- Top
- Specifications
- Specifications
- Specifications
Specifications
General
Power DC AC Power consumption 119 W (maximum, when connecting to an external 12 V and including supply to an externally connected devices) 170 W (maximum, when AK-UCU600P/AK-UCU600PS/AK-UCU600E/AK-UCU600ES is conncected and including supply to an externally connected devices) |
12 V (when using an external power supply)
240 V, 50 Hz/60 Hz (when AK‑UCU600P/AK‑UCU600PS/AK‑UCU600E/AK‑UCU600ES is connected)
indicates safety information.
Ambient operating temperature |
−10 °C to 45 °C (14 °F to 113 °F) (Preheating required under a temperature 0 °C (32 °F) or below) |
Storage temperature |
−20 °C to 60 °C (−4 °F to 140 °F) |
Ambient operating humidity |
85% or less (relative humidity) |
Weight |
Approx. 4.3 kg (9.46 lbs.) (body only, excluding the accessories) |
Dimensions (W×H×D) |
Body only 151 mm × 267 mm × 374 mm (5-31/32 inches × 10-17/32 inches × 14-23/32 inches) (excluding protrusions) |
Camera unit
Pickup device |
11.14 million pixels, CMOS Sensor |
Optical filter |
ND: Clear, 1/4, 1/16, 1/64 |
Lens mount |
2/3-type bayonet |
Sensitivity |
Two shooting modes [HIGH SENS]: F10 (59.94 Hz)/F11 (50 Hz) [NORMAL]: F6 (59.94 Hz)/F7 (50 Hz) 2000 lx, 3200 K, when white reflectivity is 89.9% |
Horizontal modulation |
50% or above (27.5 MHz) |
S/N |
62 dB or above |
Horizontal resolution |
HD: 1000 TV lines or above (center) 4K: 2000 TV lines or above (center, AK-UCU600P/AK-UCU600PS/AK-UCU600E/AK-UCU600ES output) |
Gain switching |
[NORMAL]: −6, −3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36 [HIGH SENS]: −6, −3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36 |
Shutter speed |
|
System format |
3840×2160/59.94p/50p/29.97p/25p/23.98p 1920×1080/59.94p/59.94p(2×)/50p/50p(2×)/29.97p/25p/23.98p |
Video input/output
<HD SDI1> terminal |
BNC × 1 3G/1.5G-SDI: 0.8 V [p‑p], 75 Ω |
<HD SDI2> terminal |
BNC × 1 3G/1.5G-SDI: 0.8 V [p‑p], 75 Ω |
<AUX> terminal |
BNC × 1 Functions as <HD TRUNK> terminal/<PROMPTER2> terminal by switching the setting in the menu <HD TRUNK>: 1.5G-SDI: 0.8 V [p‑p], 75 Ω <PROMPTER2>: VBS signal 1 V [p‑p], 75 Ω |
<G/L IN/PROMPTER OUT> terminal |
BNC × 1 <G/L IN>: Tri-level SYNC or black burst <PROMPTER OUT>: VBS signal 1 V [p‑p], 75 Ω Functions as <G/L IN> when standalone, and as <PROMPTER OUT> when AK‑UCU600P/ AK‑UCU600PS/AK‑UCU600E/AK‑UCU600ES is connected |
Audio input/output
<MIC 1> terminal |
XLR × 1, 3-pin, female type <LINE>/<MIC>/<+48V> switchable For <MIC>, <FRONT>/<REAR> switchable <LINE>: 0 dBu, +4 dBu menu selection available <MIC>: −60 dBu, −40 dBu, or −20 dBu menu can be selected |
<MIC 2> terminal |
XLR × 1, 3-pin, female type <LINE>/<MIC>/<+48V> switchable <LINE>: 0 dBu, +4 dBu menu selection available <MIC>: −60 dBu, −40 dBu, or −20 dBu menu can be selected |
<MIC> terminal (front) |
XLR × 1, 3-pin, female type Switchable with <MIC 1> terminal |
Intercom
<INTERCOM1> terminal |
XLR × 1, 5-pin, female type |
<INTERCOM2> terminal |
XLR × 1, 5-pin, female type |
<EARPHONE> terminal |
Stereo mini jack × 1 |
Other input/output
<OPT FIBER> terminal |
Optical composite connector × 1 |
<LENS> terminal |
12-pin × 1 |
<VF> terminal |
20-pin × 1 |
<VF> terminal (rear) |
29-pin × 1 |
<DC IN> terminal |
XLR × 1, 4-pin, DC 12 V |
<DC OUT 12V 1A> terminal |
4-pin × 1 |
<RET CTRL> terminal |
6-pin × 1 |
<EXT I/O> terminal |
20-pin × 1, DC 12 V, 0.5 A |
<REMOTE> terminal |
10-pin × 1 |
<TRUNK> terminal |
12-pin × 1 |
<DC OUT 12V 2.5A> terminal |
2-pin × 1 |
<LAN> terminal |
RJ-45 × 1 |
The symbols on this product (including the accessories) represent the following:
|