• Top
• Viewfinder
• Viewfinder status display
• Lamp display

Lamp display

1. Green tally lamp

   Lights up in green when green tally signals are received.

2. Red tally/recording lamp

   Lights up in red during recording or when red tally signals are received.

   This will illuminate in red during recording with an external device when [SDI REC REMOTE] is set to [ON], or [SDI RAW] is set to anything other than [OFF].

3. Warning lamp

   Flashes or lights up when a warning occurs with the camera.

4. Battery lamp

   Starts flashing when the remaining battery level is low. Illuminates when it reaches the battery end.