Adjusting the audio recording level

There are manual adjustment and automatic adjustment as the adjustment method of the audio recording level.

Automatic adjustment of the recording level

Set the <CH1>/<CH2> switch to <AUTO>.

  • Audio channel 1 and audio channel 2 can individually set.

  • Following settings are disabled when the <CH1>/<CH2> switch is set to <AUTO>.

    • Adjustment of the recording level by the <AUDIO LEVEL CH1>/<AUDIO LEVEL CH2> dial

    • The [AUDIO SETTINGS] menu → [AUDIO CH SETTINGS] → [CH1 LIMITER]/[CH2 LIMITER] setting

Manual adjustment of the recording level

Set the <CH1>/<CH2> switch to <MANU>.

Adjust the recording level with the <AUDIO LEVEL CH1>/<AUDIO LEVEL CH2> dial.

  • When the input level of audio exceeds 0 dB, the level display exceeding 0 dB is displayed in red in the audio level meter in the HOME screen. This is indicating that the input volume is too high.

    Adjust so that the maximum value of the audio level does not exceed 0 dB.

Recording standard level

The recording standard level can be set.

Select the [AUDIO SETTINGS] menu → [AUDIO CH SETTINGS] → [HEAD ROOM] → [18dB]/[20dB].

Confirming the audio input level

Input level of the audio can be confirmed in the HOME screen.

osd_home