- Top
- Specifications
Specifications
General
Power supply |
AK-HCU250P/AK-HCU250PS : 100 V - 120 V AC (), 50 Hz/60 Hz AK-HCU250E/AK-HCU250ES : 100 V - 240 V AC (), 50 Hz/60 Hz |
Current consumption |
3 A |
Capacity for supplying power to a camera |
DC () 190 V , 0.6 A |
indicates safety information.
Operating temperature |
0 °C to 40 °C (32 °F to 104 °F) |
Humidity |
10% to 90% (no condensation) |
Storage temperature |
-20 °C to 60 °C (-4 °F to 140 °F) |
Dimensions (Width×Height×Depth) |
424 mm × 88 mm × 401 mm (16-5/8 inches × 3-7/16 inches × 15-13/16 inches) (excluding protrusions) |
Weight |
Approx. 7.4 kg (16.28 lb) (main unit only) |
Basic items
System format |
1920x1080/59.94p/50p/29.97p/25p/23.98p |
Image input/output sections
<HD SDI1-3> terminal |
BNC × 3 3G/1.5G-SDI: 0.8 V [p-p], 75 Ω |
<HD SDI PM> terminal |
BNC × 1 1.5G-SDI: 0.8 V [p-p], 75 Ω |
<RET IN1-2> terminal |
BNC × 2 3G/1.5G-SDI: 0.8 V [p-p], 75 Ω |
<HD SDI PROMPTER IN> terminal |
BNC × 1 3G/1.5G-SDI: 0.8 V [p-p], 75 Ω |
<HD SDI PROMPTER OUT> terminal |
BNC × 1 3G/1.5G-SDI: 0.8 V [p-p], 75 Ω |
<HD TRUNK OUT> terminal |
BNC × 1 3G/1.5G-SDI: 0.8 V [p-p], 75 Ω |
<REF> terminal |
BNC × 2 <Input> 3-value sync/1 V VBS signal [p-p], 75 Ω <Loop-through output> 3-value sync/1 V VBS signal [p-p], 75 Ω |
<ANALOG PROMPT IN> terminal |
BNC × 1 VBS signal: 1 V [p-p], 75 Ω |
<ANALOG PROMPT OUT> terminal |
BNC × 1 VBS signal: 1 V [p-p], 75 Ω |
Audio output sections
<MIC1-2> terminal |
XLR x 2, 3-pin male 0dBm/600 Ω |
Intercom section
<INTERCOM> terminal |
XLR x 1, 5-pin female |
Other input/output sections
<CAMERA> terminal |
Optical fiber multi connector × 1 AK-HCU250P/AK-HCU250E: Tajimi Electronics Co., Ltd., AK-HCU250PS/AK-HCU250ES: LEMO |
<ROP> terminal |
10 pins × 2 |
<COMMUNICATION> terminal |
25 pins × 1 |
<LAN> terminal |
RJ45 × 1 |
The symbols on this product (including the accessories) represent the following:
AC DC Power on Power off |
NOTE
|
Inrush current, measured according to European standard EN55103-1, on initial switch-on: 3 A, after a supply interruption of 5 s: 80 A