Camera warning displays

When AWB (automatic white balance) is executed

[AWB BREAK]	Automatic white balance has been interrupted.
[AWB HIGH LIGHT NG]	Automatic white balance cannot be executed because the light amount is excessive. Set the light amount to an appropriate level.
[AWB LOW LIGHT NG]	Automatic white balance cannot be executed because the light amount is insufficient. Set the light amount to an appropriate level.
[AWB NG CHECK FILTER]	Automatic white balance cannot be executed because of erroneous filter position. Set the correct filter position.
[AWB RCH OUT RANGE]	The white balance convergence for red cannot be achieved. Shoot a uniformly white object on the screen, and execute AWB.
[AWB BCH OUT RANGE]	The white balance convergence for blue cannot be achieved. Shoot a uniformly white object on the screen, and execute AWB.

When ASU (automatic setup) is executed

[AUTO SETUP BREAK]

Automatic setup has been interrupted.

[ASU NG]

[LENS CTL NG OUT RANGE]

The lens iris control cannot be performed.

Check the lens settings.

[ASU NG]

[AWB RCH NG]

An error in red has occurred.

Check the white balance settings.

[ASU NG]

[AWB BCH NG]

An error in blue has occurred.

Check the white balance settings.

[ASU NG]

[ABB RCH NG]

An error in red has occurred.

Check the black balance settings.

[ASU NG]

[ABB BCH NG]

An error in blue has occurred.

Check the black balance settings.

[ASU NG]

[ABB GCH NG]

An error in green has occurred.

Check the black balance settings.

[ASU NG]

[BSHD RCH NG]

An error in red has occurred.

Adjust black shading.

[ASU NG]

[BSHD BCH NG]

An error in blue has occurred.

Adjust black shading.

[ASU NG]

[BSHD GCH NG]

An error in green has occurred.

Adjust black shading.

[ASU NG]

[BSHD BREAK]

Black shading has been interrupted.

[ASU NG]

[BSHD NG]

An error in black shading has occurred.

[ASU NG]

[GAMMA RCH NG]

An error in red has occurred.

Check the gamma settings.

[ASU NG]

[GAMMA BCH NG]

An error in blue has occurred.

Check the gamma settings.

[ASU NG]

[FLARE RCH NG]

An error in red has occurred.

Check the flare settings.

[ASU NG]

[FLARE BCH NG]

An error in blue has occurred.

Check the flare settings.

[ASU NG]

[ABB MPED NG]

An error in master pedestal has occurred.

Check the master pedestal settings of automatic black balance.

[ASU NOT RUNNING(BAR)]

Automatic setup is prohibited.

[ASU NOT RUNNING(TEST)]

Automatic setup is prohibited.

[ASU NOT RUNNING(D.EXT)]

Automatic setup is prohibited.

[ASU NOT RUNNING(HDR)]

Automatic setup is prohibited.

Top of the page

[ABB BREAK]	Automatic black balance has been interrupted.
[ABB RCH OUT RANGE]	The black balance convergence for red cannot be achieved. Check if there are any errors in the image.
[ABB BCH OUT RANGE]	The black balance convergence for blue cannot be achieved. Check if there are any errors in the image.
[ABB GCH OUT RANGE]	The black balance convergence for green cannot be achieved. Check if there are any errors in the image.
[ABB NG]	The lens iris may not be closed.