Upper side

body_parts_upperside
  1. Viewfinder front/back positioning lever

    To adjust the front/back position of the viewfinder, loosen this lever and slide the viewfinder forwards or backwards to adjust the viewfinder to a position that enables easy viewing. After adjusting the viewfinder, turn the lever towards <LOCK> to lock the position.

  2. Viewfinder left-right positioning ring

    To adjust the left/right position of the viewfinder, loosen this lever and slide the viewfinder to the left or right to adjust the viewfinder to a position that enables easy viewing. Tighten the lever to clamp the viewfinder in place after adjusting.

  3. Light shoe

    Used to mount a video light, etc.

  4. Microphone holder holes

    Used to mount a microphone.

  5. <PTT> switch

    Used to switch the intercom microphone on/off. The function can be changed in [MAIN MENU] → [SWITCH MODE] → [USER SWITCH] → [GRIP PTT].

  6. <RET> switch

    Used to switch to the return A signal. The function can be changed in [MAIN MENU] → [SWITCH MODE] → [USER SWITCH] → [GRIP RET].

  7. Accessory mounting hole

    Used to attach accessories. This hole is used only for the purpose of attaching accessories.

    • Mounting hole size

      • 1/4-20 UNC (screw length 13 mm or shorter)

  8. Lock release button

    Used to release the lock of the V-groove.

  9. V-groove

    Used to attach the rear viewfinder.