Sets the input/output function of audio.
[INPUT SETTINGS]
[INPUT1 MIC LEVEL]
Sets the input level of the external microphone connected to the <AUDIO INPUT 1> terminal. Enabled when the external microphone is connected and the <INPUT1> switch is set to <MIC> or <+48V>.
The items that can be set are as follows.
(Factory setting: [−50dB])
[INPUT2 MIC LEVEL]
Sets the input level of the external microphone connected to the <AUDIO INPUT 2> terminal. Enabled when the external microphone is connected and the <INPUT2> switch is set to <MIC> or <+48V>.
The items that can be set are as follows.
(Factory setting: [−50dB])
[INPUT1 LINE LEVEL]
Sets the audio input level of the audio device connected to the <AUDIO INPUT 1> terminal. Enabled when the audio device is connected and the <INPUT1> switch is set to <LINE>.
The items that can be set are as follows.
(Factory setting: [0dB])
[INPUT2 LINE LEVEL]
Sets the audio input level of the audio device connected to the <AUDIO INPUT 2> terminal. Enabled when the audio device is connected and the <INPUT2> switch is set to <LINE>.
The items that can be set are as follows.
(Factory setting: [0dB])
[REC CH SETTINGS]
[CH1 LEVEL]
Sets if the recording level adjustment method for audio channel 1 is to be automatic or manual.
If [AUDIO CH1 LEVEL] is assigned to the USER button, pressing the USER button switches [AUTO]/[MANUAL].
The items that can be set are as follows.
(Factory setting: [AUTO])
[CH2 LEVEL]
Sets if the recording level adjustment method for audio channel 2 is to be automatic or manual.
If [AUDIO CH2 LEVEL] is assigned to the USER button, pressing the USER button switches [AUTO]/[MANUAL].
The items that can be set are as follows.
(Factory setting: [AUTO])
[CH3 LEVEL]
Sets if the recording level adjustment method for audio channel 3 is to be automatic or manual.
The items that can be set are as follows.
(Factory setting: [AUTO])
[CH4 LEVEL]
Sets if the recording level adjustment method for audio channel 4 is to be automatic or manual.
The items that can be set are as follows.
(Factory setting: [AUTO])
[CH3 LEVEL CONTROL]
The recording level can be manually adjusted when [CH3 LEVEL] adjusting the recording level of the audio channel 3 is set to [MANUAL].
The items that can be set are as follows.
(Factory setting: [70])
[CH4 LEVEL CONTROL]
The recording level can be manually adjusted when [CH4 LEVEL] adjusting the recording level of the audio channel 4 is set to [MANUAL].
The items that can be set are as follows.
(Factory setting: [70])
[CH1 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 1.
The items that can be set are as follows.
(Factory setting: [OFF])
[CH2 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 2.
The items that can be set are as follows.
(Factory setting: [OFF])
[CH3 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 3.
The items that can be set are as follows.
(Factory setting: [OFF])
[CH4 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 4.
The items that can be set are as follows.
(Factory setting: [OFF])
[CH1 LIMITER]
Enables/disables the limiter when the method to adjust the audio input level for audio channel 1 is manual.
The items that can be set are as follows.
(Factory setting: [OFF])
[CH2 LIMITER]
Enables/disables the limiter when the method to adjust the audio input level for audio channel 2 is manual.
The items that can be set are as follows.
(Factory setting: [OFF])
[CH3 LIMITER]
Enables/disables the limiter when the method to adjust the audio input level for audio channel 3 is manual.
The items that can be set are as follows.
(Factory setting: [OFF])
[CH4 LIMITER]
Enables/disables the limiter when the method to adjust the audio input level for audio channel 4 is manual.
The items that can be set are as follows.
(Factory setting: [OFF])
[HEAD ROOM]
Sets the headroom (standard level).
The items that can be set are as follows.
(Factory setting: [18dB])
[OUTPUT SETTINGS]
[AUDIO OUT]
Sets the audio channel and the format to output from the <AV OUT> terminal, the headphone terminal, and the built-in speaker.
If [AUDIO OUT] is assigned to the USER button, pressing the USER button switches the setting.
When [CH1]/[CH2]/[CH1/2 STEREO]/[CH1/2 MIX] is set, toggles [CH1], [CH2], [CH1/2 STEREO], and [CH1/2 MIX] in order. When [CH3]/[CH4]/[CH3/4 STEREO]/[CH3/4 MIX] is set, toggles [CH3], [CH4], [CH3/4 STEREO], and [CH3/4 MIX] in order.
[CH1] |
Outputs the signal for audio channel 1 as monaural. |
[CH2] |
Outputs the signal for audio channel 2 as monaural. |
[CH1/2 STEREO] |
Outputs the signals of the audio channel 1 and the audio channel 2 as stereo. Outputs as monaural from the built-in speaker. |
[CH1/2 MIX] |
Mixes the signals of the audio channel 1 and the audio channel 2 and outputs as monaural. |
[CH3] |
Outputs the signal for audio channel 3 as monaural. When [FILE FORMAT] is set to [AVCHD], it will operate in [CH1]. |
[CH4] |
Outputs the signal for audio channel 4 as monaural. When [FILE FORMAT] is set to [AVCHD], it will operate in [CH2]. |
[CH3/4 STEREO] |
Outputs the signals of the audio channel 3 and the audio channel 4 as stereo. Outputs as monaural from the built-in speaker. When [FILE FORMAT] is set to [AVCHD], it will operate in [CH1/2 STEREO]. |
[CH3/4 MIX] |
Mixes the signals of the audio channel 3 and the audio channel 4 and outputs as monaural. When [FILE FORMAT] is set to [AVCHD], it will operate in [CH1/2 MIX]. |
(Factory setting: [CH1/2 STEREO])
[HDMI OUT CH]
Selects the audio channel to be output from the <HDMI> terminal.
[CH1/2] |
Outputs the audio signals of the audio channel 1 and the audio channel 2 as stereo. |
[CH3/4] |
Outputs the audio signals of the audio channel 3 and the audio channel 4 as stereo. |
[CH1/2/3/4] |
Outputs the audio signals of the audio channels 1 to 4 as 4 channels. |
(Factory setting: [CH1/2])
[ALARM]
[BATTERY END]
Sets whether to sound the alarm when the remaining battery level is exhausted.
The items that can be set are as follows.
(Factory setting: [OFF])
[MEDIA END]
Sets whether to sound the alarm when the remaining recording capacity of the memory card is exhausted.
The items that can be set are as follows.
(Factory setting: [OFF])
[WARNING]
Sets whether to sound the alarm when a system error or warning occurs.
The items that can be set are as follows.
(Factory setting: [OFF])