[Maintenance] screen

Check system logs, confirm software versions, or initialize the camera.

The screen consists of three tabs, [Product info.], [Default reset], and [Back up].

[Product info.] tab

Displays the software version of the camera.

Displays information of the camera such as [Model no.], [MAC address], [Serial no.], and [Firmware version].

other_web_setUp_maintenance_product_info

Item

Description of settings

[Model no.]

Displays the model number of the camera.

[MAC address]

Displays the MAC address of the camera.

[Firmware version]

[CPU Software - CAM MAIN]: Displays the camera’s main software version.

[CPU Software - NETWORK]: Displays the software version of the network component.

[EEPROM - ROM TABLE]: Displays the version of the camera table.

[FPGA - CAM FPGA]: Displays the camera’s FPGA version.

[FPGA - AVIO FPGA]: Displays the FPGA version of the image processing component.

[FPGA - INCOM FPGA]: Displays the FPGA version of the power supply and audio control component.

[Viewer software installation counter]

Displays the number of plugin software for display that has been installed automatically from the camera.

[Default reset] tab

Initialize the setting data of the camera and restart the camera.

other_web_setUp_maintenance_default_reset

Item

Description of settings

[Reset to the default (Except the network settings)]

By clicking the [Execute] button, resets the configuration of the camera to its default settings.

The user name and password used for login are also reset to their default values (admin/12345).

After executing the reset operation, the camera cannot be operated for approximately three minutes.

The following setting items will not be reset.

  • All items for [IPv4 network]

  • [HTTP port]

  • [Line speed]

  • [Bandwidth control (bitrate)]

[Back up] tab

You can save network-related settings to a computer, or apply the settings saved in a computer to the camera.

other_web_setUP_maintenance_backup

Item

Description of settings

[Download]

Saves the network-related settings of the camera to a computer. (Saving the network-related settings of the camera to a computer ([Download]))

[Upload]

Uploads the setting file of the camera saved in a computer using the download function. (Applying the settings saved in a computer to the camera ([Upload]))