[SYSTEM MODE]

[FORMAT] cannot be selected right after the power is turned on, because boot of the camera is in progress.

This is not an error. Perform operation after a while.

Item

Description of settings

[FORMAT]

Sets the system format.

[2160/59.94p], [2160/50p], [2160/29.97p], [2160/25p], [2160/23.98p], [1080/59.94p], [1080/50p], [1080/29.97p], [1080/25p], [1080/23.98p]

  • Factory setting: [2160/59.94p]

[HDR SW]

Enables/disables the HDR mode.

[OFF], [ON]

  • Factory setting: [OFF]

[COLORIMETRY]

Switches the coefficient for the Y/C conversion.

[BT.709], [BT.2020]

  • Factory setting: [BT.709]

[SHOOTING MODE]

imageicon_user_fileimageicon_reference_file

Sets the shooting mode.

[NORMAL], [HIGH SENS]

  • Factory setting: [NORMAL]

[CABLE CONNECTION]

imageicon_user_fileimageicon_reference_file

Set the connection method used between the camera and CCU.

[HYBRID], [FIBER]

  • Factory setting: [HYBRID]