Shot mark recording function

Shot mark is a marker attached to the thumbnail of a clip to distinguish from other clips.

It is possible to display or play back only the clips with the shot mark.

Adding shot mark

NOTE

A shot mark can be added/cleared only on the clips in P2 format.
A shot mark can also be added while displaying the thumbnail. (Adding shot mark to a clip)
A shot mark cannot be added during recording in case of interval recording.
A shot mark can only be added from the thumbnail display after recording in case of simultaneous recording.
[SHOT MARK INVALID] is displayed when the USER button is pressed if the operation is invalid.
Adding/clearing of the shot mark is not possible while playing back or paused during the playback.
There are following restrictions when a shot mark is to be added/cleared for a linked clip such as a clip recorded across multiple memory cards, etc.
- All the memory cards constructing the clip must be inserted into the card slots.
- A shot mark is added only to the first clip of the linked clips.