- Top
- Menu Operations
- Menu list
- [PAINT]
[PAINT SWITCH]
Item |
Description of settings |
[BLACK SHADING]
|
Enables/disables the black shading (saw-toothed waveform or parabolic waveform). [OFF], [ON]
|
[WHITE SHADING]
|
Enables/disables the white shading (saw-toothed waveform or parabolic waveform). [OFF], [ON]
|
[FLARE]
|
Enables/disables flare. [OFF], [ON]
|
[GAMMA]
|
Enables/disables gamma. [OFF], [ON]
|
[BLACK GAMMA]
|
Enables/disables black gamma. [OFF], [ON]
|
[KNEE]
|
Enables/disables knee. [OFF], [ON]
|
[WHITE CLIP]
|
Enables/disables white clips. [OFF], [ON]
|
[DRS SW]
|
Enables/disables dynamic range stretcher. [OFF], [ON] In the UHD mode, [---] is displayed.
|
[DETAIL]
|
Enables/disables the detail. [OFF], [ON]
|
[SKIN TONE DETAIL]
|
Enables/disables the skin tone detail. [OFF], [ON]
|
[MATRIX]
|
Enables/disables matrix (linear matrix/12-axis color correction). [OFF], [ON]
|
[LINEAR MATRIX]
|
Enables/disables linear matrix. [OFF], [ON]
|
[COLOR CORRECT]
|
Enables/disables 12-axis color correction. [OFF], [ON]
|
[PRESET MATRIX]
|
Sets the preset matrix. [NORM], [EBU], [NTSC]
|
[BLACK SHADING]
Item |
Description of settings |
[CORRECT]
|
Enables/disables black shading (saw-toothed waveform or parabolic waveform) correction. [OFF], [ON]
|
[H SAW R]
|
Adjusts the black shading gain for Rch horizontally using a saw-toothed waveform. [−100]…[+100]
|
[H SAW G]
|
Adjusts the black shading gain for Gch horizontally using a saw-toothed waveform. [−100]…[+100]
|
[H SAW B]
|
Adjusts the black shading gain for Bch horizontally using a saw-toothed waveform. [−100]…[+100]
|
[H PARA R]
|
Adjusts the black shading gain for Rch horizontally using a parabolic waveform. [−100]…[+100]
|
[H PARA G]
|
Adjusts the black shading gain for Gch horizontally using a parabolic waveform. [−100]…[+100]
|
[H PARA B]
|
Adjusts the black shading gain for Bch horizontally using a parabolic waveform. [−100]…[+100]
|
[V SAW R]
|
Adjusts the black shading gain for Rch vertically using a saw-toothed waveform. [−100]…[+100]
|
[V SAW G]
|
Adjusts the black shading gain for Gch vertically using a saw-toothed waveform. [−100]…[+100]
|
[V SAW B]
|
Adjusts the black shading gain for Bch vertically using a saw-toothed waveform. [−100]…[+100]
|
[V PARA R]
|
Adjusts the black shading gain for Rch vertically using a parabolic waveform. [−100]…[+100]
|
[V PARA G]
|
Adjusts the black shading gain for Gch vertically using a parabolic waveform. [−100]…[+100]
|
[V PARA B]
|
Adjusts the black shading gain for Bch vertically using a parabolic waveform. [−100]…[+100]
|
[PEDESTAL]
Item |
Description of settings |
[MASTER PEDESTAL]
|
Adjusts the black level of the master pedestal. For relative value display: [−99]…[99] For absolute value display: [−5.6%]…[58.4%]
|
[R PEDESTAL]
|
Sets the correction level of red to the master pedestal. [−800]…[+800]
|
[G PEDESTAL]
|
Sets the correction level of green to the master pedestal. [−800]…[+800]
|
[B PEDESTAL]
|
Sets the correction level of blue to the master pedestal. [−800]…[+800]
|
[PEDESTAL OFFSET]
|
Sets whether to maintain the Rch, Gch, and Bch pedestal levels after adjusting the automatic black balance. [ON]: Maintains the values set in [R PEDESTAL], [G PEDESTAL], and [B PEDESTAL]. [OFF]: Sets [R PEDESTAL], [G PEDESTAL], and [B PEDESTAL] to [0].
|
[MASTER PEDESTAL ABS DISP SWITCH]
|
Sets the display of [MASTER PEDESTAL]. This cannot be set in HDR mode. [ON]: Absolute value [OFF]: Relative value
|
[MASTER PEDESTAL RANGE]
|
Sets the variable amount of the master pedestal. [NORMAL]: Current variable amount [WIDE]: Double of current variable amount
|
[CHROMA]
Item |
Description of settings |
[CHROMA LEVEL SWITCH]
|
Enables/disables the gain adjustment of chroma. [OFF], [ON]
|
[CHROMA LEVEL]
|
Sets the gain adjustment of chroma. [−100%]…[+40%]
|
[COLOR TEMP SETTING]
Item |
Description of settings |
|
[COLOR TEMP PRESET] |
[COLOR TEMP PRE SWITCH]
|
Enables/disables the color temperature adjustment. [OFF], [ON]
|
[COLOR TEMP]
|
Sets the color temperature when [COLOR TEMP PRE SWITCH] is [ON]. [2000K]…[15000K]
|
|
[R GAIN]
|
Sets the correction level of red to the color temperature. [−400]…[+400]
|
|
[B GAIN]
|
Sets the correction level of blue to the color temperature. [−400]…[+400]
|
|
[G AXIS]
|
Sets the correction level of green to the color temperature. [−400]…[+400]
|
|
[COLOR TEMP ACH/BCH] |
— |
When the camera is connected to the system, only [COLOR TEMP ACH] can be set. |
[COLOR TEMP ACH]
|
Sets the color temperature when the <WHITE BAL> switch is <A>. [2000K]…[15000K]
|
|
[R GAIN ACH]
|
Sets the correction level of red to the color temperature. [−400]…[+400]
|
|
[B GAIN ACH]
|
Sets the correction level of blue to the color temperature. [−400]…[+400]
|
|
[G AXIS ACH]
|
Sets the correction level of green to the color temperature. [−400]…[+400]
|
|
[COLOR TEMP BCH]
|
Sets the color temperature when the <WHITE BAL> switch is <B>. [2000K]…[15000K]
|
|
[R GAIN BCH]
|
Sets the correction level of red to the color temperature. [−400]…[+400]
|
|
[B GAIN BCH]
|
Sets the correction level of blue to the color temperature. [−400]…[+400]
|
|
[G AXIS BCH]
|
Sets the correction level of green to the color temperature. [−400]…[+400]
|
|
[COLOR TEMP USER SW] |
[COLOR TEMP SW]
|
Enables/disables the [COLOR TEMP USER SW] item. [OFF], [ON]
|
[COLOR TEMP]
|
Sets the color temperature when any of the <USER 1>/<USER 2>/<USER 3>/<USER 4> buttons are set to [C.TEMP] and the setting is enabled. [2000K]…[15000K]
|
|
[R GAIN]
|
Sets the correction level of red to the color temperature. [−400]…[+400]
|
|
[B GAIN]
|
Sets the correction level of blue to the color temperature. [−400]…[+400]
|
|
[G AXIS]
|
Sets the correction level of green to the color temperature. [−400]…[+400]
|
|
[RGB GAIN CONTROL SETTING]
Item |
Description of settings |
|
[RGB GAIN ABS DISP SWITCH]
|
Sets whether to show the absolute value display for Ach/Bch in RGB gain. [OFF], [ON]
|
|
[G GAIN REL CONTROL SWITCH]
|
Enables/disables the relative value control of Gch gain. [OFF], [ON]
|
|
[RGB GAIN PRESET] |
[R GAIN]
|
Sets the preset value of Rch gain. [−1000]…[+1000]
|
[G GAIN]
|
Sets the preset value of Gch gain. [−1000]…[+1000]
|
|
[B GAIN]
|
Sets the preset value of Bch gain. [−1000]…[+1000]
|
|
[RGB GAIN ACH/BCH] |
— |
When the camera is connected to the CCU, only [R GAIN ACH]/[G GAIN ACH]/[B GAIN ACH]/[GAIN OFFSET ACH] can be set. |
[R GAIN ACH]
|
Sets the correction level of red to the gain. [−1000]…[+1000]
|
|
[G GAIN ACH]
|
Sets the correction level of green to the gain. [−1000]…[+1000]
|
|
[B GAIN ACH]
|
Sets the correction level of blue to the gain. [−1000]…[+1000]
|
|
[GAIN OFFSET ACH]
|
Sets whether to maintain the Rch, Gch, and Bch gain levels when adjusting the automatic white balance. [ON]: Maintains the values set in [R GAIN ACH], [G GAIN ACH], and [B GAIN ACH]. [OFF]: Sets [R GAIN ACH], [G GAIN ACH], and [B GAIN ACH] to [0].
|
|
[R GAIN BCH]
|
Sets the correction level of red to the gain. [−1000]…[+1000]
|
|
[G GAIN BCH]
|
Sets the correction level of green to the gain. [−1000]…[+1000]
|
|
[B GAIN BCH]
|
Sets the correction level of blue to the gain. [−1000]…[+1000]
|
|
[GAIN OFFSET BCH]
|
Sets whether to maintain the Rch, Gch, and Bch gain levels when adjusting the automatic white balance. [ON]: Maintains the values set in [R GAIN BCH], [G GAIN BCH], and [B GAIN BCH]. [OFF]: Sets [R GAIN BCH], [G GAIN BCH], and [B GAIN BCH] to [0].
|
|
[WHITE SHADING]
Item |
Description of settings |
[CORRECT]
|
Enables/disables the white shading (saw-toothed waveform or parabolic waveform) correction. [OFF], [ON]
|
[H SAW R]
|
Adjusts the white shading gain for Rch horizontally using a saw-toothed waveform. [−100]…[+100]
|
[H SAW G]
|
Adjusts the white shading gain for Gch horizontally using a saw-toothed waveform. [−100]…[+100]
|
[H SAW B]
|
Adjusts the white shading gain for Bch horizontally using a saw-toothed waveform. [−100]…[+100]
|
[H PARA R]
|
Adjusts the white shading gain for Rch horizontally using a parabolic waveform. [−100]…[+100]
|
[H PARA G]
|
Adjusts the white shading gain for Gch horizontally using a parabolic waveform. [−100]…[+100]
|
[H PARA B]
|
Adjusts the white shading gain for Bch horizontally using a parabolic waveform. [−100]…[+100]
|
[V SAW R]
|
Adjusts the white shading gain for Rch vertically using a saw-toothed waveform. [−100]…[+100]
|
[V SAW G]
|
Adjusts the white shading gain for Gch vertically using a saw-toothed waveform. [−100]…[+100]
|
[V SAW B]
|
Adjusts the white shading gain for Bch vertically using a saw-toothed waveform. [−100]…[+100]
|
[V PARA R]
|
Adjusts the white shading gain for Rch vertically using a parabolic waveform. [−100]…[+100]
|
[V PARA G]
|
Adjusts the white shading gain for Gch vertically using a parabolic waveform. [−100]…[+100]
|
[V PARA B]
|
Adjusts the white shading gain for Bch vertically using a parabolic waveform. [−100]…[+100]
|
[FLARE]
Item |
Description of settings |
[FLARE]
|
Enables/disables flare correction. [OFF], [ON]
|
[MASTER FLARE]
|
Adjusts the master flare. [−200]…[+200]
|
[R FLARE]
|
Adjusts the Rch flare. [−200]…[+200]
|
[G FLARE]
|
Adjusts the Gch flare. [−200]…[+200]
|
[B FLARE]
|
Adjusts the Bch flare. [−200]…[+200]
|
[GAMMA/BLACK GAMMA]
Item |
Description of settings |
[GAMMA]
|
Enables/disables gamma correction. This cannot be set in HDR mode. [OFF], [ON]
|
[GAMMA MODE SELECT]
|
Selects the type of gamma. [HD], [FILMLIKE1], [FILMLIKE2], [FILMLIKE3], [FILM REC], [VIDEO REC]
|
[MASTER GAMMA]
|
Adjusts the gamma characteristic. When [GAMMA MODE SELECT] is [HD]: [0.150]…[0.750] (0.0020 step) When [GAMMA MODE SELECT] is [FILMLIKE1]/[FILMLIKE2]/[FILMLIKE3]: [0.3000]…[0.7500] (0.0025 step) When [GAMMA MODE SELECT] is [FILM REC]/[VIDEO REC]: [0.150]…[0.750] (0.0020 step) When [MAIN MENU]→[PAINT]→[DRS]→[DRS] is [ON]: [0.150]…[0.750] (0.0020 step)
|
[R GAMMA]
|
Adjusts the gamma characteristic of red to the master gamma. [−75]…[+75]
|
[B GAMMA]
|
Adjusts the gamma characteristic of blue to the master gamma. [−75]…[+75]
|
[BLACK STRETCH LEVEL]
|
(Only when [FILM REC] is set) Sets the position of the gamma stretch. [0%]…[30%]
|
[DYNAMIC LEVEL]
|
(Only when [FILM REC] is set) Sets dynamic range. [200%], [300%], [400%], [500%]
|
[KNEE POINT]
|
(Only when [VIDEO REC] is set) Sets the knee point. [30]…[90]
|
[KNEE SLOPE]
|
(Only when [VIDEO REC] is set) Sets the knee slope. [150%], [200%], [250%], [300%], [350%], [400%], [450%], [500%], [550%], [600%]
|
[BLACK GAMMA]
|
Enables/disables black gamma. This cannot be set when [MAIN MENU] → [PAINT] → [DRS] → [DRS] → [ON] is set. [OFF], [ON]
|
[MASTER BLACK GAMMA]
|
Adjusts the gamma characteristic adjacent to black. [−48]…[+48]
|
[R BLACK GAMMA]
|
Adjusts the gamma characteristic of red adjacent to black to the master gamma. [−20]…[+20]
|
[B BLACK GAMMA]
|
Adjusts the gamma characteristic of blue adjacent to black to the master gamma. [−20]…[+20]
|
[INITIAL GAMMA]
|
Sets the gamma initial slope. When [GAMMA MODE SELECT] is [HD]: [4.0]/[4.5]/[5.0] When [GAMMA MODE SELECT] is [FILMLIKE1]/[FILMLIKE2]/[FILMLIKE3]: [4.5] (fixed) When [GAMMA MODE SELECT] is [FILM REC]/[VIDEO REC]: [4.5] (fixed)
|
[KNEE]
Item |
Description of settings |
|
[KNEE] |
—
|
Enables/disables the knee function. This cannot be set in HDR mode. [OFF], [ON]
|
[KNEE MASTER POINT]
|
Sets the knee point position. [080.00%]…[110.00%] (0.25% step)
|
|
[KNEE R POINT]
|
Adjusts the knee point of red to [KNEE MASTER POINT]. [−25.00%]…[25.00%] (0.25% step)
|
|
[KNEE B POINT]
|
Adjusts the knee point of blue to [KNEE MASTER POINT]. [−25.00%]…[25.00%] (0.25% step)
|
|
[KNEE MASTER SLOPE]
|
Sets the knee slope. [00]…[199]
|
|
[KNEE R SLOPE]
|
Adjusts the knee slope of red to [KNEE MASTER SLOPE]. [−99]…[+99]
|
|
[KNEE B SLOPE]
|
Adjusts the knee slope of blue to [KNEE MASTER SLOPE]. [−99]…[+99]
|
|
[WHITE CLIP]
Item |
Description of settings |
[WHITE CLIP]
|
Enables/disables the white clip function. This cannot be set in HDR mode. [OFF], [ON]
|
[MASTER WHITE CLIP LEVEL]
|
Sets the white clip level. [80%]…[109%]
|
[R WHITE CLIP LEVEL]
|
Adjusts red to [MASTER WHITE CLIP LEVEL]. [−15%]…[+15%]
|
[B WHITE CLIP LEVEL]
|
Adjusts blue to [MASTER WHITE CLIP LEVEL]. [−15%]…[+15%]
|
[HI-COLOR]
|
Sets whether to improve the color reproduction in high-luminance areas. [OFF], [ON]
|
[HI-COLOR LEVEL]
|
Sets the level of the mode that expands the color dynamic range. [1]…[32]
|
[DRS]
Item |
Description of settings |
[DRS]
|
Enables/disables the dynamic range stretcher function. Set this to [ON] to automatically adjust the contrast. This cannot be set in HDR mode. [OFF], [ON] In the UHD mode, [---] is displayed.
|
[EFFECT DEPTH]
|
Sets the compression level of the high-luminance areas of the dynamic range stretcher function. Set a larger value to increase the compression level of the high-luminance areas. [1]…[5] In the UHD mode, [---] is displayed.
|
[DETAIL SETTING]
Item |
Description of settings |
[DETAIL]
|
Enables/disables all detail functions. [OFF], [ON]
|
[MASTER DETAIL]
|
Sets the master detail. [−31]…[+31]
|
[H DETAIL LEVEL]
|
Sets the correction level of the horizontal detail. [00]…[63]
|
[V DETAIL LEVEL]
|
Sets the correction level of the vertical detail. [00]…[63]
|
[PEAK FREQUENCY]
|
Sets the peak frequency of the horizontal detail. UHD mode: [1]…[8]
HD mode: [12.4MHz], [12.5MHz], [12.7MHz], [12.9MHz], [13.0MHz], [13.3MHz], [13.6MHz], [13.9MHz], [14.2MHz], [14.6MHz], [15.0MHz], [15.5MHz], [16.1MHz], [16.7MHz], [17.3MHz], [18.3MHz], [18.6MHz], [18.8MHz], [19.0MHz], [19.2MHz], [19.5MHz], [19.9MHz], [20.3MHz], [20.9MHz], [21.5MHz], [22.4MHz], [23.6MHz], [25.4MHz], [28.6MHz], [37.1MHz]
|
[V DETAIL FREQUENCY]
|
Sets the vertical detail frequency. [00]…[31] In the UHD and HS mode, [---] is displayed.
|
[CRISP]
|
Sets the detail signal noise removal level. [00]…[63]
|
[DETAIL GAIN(+)]
|
Sets the detail level in the + (upward) direction. [−31]…[+31] In the UHD and HS mode, [---] is displayed.
|
[DETAIL GAIN(−)]
|
Sets the detail level in the − (downward) direction. [−31]…[+31] In the UHD and HS mode, [---] is displayed.
|
[DETAIL CLIP+]
|
Adjust the detail clip to reduce glare produced by an excess of details. [00]…[63]
|
[DETAIL CLIP−]
|
Adjusts the length of the undershoot of the detail edge component. [00]…[63]
|
[DETAIL SOURCE]
|
Sets the RGB signal component ratio to create the detail. [(G+R)/2], [(G+B)/2], [(2G+B+R)/4], [(3G+R)/4], [R], [G] In the UHD and HS mode, [---] is displayed.
|
[KNEE APERTURE LEVEL]
|
Adjusts the knee aperture level. This cannot be set in HDR mode. [00]…[39]
|
[DETAIL KNEE]
|
Adjusts the detail components of knee. [00]…[15]
|
[LEVEL DEPENDENT SWITCH]
|
Enables/disables the function to remove details of dark areas. This cannot be set in HDR mode. [OFF], [ON]
|
[LEVEL DEPENDENT]
|
Sets the level to remove details of dark areas. [00]…[15]
|
[DARK DETAIL SWITCH]
|
Enables/disables the function to emphasize details of dark areas. This cannot be set in HDR mode. [OFF], [ON]
|
[DARK DETAIL]
|
Sets the level to emphasize details of dark areas. [00]…[7]
|
[DOWNCON SETTING]
Set the details for down-converted signals.
In the HD and HS mode, [---] is displayed.
Item |
Description of settings |
|
[CHROMA] |
[CHROMA LEVEL SWITCH]
|
Enables/disables the gain adjustment of chroma. [OFF], [ON]
|
[CHROMA LEVEL]
|
Sets the gain adjustment of chroma. [−100%]…[+40%]
|
|
[DETAIL SETTING] |
[DETAIL]
|
Enables/disables all detail functions. [OFF], [ON]
|
[MASTER DETAIL]
|
Sets the master detail. [−31]…[+31]
|
|
[H DETAIL LEVEL]
|
Sets the correction level of the horizontal detail. [00]…[63]
|
|
[V DETAIL LEVEL]
|
Sets the correction level of the vertical detail. [00]…[63]
|
|
[PEAK FREQUENCY]
|
Sets the peak frequency of the horizontal detail. [12.4MHz], [12.5MHz], [12.7MHz], [12.9MHz], [13.0MHz], [13.3MHz], [13.6MHz], [13.9MHz], [14.2MHz], [14.6MHz], [15.0MHz], [15.5MHz], [16.1MHz], [16.7MHz], [17.3MHz], [18.3MHz], [18.6MHz], [18.8MHz], [19.0MHz], [19.2MHz], [19.5MHz], [19.9MHz], [20.3MHz], [20.9MHz], [21.5MHz], [22.4MHz], [23.6MHz], [25.4MHz], [28.6MHz], [37.1MHz]
|
|
[V DETAIL FREQUENCY]
|
Sets the vertical detail frequency. [00]…[31]
|
|
[CRISP]
|
Sets the detail signal noise removal level. [00]…[63]
|
|
[DETAIL GAIN(+)]
|
Sets the detail level in the + (upward) direction. [−31]…[+31]
|
|
[DETAIL GAIN(−)]
|
Sets the detail level in the − (downward) direction. [−31]…[+31]
|
|
[DETAIL CLIP+]
|
Adjust the detail clip to reduce glare produced by an excess of details. [00]…[63]
|
|
[DETAIL CLIP−]
|
Adjusts the length of the undershoot of the detail edge component. [00]…[63]
|
|
[DETAIL SOURCE]
|
Sets the RGB signal component ratio to create the detail. [(G+R)/2], [(G+B)/2], [(2G+B+R)/4], [(3G+R)/4], [R], [G]
|
|
[KNEE APERTURE LEVEL]
|
Adjusts the knee aperture level. This cannot be set in HDR mode. [00]…[39]
|
|
[DETAIL KNEE]
|
Adjusts the detail components of knee. [00]…[15]
|
|
[LEVEL DEPENDENT SWITCH]
|
Enables/disables the function to remove details of dark areas. This cannot be set in HDR mode. [OFF], [ON]
|
|
[LEVEL DEPENDENT]
|
Sets the level to remove details of dark areas. [00]…[15]
|
|
[DARK DETAIL SWITCH]
|
Enables/disables the function to emphasize details of dark areas. This cannot be set in HDR mode. [OFF], [ON]
|
|
[DARK DETAIL]
|
Sets the level to emphasize details of dark areas. [00]…[7]
|
|
[SKIN TONE DETAIL SETTING] |
[SKIN TONE DETAIL]
|
Enables/disables the skin tone detail function. [OFF], [ON]
|
[SKIN GET]
|
Selects whether to automatically obtain the color saturation and hue information from the cursor position. [NO], [YES] |
|
[MEMORY SELECT]
|
Selects the skin tone table of the subject to apply the skin tone table to. [A], [B], [C]
|
|
[CURSOR]
|
Shows/hides the box cursor in the center of the screen. [OFF], [ON]
|
|
[H POSITION]
|
Adjusts the horizontal position of the cursor. [0%]…[100%] (0.25% step)
|
|
[V POSITION]
|
Adjusts the vertical position of the cursor. [0%]…[100%] (0.25% step)
|
|
[ZEBRA]
|
Enables/disables the zebra display. [OFF], [ON]
|
|
[ZEBRA EFFECT MEMORY]
|
Selects the table of the zebra display. [A], [B], [C], [A+B], [A+C], [B+C], [A+B+C]
|
|
[SKIN TONE EFFECT MEMORY]
|
Selects the skin tone table used to apply the skin tone detail. [A], [B], [C], [A+B], [A+C], [B+C], [A+B+C]
|
|
[SKIN TONE CRISP]
|
Adjusts the skin tone detail. [−63]…[+63]
|
|
[I CENTER]
|
Sets the center position on the I axis (the area where the skin tone effect is applied). [0]…[255]
|
|
[I WIDTH]
|
Sets the width of the area where the skin tone effect is applied on the I axis with [I CENTER] being the center. [0]…[255]
|
|
[Q WIDTH]
|
Sets the width of the area where the skin tone effect is applied on the Q axis with [I CENTER] being the center. [0]…[255]
|
|
[Q PHASE]
|
Sets the phase of the area where the skin tone effect is applied with the Q axis being the reference. [0]…[359]
|
|
[SKIN TONE DETAIL SETTING]
Item |
Description of settings |
|
[SKIN TONE DETAIL]
|
Enables/disables the skin tone detail function. This cannot be set if [MAIN MENU] → [PAINT] → [DETAIL SETTING] → [DETAIL] → [OFF] is set. [OFF], [ON]
|
|
[SKIN GET] |
— |
Selects whether to automatically obtain the color saturation and hue information from the cursor position. [NO], [YES] |
[MEMORY SELECT]
|
Selects the skin tone table of the subject to apply the skin tone table to. [A], [B], [C]
|
|
[CURSOR]
|
Shows/hides the box cursor in the center of the screen. [OFF], [ON]
|
|
[H POSITION]
|
Adjusts the horizontal position of the cursor. [0%]…[100%] (0.25% step)
|
|
[V POSITION]
|
Adjusts the vertical position of the cursor. [0%]…[100%] (0.25% step)
|
|
[ZEBRA] |
—
|
Enables/disables the zebra display. [OFF], [ON]
|
[ZEBRA EFFECT MEMORY]
|
Selects the table of the zebra display. [A], [B], [C], [A+B], [A+C], [B+C], [A+B+C]
|
|
[SKIN TONE EFFECT MEMORY]
|
Selects the skin tone table used to apply the skin tone detail. [A], [B], [C], [A+B], [A+C], [B+C], [A+B+C]
|
|
[SKIN TONE CRISP]
|
Adjusts the skin tone detail. [−63]…[+63]
|
|
[I CENTER]
|
Sets the center position on the I axis (the area where the skin tone effect is applied). [0]…[255]
|
|
[I WIDTH]
|
Sets the width of the area where the skin tone effect is applied on the I axis with [I CENTER] being the center. [0]…[255]
|
|
[Q WIDTH]
|
Sets the width of the area where the skin tone effect is applied on the Q axis with [I CENTER] being the center. [0]…[255]
|
|
[Q PHASE]
|
Sets the phase of the area where the skin tone effect is applied with the Q axis being the reference. [0]…[359]
|
|
[LINEAR MATRIX]
Item |
Description of settings |
|
[PRESET MATRIX]
|
Sets the preset matrix. [NORM], [EBU], [NTSC]
|
|
[MATRIX]
|
Enables/disables the matrix function. [OFF], [ON]
|
|
[LINEAR MATRIX]
|
— |
Enables/disables the linear matrix function. [OFF], [ON]
|
[LINEAR TABLE]
|
Selects the table for linear matrix. [A], [B]
|
|
[COLOR CORRECT]
|
— |
Enables/disables the 12-axis color correction function. [OFF], [ON]
|
[COLOR CORRECT TABLE]
|
Selects the table for color correction. [A], [B]
|
|
[MATRIX (R-G)_N]
|
Adjusts the linear matrix between red and green. This item is not available when [LINEAR MATRIX] is set to [OFF]. [−31]…[+31]
|
|
[MATRIX (R-G)_P]
|
Adjusts the linear matrix between red and green. This item is not available when [LINEAR MATRIX] is set to [OFF]. [−31]…[+31]
|
|
[MATRIX (R-B)_N]
|
Adjusts the linear matrix between red and blue. This item is not available when [LINEAR MATRIX] is set to [OFF]. [−31]…[+31]
|
|
[MATRIX (R-B)_P]
|
Adjusts the linear matrix between red and blue. This item is not available when [LINEAR MATRIX] is set to [OFF]. [−31]…[+31]
|
|
[MATRIX (G-R)_N]
|
Adjusts the linear matrix between green and red. This item is not available when [LINEAR MATRIX] is set to [OFF]. [−31]…[+31]
|
|
[MATRIX (G-R)_P]
|
Adjusts the linear matrix between green and red. This item is not available when [LINEAR MATRIX] is set to [OFF]. [−31]…[+31]
|
|
[MATRIX (G-B)_N]
|
Adjusts the linear matrix between green and blue. This item is not available when [LINEAR MATRIX] is set to [OFF]. [−31]…[+31]
|
|
[MATRIX (G-B)_P]
|
Adjusts the linear matrix between green and blue. This item is not available when [LINEAR MATRIX] is set to [OFF]. [−31]…[+31]
|
|
[MATRIX (B-R)_N]
|
Adjusts the linear matrix between blue and red. This item is not available when [LINEAR MATRIX] is set to [OFF]. [−31]…[+31]
|
|
[MATRIX (B-R)_P]
|
Adjusts the linear matrix between blue and red. This item is not available when [LINEAR MATRIX] is set to [OFF]. [−31]…[+31]
|
|
[MATRIX (B-G)_N]
|
Adjusts the linear matrix between blue and green. This item is not available when [LINEAR MATRIX] is set to [OFF]. [−31]…[+31]
|
|
[MATRIX (B-G)_P]
|
Adjusts the linear matrix between blue and green. This item is not available when [LINEAR MATRIX] is set to [OFF]. [−31]…[+31]
|
|
[COLOR CORRECTION]
Item |
Description of settings |
|
[PRESET MATRIX]
|
Sets the preset matrix. [NORM], [EBU], [NTSC]
|
|
[MATRIX]
|
Enables/disables the matrix function. [OFF], [ON]
|
|
[LINEAR MATRIX]
|
— |
Enables/disables the linear matrix function. [OFF], [ON]
|
[LINEAR TABLE]
|
Selects the table for linear matrix. [A], [B]
|
|
[COLOR CORRECT]
|
— |
Enables/disables the 12-axis color correction function. [OFF], [ON]
|
[COLOR CORRECT TABLE]
|
Selects the table for color correction. [A], [B]
|
|
[G SAT]
|
Adjusts green color saturation. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+126]
|
|
[G_CY SAT]
|
Adjusts the color saturation between green and cyan. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+126]
|
|
[CY SAT]
|
Adjusts cyan color saturation. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+126]
|
|
[CY_B SAT]
|
Adjusts the color saturation between cyan and blue. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+126]
|
|
[B SAT]
|
Adjusts blue color saturation. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+126]
|
|
[B_MG SAT]
|
Adjusts the color saturation between blue and magenta. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+126]
|
|
[MG_SAT]
|
Adjusts magenta color saturation. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+126]
|
|
[MG_R SAT]
|
Adjusts the color saturation between magenta and red. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+126]
|
|
[R SAT]
|
Adjusts red color saturation. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+126]
|
|
[R_YE SAT]
|
Adjusts the color saturation between red and yellow. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+126]
|
|
[YE SAT]
|
Adjusts yellow color saturation. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+126]
|
|
[YE_G SAT]
|
Adjusts the color saturation between yellow and green. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+126]
|
|
[G PHASE]
|
Adjusts green hue. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+127]
|
|
[G_CY PHASE]
|
Adjusts the hue between green and cyan. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+127]
|
|
[CY PHASE]
|
Adjusts cyan hue. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+127]
|
|
[CY_B PHASE]
|
Adjusts the hue between cyan and blue. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+127]
|
|
[B PHASE]
|
Adjusts blue hue. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+127]
|
|
[B_MG PHASE]
|
Adjusts the hue between blue and magenta. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+127]
|
|
[MG_PHASE]
|
Adjusts magenta hue. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+127]
|
|
[MG_R PHASE]
|
Adjusts the hue between magenta and red. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+127]
|
|
[R PHASE]
|
Adjusts red hue. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+127]
|
|
[R_YE PHASE]
|
Adjusts the hue between red and yellow. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+127]
|
|
[YE PHASE]
|
Adjusts yellow hue. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+127]
|
|
[YE_G PHASE]
|
Adjusts the hue between yellow and green. This item is not available when [COLOR CORRECT] is set to [OFF]. [−127]…[+127]
|
|
[COLOR CORRECTION GET] |
— |
Obtains the color information automatically from the cursor position and moves the menu arrow to the axis whose color is to be adjusted. [NO], [YES] |
[CURSOR]
|
Shows/hides the box cursor in the center of the screen. [OFF], [ON]
|
|
[H POSITION]
|
Adjusts the horizontal position of the cursor. [0%]…[100%] (0.25% step)
|
|
[V POSITION]
|
Adjusts the vertical position of the cursor. [0%]…[100%] (0.25% step)
|
|
[SKIN CORRECTION]
Item |
Description of settings |
[SKIN AREA SW]
|
Enables/disables the function to finely adjust the color of the skin tone area. [OFF], [ON]
|
[SKIN AREA TABLE]
|
Selects the table for the skin tone area. [A], [B]
|
[SKIN AREA HUE]
|
Finely adjusts the hue of the skin tone area. [−127]…[+127]
|
[SKIN AREA TONE]
|
Finely adjusts the tone of the skin tone area. [−127]…[+126]
|
[DNR]
Item |
Description of settings |
[DNR SW]
|
Enables/disables the noise reduction function. [OFF], [ON]
|
[DNR LEVEL]
|
Sets the level of noise reduction. [1]…[5]
|
[SCENE FILE]
Item |
Description of settings |
[MODE] |
Selects the operation mode. [LOAD], [STORE]
|
[FILE NO.] |
Selects a file number. When [MODE] is [LOAD]: [OFF], [1]…[8] When [MODE] is [STORE]: [1]…[8]
|
[FILE NAME] |
Enters a file name. (15 characters or less)
|
[EXECUTE] |
Selects whether to execute with the configured settings. [NO], [YES] |
[ROP CONTROL]
Item |
Description of settings |
[CONTROL ROTATION MODE]
|
Sets the control rotation mode of ROP. [MODE1], [MODE2]
|