[MIC SETTING]

Item

Description of settings

[MIC1 GAIN]

imageicon_user_fileimageicon_operation_file

Sets the gain when there is a microphone input to the <MIC 1> terminal.

[60dB], [40dB], [20dB]

  • Factory setting: [60dB]

[MIC1 LINE INPUT LEVEL]

imageicon_user_fileimageicon_operation_file

Sets the input level when there is a line input to the <MIC 1> terminal.

[0dB], [+4dB]

  • Factory setting: [0dB]

[MIC1 AMP]

imageicon_user_fileimageicon_operation_file

Adjusts the level of the input to the <MIC 1> terminal.

[−20dB]…[+20dB]

  • Factory setting: [0dB]

[MIC2 GAIN]

imageicon_user_fileimageicon_operation_file

Sets the gain when there is a microphone input to the <MIC 2> terminal.

[60dB], [40dB], [20dB]

  • Factory setting: [60dB]

[MIC2 LINE INPUT LEVEL]

imageicon_user_fileimageicon_operation_file

Sets the input level when there is a line input to the <MIC 2> terminal.

[0dB], [+4dB]

  • Factory setting: [0dB]

[MIC2 AMP]

imageicon_user_fileimageicon_operation_file

Adjusts the level of the input to the <MIC 2> terminal.

[−20dB]…[+20dB]

  • Factory setting: [0dB]

[MIC2 INPUT SELECT]

imageicon_user_fileimageicon_operation_file

Sets the input signal for the <MIC 2> terminal.

This item can be set only when the PGM option is used.

[FRONT MIC], [OFF]

  • Factory setting: [OFF]

[FRONT MIC POWER]

imageicon_user_fileimageicon_operation_file

Enables/disables the phantom power (48 V) for the external microphone connected to the <MIC> terminal (front).

[ON], [OFF]

  • Factory setting: [OFF]