[SCENE FILE SETTINGS] menu

The factory setting values and items that can be selected in [SCENE FILE SETTINGS] differ depending on the [SYSTEM SETTINGS] menu → [COLOR SETTINGS] → [MAIN] setting.

  • Meaning of the symbols used in the table are as follows.

    • —: Not a target.

Item

[MAIN]

[SCENE1 (eV-LOOK1)]*

[SCENE2 (eV-LOOK2)]*

[SCENE3 (BC-LOOK1)]*

[SCENE4 (BC-LOOK2)]*

[SCENE5 (HDR)]*

[SCENE DATA]

[LOAD]

—

—

—

—

—

[SAVE]

—

—

—

—

—

[INITIALIZE]

—

—

—

—

—

[BLACK]

[M.PED]

[0]

[2]

[8]

[8]

[1]

[R PED]

[0]

[0]

[0]

[0]

[0]

[G PED]

[0]

[0]

[0]

[0]

[0]

[B PED]

[0]

[0]

[0]

[0]

[0]

[PEDESTAL OFFSET]

[OFF]

[OFF]

[OFF]

[OFF]

[OFF]

[GAMMA]

[GAMMA SELECT]

[V-255570L1]

[V-504580L1]

[VIDEO]

[VIDEO]

[HLG]

[MASTER GAMMA]

Enabled when [GAMMA] is set to [VIDEO]

Enabled when [GAMMA] is set to [VIDEO]

[0.45]

[0.50]

Enabled when [GAMMA] is set to [VIDEO]

[BLACK GAMMA]

Enabled when [GAMMA] is set to [VIDEO]/[HLG]

Enabled when [GAMMA] is set to [VIDEO]/[HLG]

[OFF]

[OFF]

[OFF]

[B.GAMMA RANGE]

[1]

[1]

[1]

[KNEE]

[KNEE SW]

Enabled when [GAMMA] is set to [VIDEO]

Enabled when [GAMMA] is set to [VIDEO]

[ON]

[ON]

Enabled when [GAMMA] is set to [VIDEO]

[KNEE MODE]

[D RANGE]

[D RANGE]

[KNEE POINT]

[90%]

[93%]

[KNEE SLOPE]

[100]

[100]

[HLG KNEE]

[KNEE SW]

Enabled when [GAMMA] is set to [HLG]

Enabled when [GAMMA] is set to [HLG]

Enabled when [GAMMA] is set to [HLG]

Enabled when [GAMMA] is set to [HLG]

[OFF]

[KNEE POINT]

[55]

[KNEE SLOPE]

[10]

[WHITE CLIP]

[SW]

Enabled when [GAMMA] is set to [VIDEO]

Enabled when [GAMMA] is set to [VIDEO]

[OFF]

[OFF]

Enabled when [GAMMA] is set to [VIDEO]

[LEVEL]

[109%]

[109%]

[DETAIL]

[SW]

[OFF]

[OFF]

[ON]

[ON]

[OFF]

[CORING]

[0]

[0]

[0]

[0]

[0]

[MASTER LEVEL]

[0]

[0]

[0]

[0]

[0]

[FREQUENCY]

[1]

[1]

[1]

[1]

[1]

[SKIN DETAIL]

[SKIN DTL1]

[OFF]

[OFF]

[OFF]

[OFF]

[OFF]

[SKIN DTL2]

[OFF]

[OFF]

[OFF]

[OFF]

[OFF]

[SKIN DTL3]

[OFF]

[OFF]

[OFF]

[OFF]

[OFF]

[CHROMA]

[LEVEL]

[0%]

[0%]

[0%]

[15%]

[0%]

[MATRIX]

[SW]

[OFF]

[OFF]

[OFF]

[OFF]

[OFF]

[(R-G)]

[0]

[0]

[0]

[0]

[0]

[(R-B)]

[0]

[0]

[0]

[0]

[0]

[(G-R)]

[0]

[0]

[0]

[0]

[0]

[(G-B)]

[0]

[0]

[0]

[0]

[0]

[(B-R)]

[0]

[0]

[0]

[0]

[0]

[(B-G)]

[0]

[0]

[0]

[0]

[0]

[COLOR CORRECTION]

[SW]

[OFF]

[OFF]

[OFF]

[OFF]

[OFF]

[COLOR CORRECTION] - [PARAM]

[R] ([SAT])

[0]

[0]

[0]

[0]

[0]

[R] ([PHASE])

[0]

[0]

[0]

[0]

[0]

[P1]([SAT])

[0]

[0]

[0]

[0]

[0]

[P1]([PHASE])

[0]

[0]

[0]

[0]

[0]

[P2]([SAT])

[0]

[0]

[0]

[0]

[0]

[P2]([PHASE])

[0]

[0]

[0]

[0]

[0]

[P3]([SAT])

[0]

[0]

[0]

[0]

[0]

[P3]([PHASE])

[0]

[0]

[0]

[0]

[0]

[Yl]([SAT])

[0]

[0]

[0]

[0]

[0]

[Yl]([PHASE])

[0]

[0]

[0]

[0]

[0]

[P4]([SAT])

[0]

[0]

[0]

[0]

[0]

[P4]([PHASE])

[0]

[0]

[0]

[0]

[0]

[P5]([SAT])

[0]

[0]

[0]

[0]

[0]

[P5]([PHASE])

[0]

[0]

[0]

[0]

[0]

[G]([SAT])

[0]

[0]

[0]

[0]

[0]

[G]([PHASE])

[0]

[0]

[0]

[0]

[0]

[P6]([SAT])

[0]

[0]

[0]

[0]

[0]

[P6]([PHASE])

[0]

[0]

[0]

[0]

[0]

[Cy]([SAT])

[0]

[0]

[0]

[0]

[0]

[Cy]([PHASE])

[0]

[0]

[0]

[0]

[0]

[P7]([SAT])

[0]

[0]

[0]

[0]

[0]

[P7]([PHASE])

[0]

[0]

[0]

[0]

[0]

[B]([SAT])

[0]

[0]

[0]

[0]

[0]

[B]([PHASE])

[0]

[0]

[0]

[0]

[0]

[P8]([SAT])

[0]

[0]

[0]

[0]

[0]

[P8]([PHASE])

[0]

[0]

[0]

[0]

[0]

[Mg]([SAT])

[0]

[0]

[0]

[0]

[0]

[Mg]([PHASE])

[0]

[0]

[0]

[0]

[0]

[P9]([SAT])

[0]

[0]

[0]

[0]

[0]

[P9]([PHASE])

[0]

[0]

[0]

[0]

[0]

[P10]([SAT])

[0]

[0]

[0]

[0]

[0]

[P10]([PHASE])

[0]

[0]

[0]

[0]

[0]

This is the factory setting scene file name.