The camera can display two types of zebra patterns to the output image from the LCD monitor.
Select the [VIDEO OUT/LCD/VF] menu → [EI ASSIST] → [ZEBRA] → [ON].
Select [MOMENT]. The zebra pattern is displayed for approximately five seconds when the the USER button to which [ZEBRA] is assigned is pressed or the USER button icon is touched.
Factory setting: [OFF]
Setting the detection level
Set each item in the [VIDEO OUT/LCD/VF] menu → [EI ASSIST].
Item
Description of settings
[ZEBRA1 DETECT]
Sets the detection level of zebra pattern 1.
[0%]…[109%]
(Factory setting: [80%])
[ZEBRA2 DETECT]
Sets the detection level of zebra pattern 2.
[0%]…[109%]
(Factory setting: [100%])
[ZEBRA2]
Enables/disables zebra pattern 2 and selects [SPOT].