This is the selection screen for the BAR ID menu.
___ indicates factory default settings.
Item |
Setting value |
Setting details |
BAR ID SWITCH |
ON OFF |
Shows/hides the ID superimposed on the color bars. |
BRIGHTNESS |
0 to 100% |
Sets the luminance for the ID display. |
ID1 POSITION V |
0 to 05 |
Sets the vertical position for the start of the ID1 display. |
ID1 POSITION H |
0 to 15 |
Sets the horizontal position for the start of the ID1 display. |
ID1 |
## (Max. 16 characters) |
Set camera ID1. Characters which can be used: Alphanumeric characters, spaces, ! # % & ' ( ) * + , - . / : ; < = > ? [ ] _ ˜
|
ID2 POSITION V |
0 to 05 |
Sets the vertical position for the start of the ID2 display. |
ID2 POSITION H |
0 to 15 |
Sets the horizontal position for the start of the ID2 display. |
ID2 |
Spaces (Max. 16 characters) |
Set camera ID2. Characters which can be used: Alphanumeric characters, spaces, ! # % & ' ( ) * + , - . / : ; < = > ? [ ] _ ˜
|
OFFSET V |
00 to 89 |
Specify the origin (upper left) in the vertical direction of the character drawing area in pixels. |
OFFSET H |
00 to 79 |
Specify the origin (upper left) in the horizontal direction of the character drawing area in pixels. |