[FILE]

[SD CARD]

[SD CARD] cannot be selected right after the power is turned on, because boot of the camera is in progress.

This is not an error. Perform operation after a while.

Item

Description of settings

[MODE]

Selects the operation mode.

[FORMAT], [LOAD], [STORE]

  • Factory setting: [LOAD]

[FILE SEL]

Selects a file.

[ALL], [ALL SCENE], [ALL USER], [ALL LENS], [SCENE], [USER], [LENS]

  • Factory setting: [SCENE]

[FILE NO.]

Selects a file number.

[CURRENT], [1]…[8] (Scene file)

[1]…[3] (User file)

[1]…[32] (Lens file)

[CURRENT] (Operation file)

  • Factory setting: [1]

[FILE NAME]

Enters a file name. (15 characters or less)

  • Factory setting: [SCENE1]

[SD FILE NO.]

Selects the file number of the SD memory card.

[1]…[100]

  • Factory setting: [1]

[EXECUTE]

Selects whether to execute with the configured settings.

[NO], [YES]

[SCENE FILE]

Item

Description of settings

[MODE]

Selects the operation mode.

[LOAD], [STORE]

  • Factory setting: [LOAD]

[FILE NO.]

Selects a file.

When [MODE] is set to [LOAD]:

[OFF], [1]…[8]

  • Factory setting: [OFF]

When [MODE] is set to [STORE]:

[1]…[8]

  • Factory setting: [1]

[FILE NAME]

Enters a file name. (15 characters or less)

  • Factory setting: [SCENE1]

[EXECUTE]

Selects whether to execute with the configured settings.

[NO], [YES]

[USER FILE]

Item

Description of settings

[MODE]

Selects the operation mode.

[LOAD], [STORE]

  • Factory setting: [LOAD]

[FILE NO.]

Selects a file.

[1], [2], [3]

  • Factory setting: [1]

[FILE NAME]

Enters a file name. (15 characters or less)

  • Factory setting: [USER1]

[EXECUTE]

Selects whether to execute with the configured settings.

[NO], [YES]

[REFERENCE FILE]

Item

Description of settings

[MODE]

Selects the operation mode.

[LOAD], [STORE]

  • Factory setting: [LOAD]

[FILE NO.]

Selects a file.

[1], [2], [3]

  • Factory setting: [1]

[FILE NAME]

Enters a file name. (15 characters or less)

  • Factory setting: [REFERENCE1]

[EXECUTE]

Selects whether to execute with the configured settings.

[NO], [YES]

[CAC FILE]

[CAC FILE] cannot be selected right after the power is turned on, because boot of the camera is in progress.

This is not an error. Perform operation after a while.

Item

Description of settings

[CARD FILE SELECT]

Selects a file.

[1]…[100]

  • Factory setting: [1]

[READ]

Loads CAC files.

[YES], [NO]

[DELETE]

Deletes the CAC file in the SD memory card.

[NO], [YES]