Selectable functions

[INHIBIT]

Disables assignment of functions.

[SCENE FILE SEL]

Assigns the function to display the screen (the main menu → [SCENE FILE] → [FILE SELECT]) in which users select the scene file.

[LEVEL GAUGE]

Switches the level gauge display function to enabled/disabled.

[LEVEL GAUGE RESET]

Assigns the function to set the level gauge using the current horizontal and vertical directions as reference values. Holding down the assigned button will reset to the factory setting.

[WFM]

Assigns the function for switching the waveform display. Select the waveform display from the main menu → [SW MODE] → [WFM MODE].

[D.ZOOM]

Assigns the digital zoom function. Zooms in on the field angle by 2x, 5x, and 10x vertically and horizontally.

[DRS]

Assigns the dynamic range stretcher function.

[FBC]

Switches the flash band compensation function to enabled/disabled.

[S.GAIN]

Assigns the function that increases the gain to 24 dB or more. Select the gain value from the main menu → [SW MODE] → [SUPER GAIN].

[1S.EXP.]

Enables/disables the one second exposure function.

[ATW]

Switches the auto tracking white balance functions to enabled/disabled.

[ATW LOCK]

Fixes the white balance value when pressing this item while the auto tracking white balance function is activated. Resumes the auto tracking white balance function when pressing again.

[SPOTLIGHT]

Switches the auto iris control function for the spot light to enabled/disabled.

[BACKLIGHT]

Switches the auto iris control function for the backlight compensation to enabled/disabled.

[BLACKFADE]

Assigns the functions that fade out the entire image as black.

[WHITEFADE]

Assigns the functions that fade out the entire image as white.

[A.IRIS LEVEL]

Switches the auto iris setting function to enabled/disabled.

[IRIS]

Assigns the function for switching the auto iris and manual iris.

[Y GET]

Assigns the function for displaying the luminance level of the image at the position indicated by the square marker displayed near the center.

[FOCUS ASSIST]

Enables/disables the focus assist function which is set in the main menu → [SW MODE] → [FOCUS ASSIST MODE].

[FOCUS MACRO]

Switches the macro focus setting. You can set the macro function effects in the main menu → [SW MODE] → [MACRO MODE].

[OIS]

Switches the image stabilizer to enabled/disabled.

[FAST ZOOM]

Speeds up the zoom speed when the zoom lever (with the HANDLE ZOOM switch at the handle side set to <VAR>) is pushed in to the end.

[ZEBRA]

Assigns the display function of the zebra pattern and marker.

[EVF ON/OFF]

Assigns the function that forces images to be displayed in the viewfinder.

[PRE REC]

Assigns the function for switching the pre-recording function to enabled/disabled.

[TEXT MEMO]

Assigns the text memo function.

[SHOT MARK]

Assigns the shot mark function.

[DEL LAST CLIP]

Assigns the function to delete the clip shot immediately beforehand.

[SLOT SEL]

Assigns the function for switching the card to record when two or more cards are inserted in the microP2 memory card slot.

[AUDIO MON SEL]

Assigns the function to switch between the display of the audio level meter and the audio channel ([CH1]/[CH2] and [CH3]/[CH4]) of output audio (headphone, built-in speaker, and <HDMI OUT> terminal) while the button is held down.

[REC CHECK]

Assigns the recording check function.

[BACKGR REC PAUSE]

Assigns the function to cancel the background recording of slot 2. Hold down the assigned button for approx. five seconds to stop the background recording.

[USB MODE]

Assigns the function to enable/disable the USB device mode.