Zebra patterns display

The camera can display two types of zebra patterns.

The level to display the zebra pattern can be set in [MENU] → [OUTPUT SETTINGS] → [VF EI ASSIST] → [ZEBRA].

Item

Description of settings

[ZEBRA SW]

Sets whether to superimpose the zebra signal on the output from the <VF> terminal and <VF SDI> terminal.

[ON], [OFF]

  • Factory setting: [OFF]

[ZEBRA1 DETECT]

Sets the detection level of zebra pattern 1.

[0%]…[109%]

  • Factory setting: [80%]

[ZEBRA2 DETECT]

Sets the detection level of zebra pattern 2.

[0%]…[109%]

  • Factory setting: [100%]

[ZEBRA2 MODE]

Enables/disables zebra pattern 2 and selects [SPOT].

[ON], [SPOT], [OFF]

  • Factory setting: [OFF]

[SPOT]: The image level from the setting value of [ZEBRA1 DETECT] to the setting value of [ZEBRA2 DETECT] is displayed in the zebra pattern.

co_other_zebra