Selecting video output from each terminal
“—” indicates an item that cannot be selected.
Setting | Video output | ||
---|---|---|---|
[LINE&FREQ] | [SDI&HDMI SELECT] | <SDI OUT> terminal | <HDMI OUT> terminal |
[1080-59.94P] | [SYSTEM MODE] | 1080/59.94P*1 | 1080/59.94P |
[1080i] | 1080/59.94i | 1080/59.94i | |
[DOWNCON] | 480/59.94i | 480/59.94P | |
[1080-50P] | [SYSTEM MODE] | 1080/50P*2 | 1080/50P |
[1080i] | 1080/50i | 1080/50i | |
[DOWNCON] | 576/50i | 576/50P | |
[1080-59.94i] | [SYSTEM MODE] | 1080/59.94i | 1080/59.94i |
[DOWNCON] | 480/59.94i | 480/59.94P | |
[1080-50i] | [SYSTEM MODE] | 1080/50i | 1080/50i |
[DOWNCON] | 576/50i | 576/50P | |
[1080-23.98PsF] | [SYSTEM MODE] | 1080/23.98PsF*2 | — |
[DOWNCON] | 480/59.94i | — | |
[720-59.94P] | [SYSTEM MODE] | 720/59.94P | 720/59.94P |
[DOWNCON] | 480/59.94i | 480/59.94P | |
[720-50P] | [SYSTEM MODE] | 720/50P | 720/50P |
[DOWNCON] | 576/50i | 576/50P | |
[480-59.94i] | — | 480/59.94i | 480/59.94P |
— | |||
— | |||
[576-50i] | — | 576/50i | 576/50P |
— | |||
— |
Output type can be selected from [LEVEL-A] and [LEVEL-B] in the main menu → [OUTPUT SEL] → [3G-SDI OUT]. [LEVEL-B] is set in the factory settings.
When [LINE&FREQ] is set to [1080-23.98PsF] and [SDI&HDMI SELECT] is set to [SYSTEM MODE], video output from the <SDI OUT> terminal in thumbnail mode or playback mode (including recording check) becomes 1080/60P. In addition, it is not output from the <HDMI OUT> terminal. The video output signal from the <SDI OUT> terminal may be disrupted or the video in the LCD monitor and the viewfinder may be disrupted when transferring between the camera mode and the thumbnail mode (or the playback mode).