File name style

The file name style for recorded clips can be set in [MENU] → [REC SETTINGS] → [FILE NAME STYLE].

[P2]

If the file name style is set to [P2], the information split is included in the file name even if the file is separated by 4 GB. (Fig. 1)

The file can be handled as a single clip in editing software, etc.

In the following cases, the file is split by 4 GB and it is recorded as the P2 file name style.

When the format of the recording media is FAT32

Recording media
Format

P2

FAT32

microP2 (32 GB)

FAT32
When the recording format is OP-Atom format

[MAIN CODEC]
Format

[AVC-Intra200]

OP-Atom

[AVC-Intra100]

OP-Atom

In the following cases, “M” to indicate metadata is displayed next to the REEL number in the HOME screen and the clip number icon. (Fig. 2)

Set the [FILE NAME STYLE] to [P2]
Set the [User Clip Name] to [TYPE3]

[CINE]

CAM INDEX
REEL No.
Clip number
Date
Hashtag generated from the serial number of the recording module

The [CINE] setting of the file name style is enabled if the following conditions (where a clip is not split by 4 GB) are met.

When these conditions are not met, the setting of the file name style is forcibly switched to [P2] even if [CINE] is set in [FILE NAME STYLE]. An alert is displayed. Check the alert.

When the format of the recording media is exFAT

Recording media
Format

expressP2

exFAT

microP2 (64 GB)

exFAT

When the recording format is OP-1b format

[MAIN CODEC]	Format
[AVC-Intra4K 444]	OP-1b
[AVC-Intra4K 422]	OP-1b
[AVC-Intra4K-LT]	OP-1b
[AVC-Intra2K 444]	OP-1b
[AVC-Intra2K 422]	OP-1b
[AVC-Intra444]	OP-1b
[AVC-Intra422]	OP-1b
[ProRes 4444 XQ]	OP-1b
[ProRes 4444]	OP-1b
[ProRes 422 HQ]	OP-1b
[ProRes 422]	OP-1b
[ProRes 422 LT]	OP-1b

The following happens when [CINE] is enabled.

The file name of the main recorder and sub recorder is the same. (Fig. 1)
Recording across slots cannot be performed.
Recording stops if there is no more space on the sub recorder card even if space remains on the main recorder card.
“F” to indicate the file is displayed next to the REEL number of the HOME screen and the clip number icon. (Fig. 2)

Even when [P2] is set, the [CINE] file name style (1-5) is recorded in the metadata as [USER CLIP NAME] if [USER CLIP NAME] is set to [TYPE3].

Top of the page

Recording media	Format
P2	FAT32
microP2 (32 GB)	FAT32

[MAIN CODEC]	Format
[AVC-Intra200]	OP-Atom
[AVC-Intra100]	OP-Atom

Recording media	Format
expressP2	exFAT
microP2 (64 GB)	exFAT