Text memo

Press the USER button to which [TEXT MEMO] is assigned while recording, playback, thumbnails.

• Pressing this button while recording or playing inserts a text memo at the instance when the button was pressed. At that instance, [TEXT MEMO] (when successful) or [TEXT MEMO INVALID] (when unsuccessful) is displayed.

• Pressing this button while the thumbnail screen is displayed inserts a text memo in the clip thumbnail (normally at the beginning) position.

Select [TEXT MEMO CLIPS] in the main menu → [CLIP] → [REPOSITION].

The thumbnails of the clips with text memos added are displayed in the upper section of the LCD monitor. The lower section of the LCD monitor shows information on the text memo on the clip selected by the cursor. (Fig. 1)

Move the cursor over the clip that contains the text memo to be played back and press the control stick.

The cursor moves to the lower section of the LCD monitor. (Fig. 2)

With the cursor located in the lower section, press the control stick to the left/right to move the cursor to the text memo number you want to play back and press the </> button.

• Playback starts from the time code position of the text memo where the cursor is located.

  If the <> button is pressed during playback or the playback has finished at the end of the clip, the thumbnail screen appears again and the cursor returns to the thumbnail of the text memo where the playback started.

• While holding down the <SHIFT> button, press the control stick upward/downward to move the cursor to the first/last text memo.

• Press the <EXIT> button to return the cursor to the upper section of the thumbnail screen.

Perform steps 1 to 2 in “Playing back from the text memo position” to select the desired text memo in a clip.

Move the cursor over the text memo to be deleted and press the control stick.

Select [DELETE] in the main menu → [CLIP] and press the control stick.

Select [YES] using the control stick.

This deletes the text memo.

Perform steps 1 to 2 in “Playing back from the text memo position” to select the desired text memo in a clip.

Move the cursor over the text memo to be copied and press the control stick.

You can select multiple text memos.

Select [COPY] in the main menu → [CLIP].

Select the copy target slot using the control stick and select [YES].

• Copying starts.

• The portion between the selected text memo and the next one is copied. If no text memo is found after the selected one, then the part after the selected text memo to the end of the clip is copied.

• If multiple text memos are selected, the selected sections are copied.

• While the clip is being copied, the progress of the copy process and cancelation will be displayed. To discontinue the copy process, press the control stick. When the [YES]/[NO] confirmation screen is displayed, use the control stick to select [YES].