setting: [INT(L)])
[CH2 IN SELECT]
Sets the audio to be recorded in the audio channel 2.
[INT(R)] |
Records the audio from the built-in microphone <R>. |
[INPUT1] |
Records the input signal from the <AUDIO INPUT 1> terminal. |
[INPUT2] |
Records the input signal from the <AUDIO INPUT 2> terminal. |
(Factory setting: [INT(R)])
[CH1 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 1.
The items that can be set are as follows.
(Factory setting: [OFF])
[CH2 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 2.
The items that can be set are as follows.
(Factory setting: [OFF])
[CH1 LIMITER]
Enables/disables the limiter when the method to adjust the audio input level for audio channel 1 is manual.
The items that can be set are as follows.
(Factory setting: [OFF])
[CH2 LIMITER]
Enables/disables the limiter when the method to adjust the audio input level for audio channel 2 is manual.
The items that can be set are as follows.
(Factory setting: [OFF])
[HEAD ROOM]
Sets the headroom (standard level).
The items that can be set are as follows.
(Factory setting: [18dB])
[AUDIO INPUT]
[INPUT1 LINE/MIC SEL]
Sets the audio input signal from the device connected to the <AUDIO INPUT 1> terminal.
[LINE] |
Sets this when an audio device is connected. |
[MIC] |
Sets this when an external microphone is connected. |
(Factory setting: [LINE])
[INPUT2 LINE/MIC SEL]
Sets the audio input signal from the device connected to the <AUDIO INPUT 2> terminal.
[LINE] |
Sets this when an audio device is connected. |
[MIC] |
Sets this when an external microphone is connected. |
(Factory setting: [LINE])
[INPUT1 MIC POWER]
Enables/disables the phantom power supply for the external microphone connected to the <AUDIO INPUT 1> terminal.
The items that can be set are as follows.
(Factory setting: [OFF])
[INPUT2 MIC POWER]
Enables/disables the phantom power supply for the external microphone connected to the <AUDIO INPUT 2> terminal.
The items that can be set are as follows.
(Factory setting: [OFF])
[INPUT1 MIC LEVEL]
Sets the input level of the external microphone connected to the <AUDIO INPUT 1> terminal. Enabled when the external microphone is connected and [INPUT1 LINE/MIC SEL] of [AUDIO INPUT] is set to [MIC].
The items that can be set are as follows.
(Factory setting: [-60dB])
[INPUT2 MIC LEVEL]
Sets the input level of the external microphone connected to the <AUDIO INPUT 2> terminal. Enabled when the external microphone is connected and [INPUT2 LINE/MIC SEL] of [AUDIO INPUT] is set to [MIC].
The items that can be set are as follows.
(Factory setting: [-60dB])
[INPUT1 LINE LEVEL]
Sets the audio input level of the audio device connected to the <AUDIO INPUT 1> terminal. Enabled when the audio device is connected and [INPUT1 LINE/MIC SEL] of [AUDIO INPUT] is set to [LINE].
The items that can be set are as follows.
(Factory setting: [4dB])
[INPUT2 LINE LEVEL]
Sets the audio input level of the audio device connected to the <AUDIO INPUT 2> terminal. Enabled when the audio device is connected and [INPUT2 LINE/MIC SEL] of [AUDIO INPUT] is set to [LINE].
The items that can be set are as follows.
(Factory setting: [4dB])
[AUDIO OUTPUT]
[MONITOR OUT]
Sets the audio channel and the format to be output from the headphone terminal.
[CH1] |
Outputs the signal for audio channel 1 as monaural. |
[CH2] |
Outputs the signal for audio channel 2 as monaural. |
[STEREO] |
Outputs the signals of the audio channel 1 and the audio channel 2 as stereo. |
[MIX] |
Mixes the signals of the audio channel 1 and the audio channel 2 and outputs as monaural. |
(Factory setting: [STEREO])
[MONITOR DELAY]
Sets if the audio from the headphone terminal is to be delayed to match the video on the LCD monitor.
[LIVE] |
Outputs without delay. |
[RECORDING] |
Matches to the video on the LCD monitor. |
(Factory setting: [LIVE])
[MONITOR VOL]
Adjusts the level of audio output from the headphone terminal.
The items that can be set are as follows.
(Factory setting: [70])
[REC BEEP SOUND]
[MODE]
Sets if the beep sound is generated when starting or stopping the recording.
[OFF] |
The beep sound is not generated. |
[START] |
The beep sound is generated only when the recording is started. |
[STOP] |
The beep sound is generated only when the recording is stopped. |
[START&STOP] |
The beep sound is generated when the recording is started and stopped. |
(Factory setting: [OFF])
[VOLUME]
Sets the volume of the beep sound when starting or stopping the recording.
The items that can be set are as follows.
(Factory setting: [MED])
[ALARM]
[BATTERY END]
Sets if the alarm is to be sounded when the remaining battery level is exhausted.
The items that can be set are as follows.
(Factory setting: [MED])
[MEDIA END]
Sets if the alarm is sounded when the remaining recordable capacity of the SD card is exhausted.
The items that can be set are as follows.
(Factory setting: [MED])