Menu list

[EXIT]

Returns to the upper level.

—

Sets if the marker is displayed in the screen or not.

[ON], [OFF]

• Factory setting: [OFF]

[BOX MARKER] is set to [OFF] when [BOX MARKER] is [ON1]/[ON3] and [MARKER] is set to [ON].

[ZONE]

Selects the type of marker.

[OFF]: Marker is not displayed.

[4:3]: Marker of 4:3 size.

[13:9]: Marker of 13:9 size.

[14:9]: Marker of 14:9 size.

[CNSCO2.39]: Marker of 2.39:1 size.

[CNSCO2.35]: Marker of 2.35:1 size.

[2:1]: Marker of 2:1 size.

[VISTA]: Marker of 1.85:1 size.

[95%]: Marker of 95% area.

[93%]: Marker of 93% area.

[90%]: Marker of 90% area.

[88%]: Marker of 88% area.

[80%]: Marker of 80% area.

[USER85%]: Variable area marker between the range of 80% to 100% (in 1% steps) (can be set by pressing the <SELECT> dial button and the setting value changes to light blue) (factory setting is [85%])

• Factory setting: [4:3]

[4:3]

Selects the type of marker displayed when the image aspect ratio is 4:3.

[OFF]: Marker is not displayed.

[95%]: Marker of 95% area.

[93%]: Marker of 93% area.

[90%]: Marker of 90% area.

[88%]: Marker of 88% area.

[80%]: Marker of 80% area.

[USER85%]: Variable area marker between the range of 80% to 100% (in 1% steps) (can be set by pressing the <SELECT> dial button and the setting value changes to light blue) (factory setting is [85%])

• Factory setting: [OFF]

[BACK]

Sets the background brightness outside the marker set with [ZONE].

[NORMAL]: Normal background.

[HALF]: Background brightness is set to 50%.

[BLACK]: Background brightness is set to 0% (black).

• Factory setting: [NORMAL]

[CENTER]

Sets if the center marker is displayed or not.

[ON], [OFF]

• Factory setting: [OFF]

—

Sets the display and density of the cross hatch.

[OFF]: Does not display.

[LOW]: Dim cross hatch is displayed.

[HIGH]: Bright cross hatch is displayed.

• Factory setting: [OFF]

[SIZE]

Selects the cross hatch size.

[60]: 60 dots and 60 lines

[120]: 120 dots and 120 lines

• Factory setting: [120]

—

Sets if the box marker is displayed in the screen or not. Two patterns of [ON1] and [ON3] can be recorded.

• Factory setting: [OFF]

[MARKER] is set to [OFF] when [MARKER] is [ON] and [BOX MARKER] is set to [ON1]/[ON3].

[TYPE]

Sets the display type of the box marker.

[BOX]: Box type display.

[CROSS]: Cross type display.

• Factory setting: [BOX]

[H POS]

Sets the horizontal position to display the box marker.

[10]...[1910] (in 10 dots step)

• Factory setting: [960]

[V POS]

Sets the vertical position to display the box marker.

[10]...[1070] (in 10 lines step)

• Factory setting: [540]

[H SIZE]

Sets the horizontal size of the box marker.

[10]...[1910] (in 10 dots step)

• Factory setting: [700]

[V SIZE]

Sets the vertical size of the box marker.

[10]...[1070] (in 10 lines step)

• Factory setting: [700]

[EXIT]

Returns to the upper level.

[FUNCTION1]

Selects the function assigned to the <F1> button.

[SCAN]: Switches between the underscan and normal display.

[WFM]: Displays the waveform display screen.

[MARKER]: Displays the marker.

[FOCUS-IN-RED]: Switches the enable/disable of the function to enhance the focused part of the image (disabled when [WFM] is displayed, disabled when there is no input signal, setting is cleared when the power is turned off, and the detection sensitivity can be changed with the <SELECT> dial button during the operation when [FOCUS-IN-RED] is assigned with [MAIN MENU] → [FUNCTION] → [ASSIGN]).

[CROSS HATCH]: Switches the cross hatch display.

[MONO]: Switches between the color and monochrome display.

[UP TALLY]: Switches the on/off of the up tally lamp.

[FRONT TALLY]: Switches the brightness of the front tally lamp.

[CAM MENU]: Switches the enable/disable of the camera menu operation function (setting is canceled when the power is turned off).

[FOCUS ASSIST]: Switches the enable/disable of the focus assist function on the camera.

[ZOOM LINK]: Switches the enable/disable of the detail function on the viewfinder linked with the zoom.

[UNDEF]: Function is not assigned.

• Factory setting: [MONO]

[CAM MENU], [FOCUS ASSIST], and [ZOOM LINK] can be operated only when the camera (AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected.

[FUNCTION2]

Selects the function assigned to the <F2> button.

[SCAN]: Switches between the underscan and normal display.

[WFM]: Displays the waveform display screen.

[MARKER]: Displays the marker.

[FOCUS-IN-RED]: Switches the enable/disable of the function to enhance the focused part of the image (disabled when [WFM] is displayed, disabled when there is no input signal, setting is cleared when the power is turned off, and the detection sensitivity can be changed with the <SELECT> dial button during the operation when [FOCUS-IN-RED] is assigned with [MAIN MENU] → [FUNCTION] → [ASSIGN]).

[CROSS HATCH]: Switches the cross hatch display.

[MONO]: Switches between the color and monochrome display.

[UP TALLY]: Switches the on/off of the up tally lamp.

[FRONT TALLY]: Switches the brightness of the front tally lamp.

[CAM MENU]: Switches the enable/disable of the camera menu operation function (setting is canceled when the power is turned off).

[FOCUS ASSIST]: Switches the enable/disable of the focus assist function on the camera.

[ZOOM LINK]: Switches the enable/disable of the detail function on the viewfinder linked with the zoom.

[UNDEF]: Function is not assigned.

• Factory setting: [WFM]

[CAM MENU], [FOCUS ASSIST], and [ZOOM LINK] can be operated only when the camera (AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected.

[FUNCTION3]

Selects the function assigned to the <F3> button.

[SCAN]: Switches between the underscan and normal display.

[WFM]: Displays the waveform display screen.

[MARKER]: Displays the marker.

[FOCUS-IN-RED]: Switches the enable/disable of the function to enhance the focused part of the image (disabled when [WFM] is displayed, disabled when there is no input signal, setting is cleared when the power is turned off, and the detection sensitivity can be changed with the <SELECT> dial button during the operation when [FOCUS-IN-RED] is assigned with [MAIN MENU] → [FUNCTION] → [ASSIGN]).

[CROSS HATCH]: Switches the cross hatch display.

[MONO]: Switches between the color and monochrome display.

[UP TALLY]: Switches the on/off of the up tally lamp.

[FRONT TALLY]: Switches the brightness of the front tally lamp.

[CAM MENU]: Switches the enable/disable of the camera menu operation function (setting is canceled when the power is turned off).

[FOCUS ASSIST]: Switches the enable/disable of the focus assist function on the camera.

[ZOOM LINK]: Switches the enable/disable of the detail function on the viewfinder linked with the zoom.

[UNDEF]: Function is not assigned.

• Factory setting: [FOCUS-IN-RED]

[CAM MENU], [FOCUS ASSIST], and [ZOOM LINK] can be operated only when the camera (AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected.

[FUNCTION4]

Selects the function assigned to the <F4> button.

[SCAN]: Switches between the underscan and normal display.

[WFM]: Displays the waveform display screen.

[MARKER]: Displays the marker.

[FOCUS-IN-RED]: Switches the enable/disable of the function to enhance the focused part of the image (disabled when [WFM] is displayed, disabled when there is no input signal, setting is cleared when the power is turned off, and the detection sensitivity can be changed with the <SELECT> dial button during the operation when [FOCUS-IN-RED] is assigned with [MAIN MENU] → [FUNCTION] → [ASSIGN]).

[CROSS HATCH]: Switches the cross hatch display.

[MONO]: Switches between the color and monochrome display.

[UP TALLY]: Switches the on/off of the up tally lamp.

[FRONT TALLY]: Switches the brightness of the front tally lamp.

[CAM MENU]: Switches the enable/disable of the camera menu operation function (setting is canceled when the power is turned off).

[FOCUS ASSIST]: Switches the enable/disable of the focus assist function on the camera.

[ZOOM LINK]: Switches the enable/disable of the detail function on the viewfinder linked with the zoom.

[UNDEF]: Function is not assigned.

• Factory setting: [MARKER]

[CAM MENU], [FOCUS ASSIST], and [ZOOM LINK] can be operated only when the camera (AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected.

[ASSIGN]

Selects the function assigned to the <SELECT> dial button when the menu is not displayed.

[FOCUS-IN-RED]: Changes the detection sensitivity of the function to enhance the part that is focused in the image.

[IN-RED-COLOR]: Switches the display color of the function to enhance the part that is focused in the image.

[BACK LIGHT]: Changes the brightness of the LCD backlight.

[VF DTL]: Adjusts the detail level of the viewfinder.

[MARKER BACK]: Switches the background brightness of outside for the marker set in [MAIN MENU] → [MARKER] → [ZONE].

[BOX MARKER VF]: Switches the enable/disable of the box marker display on this unit.

[BOX MARKER CAM]: Switches the enable/disable of the box marker display on the camera.

[ZOOM LINK LEVEL]: Switches the detail level of the viewfinder linked with the zoom.

[UNDEF]: Function is not assigned.

• Factory setting: [UNDEF]

[VF DTL], [BOX MARKER CAM], and [ZOOM LINK LEVEL] can be operated only when the camera (AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected.

Selects the display setting and the operation setting (one touch, two touches) for the function assigned to the <F1>/<F2>/<F3>/<F4> buttons.

[OFF]: Does not display the function.

[ON1]: Displays the function simultaneously as setting the operation. (One touch)

[ON3]: The function is displayed first, and then the operation is set by pressing the <F1>/<F2>/<F3>/<F4> button. (Two touches)

• Factory setting: [ON1]

[EXIT]

Returns to the upper level.

—

Selects the gamma curve.

[STANDARD]: Standard mode.

[FILM]: Film mode (displays [FILM] at the top left of the screen).

• Factory setting: [STANDARD]

[FILM GAMMA]

Selects the type of the film gamma mode in accordance with the gamma setting on the camera.

[FILM REC]: When [FILM REC] is selected.

[OTHER]: When anything other than [FILM REC] is selected.

Conceptual diagram of gamma curve

[OTHER]

Brightness

[FILM REC]

[STANDARD]

Input level

• Factory setting: [FILM REC]

[COLOR TEMP.]

Selects the color temperature.

[USER 0]...[USER 63]: Variable settings 0 to 63 (equivalent to color temperature of 3000 K to 9300 K) (can be set when the <SELECT> dial button is pressed and the setting value changes to light blue).

[D93]: Equivalent to color temperature of 9300 K

[D65]: Equivalent to color temperature of 6500 K

[D56]: Equivalent to color temperature of 5600 K

• Factory setting: [D65]

[SHARPNESS MODE]

Selects the edge width of the contour correction (during peaking).

[HIGH]: Narrow edge

[LOW]: Wide edge

• Factory setting: [HIGH]

[SHARPNESS H]

Sets the horizontal contour correction.

Adds to the operation of the <PEAKING> knob.

[0]…[30]

• Factory setting: [0]

[SHARPNESS V]

Sets the vertical contour correction.

Adds to the operation of the <PEAKING> knob.

[0]…[30]

• Factory setting: [0]

[MONO]

Switches between color and monochrome.

[OFF]: Color.

[ON]: Monochrome.

• Factory setting: [OFF]

[SCAN]

Sets the underscan or normal display of the screen.

[NORMAL]: Normal display.

[UNDER]: Underscan.

• Factory setting: [NORMAL]

[BACK LIGHT]

Adjusts the brightness of the LCD backlight.

• Factory setting: [100]

[EXIT]

Returns to the upper level.

[WFM]

Sets if the waveform of the video signal input to viewfinder is displayed or not.

[FOCUS-IN-RED] is disabled when [WFM] is displayed while [FOCUS-IN-RED] is enabled.

[OFF]: Not displayed.

[WFM]: Displays the waveform of the brightness signal.

• Factory setting: [OFF]

[WFM POSITION]

Selects the position of the waveform display when [WFM] is [ON].

[LB]: Bottom left of the screen.

[RB]: Bottom right of the screen.

[RT]: Top right of the screen.

[LT]: Top left of the screen.

• Factory setting: [RB]

[TALLY ASSIGN]

Sets the illumination condition of the assignable tally lamp.

[OFF]: Turns off.

[INPUT SDI]: Turns on when the <INPUT> switch is set to <SDI>.

[INPUT CAM]: Turns on when the <INPUT> switch is set to <CAM>.

[CAM MENU]: Turns on when the menu operation function of the camera is enabled. Only when the camera (AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected.

• Factory setting: [OFF]

[MENU RESUME]

Sets the enable/disable of the menu resume function.

• Factory setting: [OFF]

[POWER LED]

Sets the illumination condition of the <POWER> lamp.

[ON]: Turns on continuously.

[OFF1]: Turns off (setting will return to [ON] when the power is turned off/on).

[OFF2]: Turns off continuously.

• Factory setting: [ON]

[STATUS DISPLAY]

Sets the display condition of the status display.

[CONTINUE]: Displays continuously.

[3SEC OFF]: Displays for three seconds after changing the condition of the status display, and then disappears.

[OFF]: Not displayed.

• Factory setting: [3SEC OFF]

[EXIT]

Returns to the upper level.

[OPERATION]

Displays the total number of hours the power was turned on.

Hours up to 262800 hours [262800H] (approximately 30 years) is displayed. Hours exceeding 262800 hours is displayed as [OVER].

[LCD]

Displays the number of hours the backlight has been on.

Hours up to 262800 hours [262800H] (approximately 30 years) is displayed. Hours exceeding 262800 hours is displayed as [OVER].

[EXIT]

Returns to the upper level.

[UP TALLY]

Sets the brightness of the up tally lamp.

[HIGH]: Turns on (bright).

[LOW]: Turns on (dark).

[OFF]: Turns off.

• Factory setting: [LOW]

[FRONT TALLY]

Sets the brightness of the front tally lamp.

[HIGH]: Turns on (bright).

[MID]: Turns on (medium).

[LOW]: Turns on (dark).

• Factory setting: [MID]

[EXIT]

Returns to the upper level.

[FOCUS-IN-RED]

—

Sets the enable/disable of the function to enhance the part that is focused in the image on this unit.

Disabled while [WFM] is displayed. Disabled when there is no input signal. (setting is canceled when the power is turned off)

• Factory setting: [OFF]

[IN-RED-COLOR]

Sets the display color of the function to enhance the part that is focused in the image on this unit.

• Factory setting: [RED]

[ZOOM LINK]

—

Sets the enable/disable of the detail function on the viewfinder linked with the zoom.

• Factory setting: [OFF]

This item can be operated only when the camera (AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected.

[LINK LEVEL]

Sets the detail level of the viewfinder linked with the zoom.

• Factory setting: [LOW]

[FOCUS ASSIST]

Sets the enable/disable of the focus assist function on the camera.

• Factory setting: [OFF]

This item can be operated only when the camera (AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected.