System setting and recording
The camera main unit and the V-RAW recorder will operate as a single system. All the operations of the V-RAW recorder can be operated on the control panel of the recording module. The recording can also be started/stopped with the <REC> button on the recording module.
[V-RAW] format setting screen
Priority of the setting is as follows.
[FREQUENCY]
[V-RAW]
[MAIN PIXEL]
[MAIN CODEC]
[SUB CODEC]
The setting value for lower order is also changed when the setting value of higher order is changed.
Example)
When [FREQUENCY] is set to 30p or less, all [V-RAW] ([4K/12bit], [UHD/12bit], [4K/10bit], and [UHD/10bit]) can be selected.
When [FREQUENCY] is set higher than 30p, the setting that can be selected will be restricted to [4K/10bit] and [UHD/10bit].
[MAIN CODEC] can be set to [OFF] when the V-RAW recorder is connected. It is also not possible to record in the main slot or sub slot when [HIGH SPEED] is set to [ON].
The Look file (.cdl/.vlt) linked to the clip will also be recorded with the same name as the V-RAW in accordance to the in-camera color grading function in the camera main unit.
Recordable setting
[FREQUENCY]
[V-RAW]
[MAIN PIXEL]
[MAIN CODEC]
[SUB CODEC]
[HIGH SPEED]
Up to 30p
[4K/12bit]
[4096×2160]
[AVC-Intra4K 444]
[AVC-Intra422 & Pxy]
[AVC-Intra100 & Pxy]
[AVC-LongG50 & Pxy]
[AVC-LongG25 & Pxy]
—
[2048×1080]
[AVC-Intra2K 444]
[4K/10bit]
[4096×2160]
[AVC-Intra4K 422]
[AVC-Intra4K-LT]
[OFF]/[ON]
[2048×1080]
[AVC-Intra2K 422]
[UHD/12bit]
(excluding 24p)
[3840×2160]
[AVC-Intra4K 444]
—
[1920×1080]
[AVC-Intra444]
[UHD/10bit]
(excluding 24p)
[3840×2160]
[AVC-Intra4K 422]
[AVC-Intra4K-LT]
[OFF]/[ON]
[1920×1080]
[AVC-Intra200]
—
[AVC-Intra422]
[OFF]/[ON]
[AVC-Intra100]
[ProRes 4444]
[ProRes 422 HQ]
Up to 60p
[4K/10bit]
[4096×2160]
[AVC-Intra4K 422]
—
[AVC-Intra4K-LT]
[OFF]/[ON]
[2048×1080]
[AVC-Intra2K 422]
[UHD/10bit]
[3840×2160]
[AVC-Intra4K 422]
—
[AVC-Intra4K-LT]
[OFF]/[ON]
[1920×1080]
[AVC-Intra422]
[AVC-Intra100]
[ProRes 422 HQ]