Connecting the <DC OUT/RS> terminal to the external recording start/stop switch

The <DC OUT/RS> terminal can supply 1.0 A current.

Recording start/stop can be controlled by connecting an external switch to this terminal.

An LED connected to this terminal can also be used as a tally lamp. This is useful for shooting video when fixing the camera on a crane.

co_body_dcout_terminal
  1. GND

  2. TALLY OUT

    Open collector output on the camera side

    Tally lamp on

    Low impedance

    Tally lamp off

    High impedance

  3. Recording start/stop switch

    This is connected in parallel to the <REC> button on the camera or the VTR button on the lens.

  4. +12 V