Specifications

General

Power

DC e 12 V (when using an external power supply)

AC d 240 V, 50 Hz/60 Hz (when AK-UCU600P/AK-UCU600PS/AK-UCU600E/AK-UCU600ES is connected)

Power consumption

119 W (maximum, when connecting to an external 12 V and including supply to an externally connected devices)

360 W (maximum, when AK-UCU600P/AK-UCU600PS/AK-UCU600E/AK-UCU600ES is conncected and including supply to an externally connected devices)

sikaku indicates safety information.

Ambient operating temperature

−10 °C to 45 °C (14 °F to 113 °F)

(Preheating required under a temperature 0 °C (32 °F) or below)

Storage temperature

−20 °C to 60 °C (−4 °F to 140 °F)

Ambient operating humidity

85% or less (relative humidity)

Weight

Approx. 4.5 kg (9.90 lbs.) (body only, excluding the accessories)

Dimensions (W×H×D)

Body only

151 mm × 267 mm × 371.5 mm

(5-31/32 inches × 10-17/32 inches × 14-21/32 inches)

(excluding protrusions)

Camera unit

Pickup device

11.14 million pixels, MOS Sensor

Optical filter

CC: 3200 K, 4300 K, 6300 K, Cross, Diffusion

ND: CAP, Clear, 1/4, 1/16, 1/64

Lens mount

2/3-type bayonet

Sensitivity

Two shooting modes

[HIGH SENS]: F10 (59.94 Hz)/F11 (50 Hz)

[NORMAL]: F6 (59.94 Hz)/F7 (50 Hz)

2000 lx, 3200 K, when white reflectivity is 89.9%

Horizontal modulation

50% or above (27.5 MHz)

S/N

62 dB or above

Horizontal resolution

HD: 1000 TV lines or above (center)

4K: 2000 TV lines or above (center, AK-UCU600P/AK-UCU600PS/AK-UCU600E/AK-UCU600ES output)

Gain switching

[NORMAL]: −6, −3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36

[HIGH SENS]: −6, −3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36

Shutter speed

  • [59.94i]/[59.94p] mode:

    1/100, 1/120, 1/125, 1/250, 1/500, 1/1000, 1/1500, 1/2000

  • [29.97p] mode:

    1/48, 1/50, 1/60, 1/96, 1/100, 1/120, 1/125, 1/250, 1/500, 1/1000, 1/1500, 1/2000

  • [23.98p] mode:

    1/48, 1/50, 1/60, 1/96, 1/100, 1/120, 1/125, 1/250, 1/500, 1/1000, 1/1500, 1/2000

  • [50i]/[50p] mode:

    1/60, 1/100, 1/125, 1/250, 1/500, 1/1000, 1/1500, 1/2000

  • [25p] mode:

    1/48, 1/50, 1/60, 1/96, 1/100, 1/125, 1/250, 1/500, 1/1000, 1/1500, 1/2000

Video input/output

<HD SDI1> terminal

BNC × 1

3G/1.5G-SDI: 0.8 V [p-p], 75 Ω

<HD SDI2> terminal

BNC × 1

3G/1.5G-SDI: 0.8 V [p-p], 75 Ω

<AUX> terminal

BNC × 1

Functions as <HD TRUNK> terminal/<PROMPTER2> terminal by switching the setting in the menu

<HD TRUNK>: 1.5G-SDI: 0.8 V [p‑p], 75 Ω

<PROMPTER2>: VBS signal 1 V [p-p], 75 Ω

<G/L IN/PROMPTER OUT> terminal

BNC × 1

<G/L IN>: Tri-level SYNC or black burst

<PROMPTER OUT>: VBS signal 1 V [p-p], 75 Ω

Functions as <G/L IN> when standalone, and as <PROMPTER OUT> when AK-UCU600P/AK-UCU600PS/AK-UCU600E/AK-UCU600ES is connected

Audio input/output

<MIC 1> terminal

XLR × 1, 3-pin

<LINE>/<MIC>/<+48V> switchable

For <MIC>, <FRONT>/<REAR> switchable

<LINE>: 0 dBu, +4 dBu menu selection available

<MIC>: −60 dBu, −40 dBu, or −20 dBu menu can be selected

<MIC 2> terminal

XLR × 1, 3-pin

<LINE>/<MIC>/<+48V> switchable

<LINE>: 0 dBu, +4 dBu menu selection available

<MIC>: −60 dBu, −40 dBu, or −20 dBu menu can be selected

<MIC> terminal (front)

XLR × 1, 3-pin

Switchable with <MIC 1> terminal

Intercom

<INTERCOM1> terminal

XLR × 1, 5-pin

<INTERCOM2> terminal

XLR × 1, 5-pin

<EARPHONE> terminal

Stereo mini jack × 1, 3-pin

Other input/output

<OPT FIBER> terminal

Optical composite connector × 1

<LENS> terminal

12-pin × 1

<VF> terminal

20-pin × 1

<VF> terminal (rear)

29-pin × 1

<DC IN> terminal

XLR × 1, 4-pin, DC 12 V

<DC OUT 12V 1A> terminal

4-pin × 1

<RET CTRL> terminal

6-pin × 1

<EXT I/O> terminal

20-pin × 1, DC 12 V, 0.5 A

<REMOTE> terminal

10-pin × 1

<TRUNK> terminal

12-pin × 1

<DC OUT 12V 2.5A> terminal

2-pin × 1

<LAN> terminal

RJ-45 × 1

<USB2.0> terminal (host)

Type A connector, DC 5 V, 0.5 A

Build-up terminal

20-pin × 1

The symbols on this product (including the accessories) represent the following:

d AC

e DC