Recording function that cannot be used simultaneously
Depending on the recording function that is set, there are recording functions that cannot be used simultaneously.
Meaning of the symbols used in the table are as follows.
✓: Can be used simultaneously.
—: Cannot be used simultaneously.
Recording function that is set | ||||
|---|---|---|---|---|
Recording function to additionally set | Pre-recording*1*2 | Relay recording | Simultaneous recording | Interval recording*3*4*6*7*9 |
Pre-recording*1*2 |
✓ |
✓ |
— | |
Relay recording |
✓ |
— |
— | |
Simultaneous recording |
✓ |
— |
✓ | |
Interval recording*3*4*6*7*9 |
— |
— |
✓ |
|
Background recording*1*3*8*9*10 |
— |
— |
— |
— |
VFR/Super slow recording*3*4*5*10 |
— |
— |
— |
— |
Proxy recording*11*12*13 |
✓ |
✓ |
— |
— |
Recording function that is set | |||
|---|---|---|---|
Recording function to additionally set | Background recording*1*3*8*9*10 | VFR/Super slow recording*3*4*5*10 | Proxy recording*11*12*13 |
Pre-recording*1*2 |
— |
— |
✓ |
Relay recording |
— |
— |
✓ |
Simultaneous recording |
— |
— |
— |
Interval recording*3*4*6*7*9 |
— |
— |
— |
Background recording*1*3*8*9*10 |
— |
— | |
VFR/Super slow recording*3*4*5*10 |
— |
— | |
Proxy recording*11*12*13 |
— |
— |
|
Time code is fixed to free run.
The pre-recording is canceled once when three hours has passed without starting the recording.
Cannot set simultaneously in the following cases.
When recording in AVCHD format
Time code is fixed to recording run.
This cannot be set when the frequency of the [SYSTEM] menu → [REC FORMAT] is set to 50.00i/59.94i.
The time code is fixed to [NDF].
The [VIDEO OUT/LCD/VF] menu → [SDI OUT] → [SDI REC REMOTE] and the [VIDEO OUT/LCD/VF] menu → [HDMI OUT] → [HDMI REC REMOTE] will not operate.
This will not operate when anything other than 1080p/1080i is selected in the [SYSTEM] menu → [REC FORMAT].
Cannot set simultaneously when recording format is set to AVC-Intra 200/AVC-Intra 100/AVC-Intra 50.
Cannot set simultaneously in the following cases.
When recording in P2 format
Cannot be set when the file format is MOV or AVCHD.
Cannot be set when the recording format is AVC-G12.
Cannot be simultaneously used with recording of the time stamp and the streaming on network.