[NETWORK SETUP]

[NETWORK SETUP] cannot be selected right after the power is turned on, because boot of the camera is in progress.

This is not an error. Perform operation after a while.

Item

Description of settings

[IP ADDRESS]

Sets the IP address.

  • Factory setting: [192.168.0.30]

[SUBNET MASK]

Sets the subnet mask.

  • Factory setting: [255.255.255.0]

[DEFAULT GATEWAY]

Sets the default gateway.

  • Factory setting: [192.168.0.1]

[HTTP PORT]

Sets the port number of HTTP (port number when accessing with a browser).

[1]…[65535]

  • Factory setting: [80]

[ROP PORT]

Sets the port number when connecting to ROP.

[49152], [49200]…[49299]

  • Factory setting: [49152]

[SET EXECUTE]

Selects whether to execute with the configured settings.

[NO], [YES]

[MAC ADDRESS]

Displays the MAC address. (This cannot be changed.)