Connecting to the wireless access point ([INFRA(SELECT)]/[INFRA(MANUAL)])

This is the setting to connect the camera to a wireless access point.

When connecting by searching the wireless access point (SSID)

Select the [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [TYPE] → [INFRA(SELECT)].

From the [NETWORK SETTINGS] menu → [NETWORK PROPERTY], set each item as necessary.

Select the [NETWORK SETTINGS] menu → [NETWORK SEL] → [WLAN].

Select the [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [SSID].

  • Displays SSID of the searched wireless access point.

Select SSID, and select [Enter].

Setting is completed when the [ENCRYPT KEY] (encryption key, password) is not set.

If the [ENCRYPT KEY] is set, enter the password, and select [Enter].

Check the network connection.

Once connected, imageicon_rop_connect_1 is displayed on the screen of the camera.

When entering the wireless access point (SSID) manually

Select the [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [TYPE] → [INFRA(MANUAL)].

Set each item in the [NETWORK SETTINGS] menu → [NETWORK PROPERTY] as necessary.

Select the [NETWORK SETTINGS] menu → [NETWORK SEL] → [WLAN].

From the [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [SSID], enter the SSID of the wireless access point to connect.

Select SSID, and select [Enter].

Setting is completed when the [ENCRYPT KEY] (encryption key, password) is not set.

If the [ENCRYPT KEY] is set, enter the password, and select [Enter].

Check the network connection.

Once connected, imageicon_rop_connect_1 is displayed on the screen of the camera.

When connecting from the history

History of connection is saved when connected to a wireless access point. Connection is easily made with the same setting as before when connecting from the history.

Select the [NETWORK SETTINGS] menu → [CONNECTION HISTORY] → [SELECT].

The connection history is listed with the SSID of the wireless access point.

Select the SSID to connect.

Check the network connection.

Once connected, imageicon_rop_connect_1 is displayed on the screen of the camera.

When deleting the history

Select the [NETWORK SETTINGS] menu → [CONNECTION HISTORY] → [DELETE].

The connection history is listed with the SSID of the wireless access point.

Select the SSID to delete.

A confirmation message appears.

Select [SET].

Returns to Step 2.

  • To not to delete, select imageicon_return.

To continue to delete, perform Steps 2 to 3.

To exit from the operation, select the [EXIT] button.