Operation

Symptom

Cause and Measure

Cannot turn the power on.
  • Is the power cable connected to the outlet properly?

Cannot perform operation from an ROP connected with an IP connection.
  • Is the power on?
    • If the [POWER] lamp of this unit is off, the power of this unit is not turned on.
  • Is a valid IP address set on the unit?
  • Is the unit you want to operate selected correctly?
  • Is the ROP connected correctly?
    • Also refer to the operating instructions for the ROP.
  • The version of the ROP may need to be upgraded to enable support for the unit.
    • Consult your dealer.