Checking and displaying shooting status

The screen to check the setting and status of the camera can be displayed.

Press the <DISP/MODE CHK> button while the camera image screen is displayed to hide most of the items.

Press the <DISP/MODE CHK> button for one second or more while the camera image screen is displayed to display the STATUS screen of the mode check and check the shooting status.

For details about each item that can be displayed in the mode check, refer to “Mode check display”.

The following table indicates each item to display/hide in each screen.

  • “✓” indicates displaying and “—” indicates hiding.

  • You can select to display or hide each item in the [VIDEO OUT/LCD/VF] menu → [INDICATOR].

No

Item

Camera image screen

When the <DISP/MODE CHK> button is pressed

STATUS

Playback screen

1

Time code

2

Frame rate

3

<AUTO/MANUAL> switch

4

Message display area for stop of cooling fan

5

Tally lamp command status via the network

6

Recording status (card slot 1)

✓*1

7

Remaining recording capacity and status of the memory card (card slot 1)

—*2

8

Bonding Device Status

9

External equipment recording operation control status (<SDI OUT>/<HDMI> terminal)

10

Recording status (card slot 2)

✓*1

11

Remaining recording capacity and status of the memory card (card slot 2)

—*2

12

Special recording function

13

Two-slot function

14

Flash band compensation function

15

Streaming status

16

High dynamic range recording function/dynamic range stretcher function/V-Log recording function

17

Connection status of the wired LAN, wireless LAN, and USB tethering

18

Power status

—*2

19

Audio level meter

20

Luminance of Y GET

21

Gain

22

ND filter

23

Date and time information

24

Shutter speed

25

Auto iris control status

26

High-sensitivity mode

27

Iris

28

Zoom

29

System resolution/system frequency

30

Recording format

31

Clip name

✓*3

32

Recommended ND filter

33

Message display area

34

Level gauge

35

Main face frame (orange)/face detection frame (white)

36

Tracking frame (green)

37

Error display of auto white balance

38

Error display of auto black balance

39

Remote control status in an IP connection

40

Multi manual function

—*4

41

Color temperature

42

Optical image stabilizer function

43

Scene file name

44

Upload status display

45

Area mode function/auto focus area width adjustment function/face detection/tracking AE&AF function

46

Waveform monitor

47

IR recording

48

Digital zoom

49

Focus

50

Audio monitor volume adjustment

This is not displayed in the status where imageicon_red is not displayed.

Displays when the remaining recording capacity of the memory card or remaining battery level gets low.

The display position differs in the playback screen. Refer to Screen display during playback.

Displays when the multidial, <=/&> button, <(> button, or <SET> button is pressed. The display is cleared approximately three seconds after the operation.