Precautions for Use

In addition to the safety precautions given in “Read this first!”, also observe the following instructions.

Handle carefully

  • Do not drop the product or subject it to a strong impact. Doing so may cause a failure or accident.

Avoid using the unit outdoors

  • Use the product in an ambient temperature of 0 °C to 40 °C (32 °F to 104 °F). Avoid using the product in a cold place where the temperature drops below 0 °C (32 °F) or in a hot place where the temperature rises above 40 °C (104 °F) because an extremely low or high temperature will adversely affect the internal parts.

Turn off the power before connecting or disconnecting cables

  • Before connecting or disconnecting the cables, be sure to turn the power off.

Avoid humidity and dust

  • Avoid using the product in a very humid or dusty place because a lot of humidity and dust will cause damage to the internal parts.

Cleaning

  • Turn the power off and wipe the product with a dry cloth.
  • To remove stubborn dirt, dip a cloth into a diluted solution of kitchen detergent (neutral detergent), wring it out well, and wipe the product gently. Then, wipe the product with a cloth dampened with water. Finally, wipe the product with a dry cloth.

NOTE

  • Avoid using benzine, paint thinners and other volatile fluids.
  • If a chemical cleaning cloth is to be used, carefully read through the precautions for its use.

Optical fiber multi cable

  • When the optical fiber connectors of the optical fiber multi cable (sold separately) become dirty, the optical signal transmission state will deteriorate. Use commercially available optical connector cleaner to clean the optical connector end faces in accordance with the instructions.

Consumable parts

  • The cooling fan is a consumable part. The replacement cycle is approximately 10 years (when used approximately 8 hours per day).

    Contact your dealer to request cooling fan replacement.

Disposal of the unit

  • When the unit has reached the end of its service life and is to be disposed of, ask a qualified contractor to dispose of the unit properly in order to protect the environment.

■ Information on software used with this product

  • This product includes software licensed under GNU General Public License (GPL) and GNU Lesser General Public License (LGPL), and customers are hereby notified that they have rights to obtain, re-engineer, and redistribute the source code of these software.
  • This product includes software licensed under MIT-License.
  • This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/).
  • This product includes software licensed under OpenBSD License.

For details on each license, refer to the terms of license.

The terms of license can be displayed using the following method.

  • Select [MAINTENANCE] menu → [SD CARD] menu → [OSS LICENSE] → [YES] and the file is written to an SD card inserted in this camera.

    Insert the SD card to which the file has been written into a computer and select "LICENSE.TXT".

For details on these descriptions (originally provided in English) and how to obtain the source code, visit the following website.

https://pro-av.panasonic.net/

We do not accept inquiries about the details of the source code obtained by the customer.

Excluding the open source software licensed based on GPL/LGPL, etc., transferring, copying, reverse assembling, reverse compiling, and reverse engineering of the software included in the camera is prohibited. Also, exporting of any software included in the camera against the export laws and regulations is prohibited.