AT-KC100 Kairos Core 100 (Main Frame)

Item Specification Note
General
Power requirement AC 100-240V, 50Hz/60Hz, 8-4A 3P AC-INLET x 2 (Redundant)
Operating temperature 5 to 35 degree celsius  
Operating humidity 10% to 90% (no condensation)  
Weight 10.6kg / 23.36lb  
Dimensions (W x H x D) 438 x 43.5 x 621 mm / 17.2 x 1.7 x 24.4 in. Excluding protrusion
Video/Audio/Syncronous
Supoort Video format
Video format 4K 3840/60p, 59.94p, 50p, 30p, 29.98p, 25p, 24p, 23.97p With option AT-SF001
HD 1080/60p, 59.94p, 50p, 30p, 29.98p, 25p, 24p, 23.97p  
HD 720/60p, 59.94p, 50p  
Signal processing Y,Pb,Pr: 4:2:2 10bit  
Syncronous
PTP Sync Yes  
FS (Frame Syncronize) Yes for each CH  
I/O Specification
IP
QSFP28 QSFP28 x 2, 100GbE  
LAN RJ-45 x 2, 1GbE  
Baseband
DisplayPort DisplayPort 1.4 x 2 For Multiview output
Gateway Port Custom Interface Connectors x 8 For DELTACAST FLEX modules
SDI 12G-SDI Deltacast FLEX module is required
3G-SDI Deltacast FLEX module is required
HDMI HDMI2.0 Deltacast FLEX module is required
DisplayPort DisplayPort 1.2 Deltacast FLEX module is required
Input CH
4K Max. 6 CH With option AT-SF001
Max. 8 CH With option AT-SF001 & SF002
HD Max. 24 CH  
Max. 32 CH With option AT-SF002
Output CH
4K Max. 3 CH With option AT-SF001
Max. 4 CH With option AT-SF001 & SF002
HD Max. 12 CH  
Max. 16 CH With option AT-SF002
Function
Layer (ME) No restriction, depend on GPU performance  
Key No restriction, depend on GPU performance  
Still store 750MB storage, up to FHD resolution  
RAM recorder 8CH, 24GB, Uncompressed HD & 4K With option AT-SF001 for 4K
MediaPlayer 2CH, DNxHD HD only
ST 2110 support Yes ST 2110-10, ST 2110-20
NDI® support 2CH IN and 2CH OUT High bandwith NDI®, HD only
RTP stream support 2CH IN and 2CH OUT H.264, HD only
Panasonic PTZ control support Yes  
I/O scalar Yes HD/4K down/up conversion w/ option AT-SF001
Canvas output Yes With option AT-SF003
With AT-SF001 for up to 4K resolution per output CH
NMOS support Yes IS-04, IS-05, With option AT-SFE03
Multiviewer
Output format HD/4K  
Display 2ch, Max. 36 PiP  
Layout preset store/recall Yes  
GPU meter Yes  
Clocks Yes  
Countdowns Yes  
Images Yes  
Tally indicators Yes  
MV over IP Yes  
Effects
Luminance Key Yes  
Chroma Key Yes  
DVE(2D) effects Yes  
Border with Softness Yes  
Corner Pinning Yes  
Color Corrections Yes  
Cropping Yes  
Transition
Multimix Yes  
Offset Transitions Yes  
Transition Effects Yes  
Macros
Scene specific Macros Yes  
LUA scripting support Yes  
Color Mats
Bi-Color wash mattes Yes  
Test patterns Yes  
Tally
6 Independent tally systems Yes  
Tally by IP protocol Yes TSL5.0(incl. AK-UC4000), Panasonic AW-PTZ
External GPIO box support Yes Please refer to "Third party product" page
Accessories
AC cable 2 Cable types vary by region
Rack-mounted slide rail 1 set with screws  

AT-KC10C1 Kairos Control (Control Panel)

Item Specification Note
General
Power requirement DC 12V, 8.0A XLR 4pin x 2 (Redundant)
Operating temperature 0 to 40 degree celsius  
Operating humidity 10% to 90% (no condensation)  
Weight 15.4kg / 33.95lb  
Dimensions (W x H x D) 1140 x 94 x 420 mm / 44.9 x 3.7 x 16.5 in. Excluding protrusion
Control Terminals
LAN (Rear Panel) RJ-45 x 1, 1GbE  
USB (Control Panel) USB2.0 typeA x 1  
USB (Rear Panel) USB2.0 typeA x 1  
  • * NDI® is registered trademarks of NewTek in the United States.