Operating Instructions AG-CX350
Sets the setting regarding the network function.
Select the device that connects external equipment (computer, etc.) to the camera.
The camera may restart when the setting is changed.
[LAN] |
Connects via a wired LAN. |
[WLAN] |
Connects via a wireless LAN. |
[OFF] |
Does not connect. |
(Factory setting: [OFF])
Selects the network function of the camera.
[STREAMING] |
Enables the streaming function. |
[NDI|HX] |
Enables the NDI|HX function. |
[OFF] |
Does not use the network function. |
(Factory setting: [OFF])
Perform settings for the IP remote. (remote operation by the CX ROP app)
Sets whether to enable the IP remote function.
The items that can be set are as follows.
[ENABLE], [DISABLE]
(Factory setting: [DISABLE])
Registers a new user account to use for authentication in the network function of the camera. (Maximum of ten accounts)
The character limit of the user account name and password is as follows.
User account name: Maximum of 31 characters
Password: Between 8 to 15 characters
Displays a list of registered users.
In addition, select the user and press the <SET> button to display the confirmation screen to delete a registered user.
Performs the settings for the streaming function.
Specifies the streaming format.
The items that can be set are as follows.
When [FILE FORMAT] is [MOV] and [REC FORMAT] is 1080/50p
[1920×1080-50fps 24M], [1920×1080-50fps 20M], [1920×1080-50fps 16M], [1280×720-50fps 14M], [1280×720-50fps 8M], [1280×720-50fps 3M], [640×360-25fps 4M], [640×360-25fps 1.5M], [640×360-25fps 0.7M], [320×180-25fps 4M], [320×180-25fps 1.5M], [320×180-25fps 0.5M]
(Factory setting: [640×360-25fps 0.7M])
When [FILE FORMAT] is [MOV] and [REC FORMAT] is 1080/59.94p
[1920×1080-60fps 24M], [1920×1080-60fps 20M], [1920×1080-60fps 16M], [1280×720-60fps 14M], [1280×720-60fps 8M], [1280×720-60fps 3M], [640×360-30fps 4M], [640×360-30fps 1.5M], [640×360-30fps 0.7M], [320×180-30fps 4M], [320×180-30fps 1.5M], [320×180-30fps 0.5M]
(Factory setting: [640×360-30fps 0.7M])
When [FILE FORMAT] is [MOV] and [REC FORMAT] is 1080/50i or 1080/25p
[1920×1080-25fps 14M], [1920×1080-25fps 6M], [1920×1080-25fps 1M], [1280×720-25fps 8M], [1280×720-25fps 2M], [1280×720-25fps 1M], [640×360-25fps 4M], [640×360-25fps 1.5M], [640×360-25fps 0.7M], [320×180-25fps 4M], [320×180-25fps 1.5M], [320×180-25fps 0.5M]
(Factory setting: [640×360-25fps 0.7M])
When [FILE FORMAT] is [MOV] and [REC FORMAT] is 1080/59.94i or 1080/29.97p
[1920×1080-30fps 14M], [1920×1080-30fps 6M], [1920×1080-30fps 1M], [1280×720-30fps 8M], [1280×720-30fps 2M], [1280×720-30fps 1M], [640×360-30fps 4M], [640×360-30fps 1.5M], [640×360-30fps 0.7M], [320×180-30fps 4M], [320×180-30fps 1.5M], [320×180-30fps 0.5M]
(Factory setting: [640×360-30fps 0.7M])
When [FILE FORMAT] is [MOV] and [REC FORMAT] is 1080/23.98p
[1920×1080-24fps 14M], [1920×1080-24fps 6M], [1920×1080-24fps 1M]
(Factory setting: [1920×1080-24fps 1M])
Sets whether to start streaming with operation of the camera or operation of the application software.
The items that can be set are as follows.
[CAMERA], [RECEIVER]
(Factory setting: [RECEIVER])
Selects the internal memory of the camera or the memory card as the reference location for the transfer destination when starting a stream with the operation of the camera.
The items that can be set are as follows.
[MEMORY], [SD CARD]
(Factory setting: [MEMORY])
Enter the destination URL in the rtmp://(IP address):(port number)/(path) format. (511 characters or less)
The settings file is imported from the memory card and reflected in the menu when [CONNECTION INFO.] is [SD CARD].
The items that can be selected are as follows.
[YES], [NO]
Encrypts and saves the information of the destination URL to the memory card.
The items that can be selected are as follows.
[YES], [NO]
Starts streaming.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [OFF])
Performs settings related to NDI|HX.
Displays whether the NDI|HX function is enabled. (Cannot be changed)
[--] |
Not active. |
[NDI|HX] |
Active. |
Specifies the streaming format.
The items that can be set are as follows.
When [FILE FORMAT] is [MOV] and [REC FORMAT] is 1080/50p
[1920×1080-50fps 24M], [1920×1080-50fps 16M], [1920×1080-50fps 10M], [1920×1080-50fps 8M], [1280×720-50fps 14M], [1280×720-50fps 10M], [1280×720-50fps 6M]
(Factory setting: [1920×1080-50fps 10M])
When [FILE FORMAT] is [MOV] and [REC FORMAT] is 1080/59.94p
[1920×1080-60fps 24M], [1920×1080-60fps 16M], [1920×1080-60fps 10M], [1920×1080-60fps 8M], [1280×720-60fps 14M], [1280×720-60fps 10M], [1280×720-60fps 6M]
(Factory setting: [1920×1080-60fps 10M])
When [FILE FORMAT] is [MOV] and [REC FORMAT] is 1080/50i or 1080/25p
[1920×1080-25fps 14M], [1920×1080-25fps 10M], [1920×1080-25fps 6M], [1280×720-25fps 8M], [1280×720-25fps 4M], [1280×720-25fps 2M]
(Factory setting: [1920×1080-25fps 10M])
When [FILE FORMAT] is [MOV] and [REC FORMAT] is 1080/59.94i or 1080/29.97p
[1920×1080-30fps 14M], [1920×1080-30fps 10M], [1920×1080-30fps 6M], [1280×720-30fps 8M], [1280×720-30fps 4M], [1280×720-30fps 2M]
(Factory setting: [1920×1080-30fps 10M])
Clears the activation license information that is saved.
The items that can be selected are as follows.
[YES], [NO]
Performs settings related to the wired LAN.
Displays the MAC address for the wired LAN of the camera. (Cannot be changed)
[DHCP] |
Sets whether to use the automatic acquisition through DHCP or to use the DHCP server function of the camera. [OFF]: Does not use DHCP. [CLIENT]: Performs automatic acquisition through DHCP. The address from 192.168.0.10 through 192.168.0.255 is automatically assigned when the IP address cannot be acquired automatically within one minute. [SERVER]: Enables the DHCP server function of the camera.
|
[IP ADDRESS] |
Sets the IP address.
|
[SUBNET MASK] |
Sets the subnet mask.
|
[DEFAULT GATEWAY] |
Sets the default gateway.
|
[PRIMARY DNS] |
Sets the primary DNS server.
|
[SECONDARY DNS] |
Sets the secondary DNS server.
|
[ENABLE/DISABLE] |
Sets whether to use IPv6. [ENABLE]: Uses IPv6. [DISABLE]: Does not use IPv6.
|
[DHCP] |
Sets whether to use automatic acquisition via DHCP. [OFF]: Does not use DHCP. [CLIENT]: Performs automatic acquisition through DHCP.
|
[IP ADDRESS] |
Sets the IP address.
|
[PREFIX LENGTH] |
Sets the prefix length of the subnet.
|
[DEFAULT GATEWAY] |
Sets the default gateway.
|
[PRIMARY DNS] |
Sets the primary DNS server.
|
[SECONDARY DNS] |
Sets the secondary DNS server.
|
Performs settings related to the wireless LAN.
Displays the wireless LAN MAC address of the camera. (Cannot be changed)
Sets the connection method to the wireless LAN.
[DIRECT] |
It can connect directly without using a wireless access point to a device equipped with wireless LAN such as a tablet terminal. |
[INFRA(SELECT)] |
Connects to the wireless access point. The access point is selected from the list. |
[INFRA(MANUAL)] |
Connects to the wireless access point. Wireless access point is entered manually. |
(Factory setting: [DIRECT])
Enters or displays the network name of the camera (SSID). (32 characters or less)
(Factory setting: [AG-CX350])
Switches between two communication methods ([2.4GHz] or [5GHz]) when the [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [DIRECT] is selected.
The items that can be set are as follows.
[2.4GHz], [5GHz]
(Factory setting: [2.4GHz])
Sets the channel to be used when connected to the wireless LAN with following items set.
The [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [DIRECT]
The [NETWORK] menu → [WLAN PROPERTY] → [BAND] → [2.4GHz]
The items that can be set are as follows.
[AUTO], [CH1], [CH6], [CH11]
(Factory setting: [AUTO])
Sets the channel to be used when connected to the wireless LAN with following items set.
The [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [DIRECT]
The [NETWORK] menu → [WLAN PROPERTY] → [BAND] → [5GHz]
The items that can be set are as follows.
[AUTO], [CH36], [CH40], [CH44], [CH48], [CH100], [CH104], [CH108], [CH112], [CH116], [CH132], [CH136], [CH140], [CH149], [CH153], [CH157], [CH161], [CH165]
(Factory setting: [AUTO])
Sets the encryption method when the [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [INFRA(SELECT)]/[INFRA(MANUAL)] is selected.
The items that can be set are as follows.
[WPA-TKIP], [WPA-AES], [WPA2-TKIP], [WPA2-AES], [NONE]
(Factory setting: [WPA2-AES])
Sets the encryption key. Set the key using a string of 8 to 63 characters or a hexadecimal number with 64 digits.
(Factory setting: [01234567890123456789abcdef])
[DHCP] |
Sets whether to use the automatic acquisition through DHCP or to use the DHCP server function of the camera. [OFF]: Does not use DHCP. [CLIENT]: Performs automatic acquisition through DHCP if connecting by setting [WLAN PROPERTY] → [TYPE] → [INFRA(SELECT)]/[INFRA(MANUAL)]. [SERVER]: Enables the DHCP server function of the camera when connecting by setting [WLAN PROPERTY] → [TYPE] → [DIRECT].
|
[IP ADDRESS] |
Sets the IP address.
|
[SUBNET MASK] |
Sets the subnet mask.
|
[DEFAULT GATEWAY] |
Sets the default gateway.
|
[PRIMARY DNS] |
Sets the primary DNS server.
|
[SECONDARY DNS] |
Sets the secondary DNS server.
|
Displays the status of the network function.
Performs the various operations related to the network function.
Restores the network setting status to the factory settings.
Sets the time to accept EASY IP Setup Software.
The items that can be set are as follows.
[DISABLE], [20 MIN.], [UNLIMITED]
(Factory setting: [DISABLE])
Configure the individual device names to display in EASY IP Setup Software. (15 characters or less)
(Factory setting: [AG-CX350])