[DISPLAY SETUP]

[MARKER]

Item

Description of settings

[FOCUS ASSIST SW]

imageicon_user_fileimageicon_operation_file

Enables/disables the focus assist switch.

[OFF], [ON]

  • Factory setting: [OFF]

[FOCUS ASSIST MODE]

imageicon_user_fileimageicon_operation_file

Sets whether to cancel the focus assist by the switch or by the duration of time.

[SW], [INSTANT]

  • Factory setting: [SW]

[CANCEL TIME]

imageicon_user_fileimageicon_operation_file

Sets the duration of time before cancelling the focus assist when [INSTANT] is selected.

[1sec], [3sec], [5sec], [10sec], [20sec]

  • Factory setting: [5sec]

[FOCUS ASSIST]

Displays the type of the focus assist.

[IN RED SW]

imageicon_user_fileimageicon_operation_file

Enables/disables the IN RED switch.

[OFF], [ON]

  • Factory setting: [OFF]

[IN RED COLOR]

imageicon_user_fileimageicon_operation_file

Sets the color for IN RED.

[RED], [GREEN], [BLUE], [WHITE]

  • Factory setting: [RED]

[SQUARE SW]

imageicon_user_fileimageicon_operation_file

Enables/disables the SQUARE switch.

[OFF], [ON]

  • Factory setting: [OFF]

[SQUARE COLOR]

imageicon_user_fileimageicon_operation_file

Sets the color for the SQUARE.

[RED], [GREEN]

  • Factory setting: [GREEN]

[BAR SW]

imageicon_user_fileimageicon_operation_file

Enables/disables the BAR switch.

[OFF], [ON]

  • Factory setting: [OFF]

[MAG SW]

imageicon_user_fileimageicon_operation_file

Enables/disables the magnification display function.

[OFF], [ON]

  • Factory setting: [OFF]

[ZEBRA]

imageicon_user_fileimageicon_operation_file

Enables/disables the luminance zebra.

[OFF], [ON]

  • Factory setting: [OFF]

[ZEBRA1 LEVEL]

imageicon_user_fileimageicon_operation_file

Sets the level of the luminance zebra 1.

[0%]…[109%]

  • Factory setting: [80%]

[ZEBRA2 LEVEL]

imageicon_user_fileimageicon_operation_file

Sets the level of the luminance zebra 2.

[0%]…[109%]

  • Factory setting: [100%]

[ZEBRA PATTERN]

imageicon_user_fileimageicon_operation_file

Sets the pattern of the luminance zebra.

[1], [1+2], [SPOT]

  • Factory setting: [1]

[FRAME LEVEL SWITCH]

imageicon_user_fileimageicon_operation_file

Shows/hides the level display outside the frame marker.

[OFF], [ON]

  • Factory setting: [OFF]

[FRAME LEVEL]

imageicon_user_fileimageicon_operation_file

Sets the level to be displayed outside the frame marker.

[0]…[31]

  • Factory setting: [31]

[FRAME MARK SWITCH]

imageicon_user_fileimageicon_operation_file

Shows/hides the frame marker.

[OFF], [ON]

  • Factory setting: [OFF]

[FRAME SIG]

imageicon_user_fileimageicon_operation_file

Sets the aspect ratio of the frame marker.

[4:3], [13:9], [14:9], [15:9], [16:9], [CINEMA], [VISTA]

  • Factory setting: [4:3]

[SAFETY MARK1 SWITCH]

imageicon_user_fileimageicon_operation_file

Shows/hides the safety marker 1.

[OFF], [ON]

  • Factory setting: [OFF]

[SAFETY MARK1]

imageicon_user_fileimageicon_operation_file

Sets the aspect ratio of safety marker 1.

[16:9], [15:9], [14:9], [13:9], [4:3]

  • Factory setting: [16:9]

[SAFETY AREA1]

imageicon_user_fileimageicon_operation_file

Sets the size of safety area 1.

[80%]…[100%]

  • Factory setting: [80%]

[SAFETY MARK2 SWITCH]

imageicon_user_fileimageicon_operation_file

Shows/hides the safety marker 2.

[OFF], [ON]

  • Factory setting: [OFF]

[SAFETY MARK2]

imageicon_user_fileimageicon_operation_file

Sets the aspect ratio of safety marker 2.

[16:9], [15:9], [14:9], [13:9], [4:3]

  • Factory setting: [4:3]

[SAFETY AREA2]

imageicon_user_fileimageicon_operation_file

Sets the size of safety marker 2.

[80%]…[100%]

  • Factory setting: [93%]

[EFFECTIVE AREA MARK]

imageicon_user_fileimageicon_operation_file

Shows/hides the effective area marker.

[OFF], [ON]

  • Factory setting: [OFF]

[PF LENS AREA MARK]

imageicon_user_fileimageicon_operation_file

Shows/hides the auto focus area marker of the PF lens.

[OFF], [AUTO]

  • Factory setting: [OFF]

[CENTER MARK]

imageicon_user_fileimageicon_operation_file

Shows/hides the center marker.

[OFF], [ON]

  • Factory setting: [OFF]

[CENTER MARK SELECT]

imageicon_user_fileimageicon_operation_file

Sets the size of the center marker.

[1]…[8]

  • Factory setting: [1]

[LINE WIDTH]

imageicon_user_fileimageicon_operation_file

Sets the thickness of the center marker frame.

[1]…[3]

  • Factory setting: [2]

[MARKER LEVEL]

imageicon_user_fileimageicon_operation_file

Sets the brightness of the markers and on-screen display.

[50%]…[100%]

  • Factory setting: [100%]

[USER BOX]

imageicon_user_fileimageicon_operation_file

Shows/hides the user box.

[OFF], [ON]

  • Factory setting: [OFF]

[MEMORY SELECT]

imageicon_user_fileimageicon_operation_file

Configures the memory of the user box.

[1], [2], [3]

  • Factory setting: [1]

[H POSITION]

imageicon_user_fileimageicon_operation_file

Adjusts the horizontal position of the user box.

[−50]…[50]

  • Factory setting: [0]

[H OFFSET]

imageicon_user_fileimageicon_operation_file

Finely adjusts the horizontal offset of the user box.

[−10]…[10]

  • Factory setting: [0]

[V POSITION]

imageicon_user_fileimageicon_operation_file

Adjusts the vertical position of the user box.

[−50]…[50]

  • Factory setting: [0]

[V OFFSET]

imageicon_user_fileimageicon_operation_file

Finely adjusts the vertical offset of the user box.

[−10]…[10]

  • Factory setting: [0]

[WIDTH]

imageicon_user_fileimageicon_operation_file

Adjusts the width of the user box.

[0]…[100]

  • Factory setting: [50]

[HEIGHT]

imageicon_user_fileimageicon_operation_file

Adjusts the height of the user box.

[0]…[100]

  • Factory setting: [50]

[BOX/CROSS]

imageicon_user_fileimageicon_operation_file

Sets the shape of the user box.

[BOX], [CROSS]

  • Factory setting: [BOX]

[EFFECT MEMORY1]

imageicon_user_fileimageicon_operation_file

Configures the valid memory of the user box.

[OFF], [ON]

  • Factory setting: [OFF]

[EFFECT MEMORY2]

imageicon_user_fileimageicon_operation_file

Configures the valid memory of the user box.

[OFF], [ON]

  • Factory setting: [OFF]

[EFFECT MEMORY3]

imageicon_user_fileimageicon_operation_file

Configures the valid memory of the user box.

[OFF], [ON]

  • Factory setting: [OFF]

[VIEW FINDER DETAIL]

Item

Description of settings

[VIEW FINDER DETAIL]

imageicon_user_fileimageicon_operation_file

Adjusts the details of the viewfinder.

[0]…[23]

  • Factory setting: [7]

[ZOOM LINK]

imageicon_user_fileimageicon_operation_file

Enables/disables the details of the zoom-interlocked viewfinder.

[OFF], [ON]

  • Factory setting: [OFF]

[ZOOM LINK LEVEL]

imageicon_user_fileimageicon_operation_file

Adjusts the detail level of the zoom-interlocked viewfinder.

[1]…[5]

  • Factory setting: [3]

[RETURN SIGNAL]

[HD PEAK FREQUENCY]

imageicon_user_fileimageicon_operation_file

Adjusts the peak frequency of the return signal.

[LOW], [MID], [HIGH]

  • Factory setting: [LOW]

[HD OFFSET GAIN]

imageicon_user_fileimageicon_operation_file

Adjusts the detail offset gain of the return signal.

[0]…[5]

  • Factory setting: [0]

[HD CRISP]

imageicon_user_fileimageicon_operation_file

Adjusts the detail crisp level of the return signal.

[0]…[63]

  • Factory setting: [0]

[VIEW FINDER DISPLAY]

Item

Description of settings

[F NUMBER]

imageicon_user_fileimageicon_operation_file

Shows/hides the iris display (F value).

[OFF], [ON]

  • Factory setting: [OFF]

This is displayed when you use a lens that outputs position information.

[ZOOM]

imageicon_user_fileimageicon_operation_file

Shows/hides the zoom position display.

[OFF], [ON]

  • Factory setting: [OFF]

This is displayed when you use a lens that outputs position information.

[FOCUS]

imageicon_user_fileimageicon_operation_file

Shows/hides the focus position display.

[OFF], [ON]

  • Factory setting: [OFF]

This is displayed when you use a lens that outputs position information.

[FOCUS CONDITION]

imageicon_user_fileimageicon_operation_file

Shows/hides the focus information display.

[OFF], [ON]

  • Factory setting: [OFF]

[EXTENDER]

imageicon_user_fileimageicon_operation_file

Shows/hides the extender display.

[OFF], [ON]

  • Factory setting: [OFF]

[FILTER]

imageicon_user_fileimageicon_operation_file

Shows/hides the filter position display.

[OFF], [ON]

  • Factory setting: [OFF]

[MASTER GAIN]

imageicon_user_fileimageicon_operation_file

Shows/hides the master gain display.

[OFF], [ON]

  • Factory setting: [OFF]

[OFFSET GAIN]

imageicon_user_fileimageicon_operation_file

Shows/hides the offset gain display.

[OFF], [ON]

  • Factory setting: [OFF]

[SHUTTER]

imageicon_user_fileimageicon_operation_file

Shows/hides the electronic shutter display.

[OFF], [ON]

  • Factory setting: [OFF]

[AUDIO LEVEL]

imageicon_user_fileimageicon_operation_file

Shows/hides the audio level (level meter) display.

[OFF], [ON]

  • Factory setting: [OFF]

[DIGITAL EXTENDER]

imageicon_user_fileimageicon_operation_file

Shows/hides the digital extender display.

[OFF], [ON]

  • Factory setting: [OFF]

[WHITE CHANNEL]

imageicon_user_fileimageicon_operation_file

Shows/hides the white balance memory display.

[OFF], [ON]

  • Factory setting: [OFF]

[DRS]

imageicon_user_fileimageicon_operation_file

Shows/hides the dynamic range stretcher display.

[OFF], [ON]

  • Factory setting: [OFF]

[CAC]

imageicon_user_fileimageicon_operation_file

Shows/hides the chromatic aberration compensation (CAC) display.

[OFF], [ON]

  • Factory setting: [OFF]

[OPT LEVEL]

imageicon_user_fileimageicon_operation_file

Shows/hides the display of the level of the optical signal received by the camera.

[OFF], [ON]

  • Factory setting: [OFF]

[RETURN SELECT]

imageicon_user_fileimageicon_operation_file

Shows/hides the return ID display.

[OFF], [ON]

  • Factory setting: [OFF]

[STATUS]

imageicon_user_fileimageicon_operation_file

Shows/hides the display appearing when functions are selected.

[OFF], [ON]

  • Factory setting: [OFF]

[STATUS(AUTO)]

imageicon_user_fileimageicon_operation_file

Shows/hides the display appearing when AWB/ABB/ASU are activated or deactivated.

[OFF], [ON]

  • Factory setting: [OFF]

[SENSOR RATE]

imageicon_user_fileimageicon_operation_file

Shows/hides the sensor imaging rate display.

[OFF], [ON]

  • Factory setting: [OFF]

[VOLTAGE]

imageicon_user_fileimageicon_operation_file

Shows/hides the power supply display.

[OFF], [ON]

  • Factory setting: [OFF]

[SYSTEM MODE]

imageicon_user_fileimageicon_operation_file

Shows/hides the system frequency/resolution display.

[OFF], [ON]

  • Factory setting: [OFF]

[FAN OFF]

imageicon_user_fileimageicon_operation_file

Shows/hides the status display when the fan is off.

[OFF], [ON]

  • Factory setting: [OFF]

[MONI OUT SIGNAL]

imageicon_user_fileimageicon_operation_file

Shows/hides the monitor output signal type display.

[OFF], [ON]

  • Factory setting: [OFF]

[COLOR TEMP]

imageicon_user_fileimageicon_operation_file

Shows/hides the color temperature display.

[OFF], [ON]

  • Factory setting: [OFF]

[FBC]

imageicon_user_fileimageicon_operation_file

Shows/hides the flash band compensation display.

[OFF], [ON]

  • Factory setting: [OFF]

[SHOOTING MODE]

imageicon_user_fileimageicon_operation_file

Shows/hides the sensitivity mode display.

[OFF], [ON]

  • Factory setting: [OFF]

[LEVEL GAUGE]

imageicon_user_fileimageicon_operation_file

Shows/hides the level gauge display.

[OFF], [ON]

  • Factory setting: [OFF]

[MAG]

imageicon_user_fileimageicon_operation_file

Shows/hides the status display when the focus assist magnification display function is enabled.

[OFF], [ON]

  • Factory setting: [ON]

[MENU DISP WARNING]

imageicon_user_fileimageicon_operation_file

Shows/hides the menu warning display.

[OFF], [ON]

  • Factory setting: [ON]

[F DROP ADJUST]

imageicon_user_fileimageicon_operation_file

Shows/hides the F drop display.

[OFF], [ON]

  • Factory setting: [OFF]

[HDR]

imageicon_user_fileimageicon_operation_file

Shows/hides the HDR display.

[OFF], [ON]

  • Factory setting: [OFF]

[CHARACTER SIZE]

imageicon_user_fileimageicon_operation_file

Selects the character size for display on the viewfinder.

[LARGE], [SMALL]

  • Factory setting: [SMALL]

[DISPLAY TYPE]

imageicon_user_fileimageicon_operation_file

Selects the black frame mode for display on the viewfinder.

[NORMAL], [FRAME]

  • Factory setting: [NORMAL]

[MODE CHECK IND]

Item

Description of settings

[AUDIO]

imageicon_user_fileimageicon_operation_file

Shows/hides the [AUDIO] screen during the mode check.

[OFF], [ON]

  • Factory setting: [ON]

[USER SW STATUS]

imageicon_user_fileimageicon_operation_file

Shows/hides the [USER SW STATUS] screen during the mode check.

[OFF], [ON]

  • Factory setting: [ON]

[!LED]

imageicon_user_fileimageicon_operation_file

Shows/hides the [!LED] screen during the mode check.

[OFF], [ON]

  • Factory setting: [ON]

[SDI OUT]

imageicon_user_fileimageicon_operation_file

Shows/hides the [SDI OUT] screen during the mode check.

[OFF], [ON]

  • Factory setting: [ON]

[CAC]

imageicon_user_fileimageicon_operation_file

Shows/hides the [CAC] screen during the mode check.

[OFF], [ON]

  • Factory setting: [ON]

[!LED]

For items whose setting is [ON], the LED in the viewfinder (imageicon_caution) lights up when the operating status of the camera becomes irregular.

Item

Description of settings

[GAMMA OFF]

imageicon_user_fileimageicon_operation_file

Shows/hides the status display when gamma is disabled.

[OFF], [ON]

  • Factory setting: [OFF]

[SHUTTER]

imageicon_user_fileimageicon_operation_file

Shows/hides the status display when the electronic shutter is enabled.

[OFF], [ON]

  • Factory setting: [OFF]

[EXTENDER]

imageicon_user_fileimageicon_operation_file

Shows/hides the status display when the lens extender is enabled.

[OFF], [ON]

  • Factory setting: [OFF]

[FAN OFF]

imageicon_user_fileimageicon_operation_file

Shows/hides the status display when the fan is off.

[OFF], [ON]

  • Factory setting: [OFF]

[MASTER GAIN]

imageicon_user_fileimageicon_operation_file

Shows/hides the status display when the gain is other than 0 dB.

[OFF], [ON]

  • Factory setting: [OFF]

[BLACK GAMMA]

imageicon_user_fileimageicon_operation_file

Shows/hides the status display when the black gamma is enabled.

[OFF], [ON]

  • Factory setting: [OFF]