- Top
- Menu Operations
- Menu list
- [IN/OUT SELECT]
[IN/OUT SELECT]
Item | Description of settings | |
---|---|---|
[CALL TALLY] |
Sets whether the rear tally lamp is to be lit up when called. [OFF]: Turned off. [R]: Red tally lights up. [T]: Up tally lights up. [R&T]: Red tally and up tally light up.
| |
[TALLY GUARD] |
Enables/disables automatic white balance, automatic black balance, and automatic setup when the tally lamp is lit. [OFF], [ON]
| |
[HD-SDI1 OUT] |
Configures the video output from the <HD SDI1> terminal. [CAM]: Outputs camera images. [HD PROMPT]: Outputs HD prompter video images.
| |
[HD-SDI1 OUTPUT FORMAT] |
Sets the signal format of the video output from the <HD SDI1> terminal. [1080i], [1080P], [720P]
| |
[HD-SDI1 OUTPUT ITEM] |
Selects details of the characters superimposed on images output from the <HD SDI1> terminal. [MENU ONLY]: Displays only on the menu. [STATUS]: Displays all characters that are the same as in the viewfinder display.
| |
[HD-SDI1 CHAR] |
Sets whether to superimpose characters on images output from the <HD SDI1> terminal. This cannot be set when the output format is [720P]. [OFF], [ON]
| |
[HD-SDI1 CHAR SIZE] |
Sets the size of the characters superimposed on images output from the <HD SDI1> terminal. [LARGE], [SMALL]
| |
[HD-SDI1 3G-SDI] |
Sets the output format when the video output from the <HD SDI1> terminal is in 3G format. [LEVEL-A], [LEVEL-B]
| |
[HD-SDI2 OUT] |
Configures the video output from the <HD SDI2> terminal. [CAM]: Outputs camera images. [VF]: Outputs viewfinder images. [RET]: Outputs return images. [RET1], [RET2], [RET3], [RET4]: Outputs fixed return images.
| |
[HD-SDI2 OUTPUT FORMAT] |
Sets the signal format of the video output from the <HD SDI2> terminal. [1080i], [1080P], [720P]
| |
[HD-SDI2 OUTPUT ITEM] |
Selects details of the characters superimposed on images output from the <HD SDI2> terminal. [MENU ONLY]: Displays only on the menu. [STATUS]: Displays all characters that are the same as in the viewfinder display.
| |
[HD-SDI2 CHAR] |
Sets whether to superimpose characters on images output from the <HD SDI2> terminal. This cannot be set when the output format is [720P]. [OFF], [ON]
| |
[HD-SDI2 CHAR SIZE] |
Selects the size of the characters superimposed on images output from the <HD SDI2> terminal. [LARGE], [SMALL]
| |
[HD-SDI2 3G-SDI] |
Sets the output format when the video output from the <HD SDI2> terminal is in 3G format. [LEVEL-A], [LEVEL-B]
| |
[HD-SDI2 POWER] |
Enables/disables the power supply of the <HD SDI2> terminal. [ACTIVE], [SAVE]
| |
[AUX I/O] |
Configures the video output from the <AUX> terminal. [PMT2 OUT], [HD TRUNK]
| |
[VF OUT] |
Configures the video output from the <VF> terminal. [Y/C], [R], [G], [B], [NAM]
| |
[TRUNK1] |
Sets the serial interface standard of the <TRUNK> terminal. [RS422], [RS232C]
| |
[TRUNK2] |
Sets the serial interface standard of the <TRUNK> terminal. [RS422], [RS232C]
| |
[BACK LIGHT] |
Sets the brightness of the backlight. [1]…[70]
| |
[LAN] |
Sets the usage for the <LAN> terminal. [TRUNK], [PC]
| |
[B/U LENS] |
Sets the lens type of the Build-up Unit. [PORTABLE], [BOX]
| |
[T-BAR CONNECT] |
Sets whether to connect the T-BAR unit. [OFF], [ON]
| |
[LENS I/F] |
Sets the lens interface. [ANALOG], [SERIAL]
| |
[DISPLAY STATUS/BAR OSD] |
[CAM ID CHARACTER] |
Sets the camera name. |
[GEN-LOCK] |
[H PHASE-COARSE] |
Roughly adjusts the phase of horizontal synchronization. [−5]…[+5]
|
[H PHASE-FINE] |
Finely adjusts the phase of horizontal synchronization. [−100]…[+100]
|